Horizontal presses - Import export

Hydraulic pull-in device for mounting bearings max. pulling force 100 kN, stroke up to 200 mm, horizontal design Application The bearing press is suitable for the simple mounting of bearings, plain bearings or sleeves/bushings by hydraulically pulling them into the bearing seat. Main areas of application - Industrial assembly workstations - Mounting bearings in housings - Maintenance work - Bearing assembly on large/heavy components Description The bearing press is designed for the hydraulic insertion of bearings into housing components and is available in a horizontal design. Guided on a knuckle boom crane with a balancer (not included in the delivery), the bearing press can be used ergonomically anywhere and can also be mounted on a trolley. The pullin cylinder can be used either from the right or left by converting the hydraulic cylinder. The device is operated by means of a twohand control.

Remove up to 85% of fluid from swarf and filter cake. Separate liquid from filter cake and swarf for optimal coolant recovery and savings on material disposal costs. Disposing hazardous grinding swarf or filter cake can be difficult and expensive. PRAB’s horizontal screw press processes material that is 40 to 50% wet with coolant or cutting oils to remove up to 85% of fluid. Can be used as a stand-alone unit or in combination with the Dualpak™ Briquetter for coolant recovery and retainment of up to 95% of fluids.

Machine features Clamping force 1,950 kN. Size of the platens 450 x 450 mm. Injection volume 1,000 cm³. The H49 is designed for Automated production. Injection molding (more or less simple parts). Low floor space and height requirement. An optimized cycle time. etc

Machine features Clamping force 4,000 kN. Platen size 750 x 800 x 80 mm. Injection volume 2,000 cm³ or 5,000 cm³. The H610 allows Automated productions. Injection molding (more or less simple parts). A small footprint and height. An optimized cycle time. etc.

REP AUTOMATED SOLUTIONS Automation is adapted to the needs and objectives of each customer. An infinite number of possibilities for the following operations Feeder channels Evacuation Flash and gum cutters Evacuation Spraying of release agent and / or cleaning of the mold Loading of inserts Demoulding of finished parts Visual control of conformity and many others... 3 levels of automation possible o Operator assistance Insert loader o Partial automation Demoulding kit (front, rear top, rear bottom, etc.) o Total automation Robotic cell, brushing on horizontal presses, etc.

The HOTmatic HM 75 boasts an outstanding concept and is the ideal hotformer for the costefficient production of complex forgings with a diameter of up to 180 mm and an initial weight of up to 7.5 kg. Main advantages Integrated HFE functionality for forwards extruded forgings, Versatile machine kinematics for complex applications, Servohydraulic end stop system for optimal cutoff quality, Lowimpact part discharge reduces the need for remachining, High process reliability thanks to accurate transfer unit with individually monitored grippers

The HOTmatic HM 35 is the ideal hotformer for the costefficient production of precision forgings with a diameter of up to 75 mm, with a production rate of up to 170 parts per minute. Main advantages Highest productivity in this class, High process reliability, Controlled and lowimpact part discharge, Four forming stations for wide range of applications

The HOTmatic AMP 70 is the ideal hotformer for the costefficient production of forgings with a diameter of up to 165 mm, with a production rate of up to 80 parts per minute. Main advantages Wide range of uses, Intuitive operation, Triedandtested, efficient cooling system for maximum tool service life, High availability due to short retooling times, High material efficiency thanks to servoinfeed and electronic bar end elimination device (ESA 600)

The HOTmatic AMP 70 is the ideal hotformer for the costefficient production of forgings with a diameter of up to 165 mm, with a production rate of up to 80 parts per minute. Main advantages Wide range of uses, Intuitive operation, Triedandtested, efficient cooling system for maximum tool service life, High availability due to short retooling times, High material efficiency thanks to servoinfeed and electronic bar end elimination device (ESA 600)

The HOTmatic AMP 70 is the ideal hotformer for the costefficient production of forgings with a diameter of up to 165 mm, with a production rate of up to 80 parts per minute. Main advantages Wide range of uses, Intuitive operation, Triedandtested, efficient cooling system for maximum tool service life, High availability due to short retooling times, High material efficiency thanks to servoinfeed and electronic bar end elimination device (ESA 600)

The HOTmatic AMP 70 is the ideal hotformer for the costefficient production of forgings with a diameter of up to 165 mm, with a production rate of up to 80 parts per minute. Main advantages Wide range of uses, Intuitive operation, Triedandtested, efficient cooling system for maximum tool service life, High availability due to short retooling times, High material efficiency thanks to servoinfeed and electronic bar end elimination device (ESA 600)

The HOTmatic AMP 509 is the ideal hotformer for the costefficient production of forgings with a diameter of up to 108 mm, with a production rate of up to 100 parts per minute. Main advantages Wide range of uses, Intuitive operation, Triedandtested, efficient cooling system for maximum tool service life, High availability due to short retooling times, High material efficiency thanks to servoinfeed and electronic bar end elimination device (ESA 600)

The HOTmatic AMP 509 is the ideal hotformer for the costefficient production of forgings with a diameter of up to 108 mm, with a production rate of up to 100 parts per minute. Main advantages Wide range of uses, Intuitive operation, Triedandtested, efficient cooling system for maximum tool service life, High availability due to short retooling times, High material efficiency thanks to servoinfeed and electronic bar end elimination device (ESA 600)

The HOTmatic AMP 30 S is the ideal hotformer for mediumsized forgings with a diameter of up to 67 mm, with a production rate of up to 140 parts per minute. Main advantages Reliable and durable design, Wide range of uses, Smooth part discharge, High process reliability thanks to servoinfeed and electronic bar end elimination device (ESA 600), Power Failure Protection for high machine safety even during power failures

The HOTmatic AMP 20 S is the ideal hotformer for the costefficient production of high volumes of steel and brass parts with diameters of up to 38 or 42 mm, with a production rate of up to 200 parts per minute. Main advantages Compact design, Easy to operate, High productivity

The HOTmatic AMP 20 N is the ideal hotformer for the costefficient production of forged cam lobes and other challenging forgings with a diameter of up to 48 mm, with a production rate of up to 200 parts per minute. Main advantages High productivity, Lowimpact part discharge, Precise 4roller servoinfeed for challenging parts, Easy to operate

The COLDmatic CM 45eco is the ideal coldformer for accurate and complex parts from wire, with a production rate of up to 160 parts per minute. It boasts short commissioning times and has a compact design so it takes up less space. Main advantages Easy to operate, Separate lubricant and coolant circuit for maximum tool service life, Very high cutting quality, Accurate parts transport, Versatile kinematics, Optional equipment with heating system, Short commissioning times

The COLDmatic CM 725 is the ideal coldformer for accurate and complex parts from wire, with a production rate of up to 180 parts per minute. It boasts maximum cutoff quality and userfriendly servo technology in the infeed and transfer unit. Main advantages Short retooling times thanks to innovative servo technology, Easy to operate, Separate lubricant and coolant circuit for maximum tool service life, Very high cutoff quality, Accurate servo linear infeed without bar stop, for defectfree cutoff surfaces, Accurate servo transfer unit for safe part transport, Versatile kinematics, Optional equipment with heating system

Technicial Specifications: 1) Origin: Germany 2) Dimensions: 550x800x1850 mm 3) Press power: 175 tons 4) Weight: 375 gr 5) Motor power: 30 kW 6) Size of mold plates: 700x700 mm 7) Table size: 450x450 mm 8) Screw diameter: 80 mm 9) Screw stroke length: 1050 mm 10) Press type: Horizontal

Production of castings by the LAP method from aluminum, zinc and other low-melting alloys on machines with a cold horizontal pressing chamber with locking force from 250 to 420 t / s, weighing from 0.050 kg to 6.0 kg. Production of castings by casting into metal reusable molds (chill molds) of aluminum alloys, on chill machines with manual and hydraulic drive, the mass of castings from 0.050 kg to 6.0 kg.