Hydraulic oils - Import export

Hydraulic oil for use in all areas of the food processing technology Compressor oil for screw and multiple vane rotary vacuum pumps at required oil ISO VG 46 Lubrication of other machine elements, such as rolling and friction bearings in the food processing technology Advantages and benefits NSF H1 registered Long operating times through excellent oxidation stability Good low-temperature behaviour Wide operating temperature range Resistant to cold and hot water, water steam, disinfectants and cleaning agents Reduces friction and wear Good corrosion protection Free of mineral oil Conforms to VDL requirements

INOX HLP 10 INOX HLP 15 INOX HLP 22 INOX HLP 32 INOX HLP 46 INOX HLP 68 INOX HLP 100

Clients should use original Caterpillar lubricants for several key reasons: 1. **Optimal Performance**: These lubricants are tailored for Caterpillar engines, ensuring peak performance and efficiency. 2. **Equipment Longevity**: They offer superior protection against rust, corrosion, and wear, extending equipment life. 3. **Warranty Compliance**: Using non-approved lubricants can void the warranty. 4. **Reduced Downtime**: Proper lubrication minimizes breakdowns, enhancing productivity. 5. **Fuel Efficiency**: Caterpillar lubricants reduce friction, improving fuel efficiency. 6. **Engine Cleanliness**: They prevent sludge and deposits, keeping engines clean and efficient. 7. **Environmental Considerations**: These lubricants are often more eco-friendly, reducing emissions. 8. **Compatibility and Innovation**: They ensure compatibility with the latest Caterpillar advancements. 9. **Comprehensive Support**: Caterpillar provides extensive support and resources for users.

Aging-resistant hydraulic oils based on mineral oils, with superior corrosion and wear protection even under extreme loads.

The damping fluid used by LEBENDämpfungstechnik GmbH is used with different consistency under the name COMPENSOL®. Each damping medium can be chosen to meet the requirements. We provide the ideal hydraulic oil (socalled medium) for use in temperaturecontrolled indoor areas up to extreme high temperatures or low temperatures. For special applications, e.g. at temperatures above +80° C or below 40° C, we use a pastelike dispersion as damping medium. This medium solidifies at rest to an apparently solid mass and only becomes flowable under the action of force. When the load ends, it returns to its apparently solid original state. This dispersion has the following properties chemically a colloidal solid dispersion physically a nonNewtonian pseudo plastic Bingham fluid with viscous properties It is a paste or better a coagulation structure and deforms plastically under mechanical stress.

Is a high performance hydraulic system oil which is suitable to use in wide temperature range. It can be used in all types of construction equipment and hydraulic system even under high pressure due to its special additive package in its content. It provides superior protection in hydraulic systems under extreme operating conditions.

Is a high performance hydraulic system oil which is suitable to use inwide temperature range. It can be used in all types of construction equipment and hydraulic system even under high pressure due to its special additive package in its content. It provides superior protection in hydraulic systems under extreme operating conditions.

It is hydraulic system oil that is formulated with highly well refined para nic base oils and AW corrosion preventive additives. It is intended to be used with the purpose of load carrying in industrial load transmission systems and in hydraulic equipment of heavy earth movers.

Hydraulic oil for use in all areas of the food processing technology Compressor oil for screw and multiple vane rotary vacuum pumps at required oil ISO VG 68 Lubrication of other machine elements, such as rolling and friction bearings in the food processing technology Advantages and benefits NSF H1 registered Long operating times through excellent oxidation stability Good low-temperature behaviour Wide operating temperature range Resistant to cold and hot water, water steam, disinfectants and cleaning agents Reduces friction and wear Good corrosion protection Free of mineral oil Conforms to VDL requirements

Hydraulic oil for use in all areas of the food processing technology Compressor oil for screw and multiple vane rotary vacuum pumps at required oil ISO VG 32 Lubrication of other machine elements, such as rolling and friction bearings in the food processing technology Advantages and benefits NSF H1 registered Long operating times through excellent oxidation stability Good low-temperature behaviour Wide operating temperature range Resistant to cold and hot water, water steam, disinfectants and cleaning agents Reduces friction and wear Good corrosion protection Free of mineral oil Conforms to VDL requirements

Media: hydraulic oil, water, air, gas, aggressive media

Media: hydraulic oil, cooling water, compressed air, fire fighting water, Electric signal lines, electric power lines Constructions from 2 ways up to 14 ways

universal usecooling, heating, clamping, moving segment design sealingmaterial PTFECompound robust available in stainless steel PRESSURE MAXIMUM 10,0 bar air nontoxic gases water 250,0 bar hydraulic oil TEMPERATURE MAXIMUM 90 °C air hydraulic oil nontoxic gases vacuum water SPEED MAXIMUM 10 1/min 250 bar 80 1/min 50 bar

universal usecooling, heating, clamping, moving segment design sealingmaterial PTFECompound robust available in stainless steel PRESSURE MAXIMUM 10,0 bar air nontoxic gases water 250,0 bar hydraulic oil TEMPERATURE MAXIMUM 90 °C air hydraulic oil vacuum water SPEED MAXIMUM 10 1/min 250 bar 250 1/min 60 bar

universal usecooling, heating, clamping, moving segment design sealingmaterial PTFECompound robust available in stainless steel PRESSURE MAXIMUM 10,0 bar air nontoxic gases water 250,0 bar hydraulic oil TEMPERATURE MAXIMUM 90 °C air hydraulic oil nontoxic gases vacuum water SPEED MAXIMUM 10 1/min 250 bar 250 1/min 60 bar

universal usecooling, heating, clamping, moving segment design sealingmaterial PTFECompound robust available in stainless steel PRESSURE MAXIMUM 10,0 bar air nontoxic gases water 250,0 bar hydraulic oil TEMPERATURE MAXIMUM 90 °C air hydraulic oil nontoxic gases vacuum water SPEED MAXIMUM 10 1/min 250 bar 250 1/min 60 bar

single inlet/outlet line rotor + housing, material stainless steel tungsten carbide/tungsten carbide seal 160,0 bar hydraulic oil water TEMPERATURE MAXIMUM 90 °C hydraulic oil water SPEED MAXIMUM 1500 1/min DN 8 (1/4") DN 10 (3/8") DN 15 (1/2") SIZEDN 8 (1/4") DN 10 (3/8") DN 15 (1/2")

The innovative LAWECO CHAIN-LINE lifting platform technology unites all advantages of belts and spindles. Mechanically driven by a push-chain, this technology achieves maximum performances without the use of hydraulic oil. Due to a particularly harmonious motion sequence and the excellent load change behaviour in each lift position, the CHAIN-LINE is the preferred solution for designers who place an extremely high value on efficiency and precision for their area of responsibility. Unsurpassed precision LAWECO push-chain lifting platforms convince with a load behaviour and maximum positioning precision which were almost unachievable in the past. Unrestricted availability Almost maintenance free, the robust and low failure construction permits fast component replacement. Safety for the environment and employees The intelligent design does without hydraulic oil. Optional contact rails and bellows increase safety.

One of the most prominent requirements in the automotive industry is exceptional availability together with precision as well as the conformity with strict specifications regarding cleanliness. For this reason, here the low maintenance and hydraulic oil free drive concepts, such as spindles, belts and push-chains are in use.

The Pump Set is suitable for thin-bodied, aggressive and non-flammable media. Perfectly suited for the extraction or decanting of mineral oils. * Media examples: Diesel, heating oil, hydraulic oil, machine oil and motor oil etc. * Pump tube equipped with Lutz original hand wheel * Suitable for filling or decanting alternative fuels Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant ETFE shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are interchangeable * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌

They are high performance, high viscosity index hydraulic oils specially designed with advanced viscosity index developer to meet the requirements of modern hydraulic systems operating at variable ambient temperatures. They provide high performance by providing excellent lubrication in piston or gear pumps, presses and other hydraulic system equipment which operate under di cult conditions with the help of additives that provide anti-wear and thermal stability with the formulation which enables stability in a wide temperature range.

Wrapped composite sliding bearing steel / Special PTFE coated Maintenance-free dry sliding bearing | DIN 1494 / ISO 3547 TEF-MET/P is a versatile dry sliding bearing with PTFE sliding layer. Therefore, no lubrication is necessary. However, it is very well suited for lubricated applications (e.g. hydraulic oil lubrication). For technical details, please visit the product page on our website!

Multipurpose oil for bearing, lever and joint lubrication Hydraulic oil for use in all areas in which physiologically harmless are required Compressor oil for piston compressors for prescribed oil ISO VG 100 Advantages and benefits NSF H1 registered Long economic operating times thanks to optimal additives against oxidation and ageing Good cold behaviour Resistant to cold and hot water, steam as well as disinfectants and cleaning agents For universal use due to long-term lubrication and high adhesive strength Good wear protection Tasteless and odourless Conforms to VDL requirements

For all types of mineral oil products, especially technical oils and lubricants, petrol and benzole mixtures 50 : 50, leaded and unleaded fuels with an aromatic content up to 50%, diesel fuels, heating oils, hydraulic oils based on mineral oil. Barrel-polishable, vacuum-constant finish. Temperature resistant from –35°C to +90°C. Conforms to DIN EN 12115. Construction: Oil & petrol-resistant, conductive NBR tube Tension and pressure resistant fabric inlays Embedded copper wire Weather-resistant, abrasion-resistant, conductive CR cover Interior and exterior smooth, fabric patterned Supplied by the roll or cut to length. Also available as spiral hose. Other versions and dimensions on request.

The new B3 Battery is a battery motor for demanding and efficient pump applications. The current-independent application range enables the greatest possible flexibility with the world's highest volume flow of a battery pump (up to 180 l/m). Perfectly suited for the extraction or transfer of mineral oils. * Media examples: Diesel, heating oil, hydraulic oil, machine oil and motor oil etc. * Pump tube equipped with Lutz original hand wheel * Suitable for filling or decanting alternative fuels Features & Advantages * wear-free, particularly low-noise BLDC motor *optimized drum emptying * Optimized Drum emptying *infinitely variable * extremely high performance with low weight * Maintenance without special tools * Sealing modules of the sealless (DL) pump can be replaced * long service life

The flow meter with display convinces with its simple, demand-oriented display, operability and compact design. Thanks to the rotating Oval gear meter and a magnet integrated in the measuring chamber, it enables the exact measurement of the volume flow and measures mineral oils and alternative fuels such as diesel, petrol etc. precisely, quickly and above all efficiently. * Media examples: Diesel, heating oil, hydraulic oil, machine oil and motor oil etc. * Quantity preselection can be retrofitted with a relay module at any time * Suitable for measuring alternative fuels Features & Advantages * Measurement according to the oval wheel principle * High measuring accuracy * Low pressure losses in the system * Measuring range from 3 l/min - 80 l/min * Low frictional resistance

The Drum pump is suitable for thin-bodied, aggressive and non-flammable media. Perfectly suited for the withdrawal or decanting of mineral oils. * Media examples: Diesel, heating oil, hydraulic oil, machine oil and motor oil etc. * Pump tube equipped with Lutz original hand wheel * Suitable for filling or decanting alternative fuels Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant ETFE shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are interchangeable * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌

The latest development in lifting platform technology is based on mechanical drive technology using belts. Hydraulic oil is not required. Due to a patented catch system, BELT-LINE meets the safety requirements laid down in DIN EN 1570. The combination of exemplary positioning accuracy, smooth running and long service life is the reason the BELT-LINE is an economical precision solution, and not only for sensitive areas. Exemplary smooth running BELT-LINE convinces with a low noise and harmonious movement sequence, paired with maximum lifting speed and positioning precision. Minimum maintenance time and costs without hydraulic oil In particular in sensitive areas, the robust BELT-LINE technology with its long operating life is the best possible solution. The low-wear components can be quickly replaced due to the modular design. Excellent load change behaviour In the design phase, particular emphasis was placed on developing an excellent load change behaviour. The resilient suspension behaviour is only surpassed by LAWECO push-chain lift platforms.