Hooks and eyes - Import export

Closed hook Eye Bolts

Breathable, Seamless Three Hook-and-eye Wire Free Full Cup

Safely carries single cables Where single cables are to be routed in a group and supported firmly without the use of trunking, the Single Wire System SWS from PFLITSCH offers a better alternative to cable ties, clamps, hoses or hook and eye fastener tape. Your advantages: Bendable VA stainless steel rod for robust, flexible cable routing support Corrosion-resistant system Easy to clean, open cable routing Easy installation with VA stainless steel or plastic mounts SWS consists of bendable and yet robust 5 mm support rods with open routeing rings into which the cable is simply laid. Lines and hoses up to 16 mm can be safely accommodated – on straight sections or around corners. The support rods are attached with bolted-on plastic mounting plates or VA stainless steel mounts welded on to the machine body for example.

The coding for the accessories is as follows: The first two letters refer to the type and the subsequent numbers refer to the hoisting capacity in kg’s. A few letters then follow; these refer to the surface treatment of the product. The explanation for the coding is as follows: Type coding: KB = Pedestal AR = cable set AM = air motor Version coding: GR = grey (RAL 7035) / black (RAL 9005) painted according to DIN 12944-C1 EV = electrolyte zinc plated, min. 6 microns The Gebuwin pedestals are solidly manufactured and are specially developed for hand winch applications. The cable pulleys are manufactured from cast iron and the blocks from steel. The pedestals are supplied painted in grey/ black. The cable pulleys are fitted with a sliding bearing. The cable set is inclusive of an eye and hook and an end fitting. The coding is followed by the maximum hoisting load allowed, the cable diameter in mm and lastly by the cable length in metres. The worm gear winches as from 1000kg...

The coding for the accessories is as follows: The first two letters refer to the type and the subsequent numbers refer to the hoisting capacity in kg’s. A few letters then follow; these refer to the surface treatment of the product. The explanation for the coding is as follows: Type coding: KB = Pedestal AR = cable set AM = air motor Version coding: GR = grey (RAL 7035) / black (RAL 9005) painted according to DIN 12944-C1 EV = electrolyte zinc plated, min. 6 microns The Gebuwin pedestals are solidly manufactured and are specially developed for hand winch applications. The cable pulleys are manufactured from cast iron and the blocks from steel. The pedestals are supplied painted in grey/ black. The cable pulleys are fitted with a sliding bearing. The cable set is inclusive of an eye and hook and an end fitting. The coding is followed by the maximum hoisting load allowed, the cable diameter in mm and lastly by the cable length in metres. The worm gear winches as from 1000kg...

The coding for the accessories is as follows: The first two letters refer to the type and the subsequent numbers refer to the hoisting capacity in kg’s. A few letters then follow; these refer to the surface treatment of the product. The explanation for the coding is as follows: Type coding: KB = Pedestal AR = cable set AM = air motor Version coding: GR = grey (RAL 7035) / black (RAL 9005) painted according to DIN 12944-C1 EV = electrolyte zinc plated, min. 6 microns The Gebuwin pedestals are solidly manufactured and are specially developed for hand winch applications. The cable pulleys are manufactured from cast iron and the blocks from steel. The pedestals are supplied painted in grey/ black. The cable pulleys are fitted with a sliding bearing. The cable set is inclusive of an eye and hook and an end fitting. The coding is followed by the maximum hoisting load allowed, the cable diameter in mm and lastly by the cable length in metres. The worm gear winches as from 1000kg...

The coding for the accessories is as follows: The first two letters refer to the type and the subsequent numbers refer to the hoisting capacity in kg’s. A few letters then follow; these refer to the surface treatment of the product. The explanation for the coding is as follows: Type coding: KB = Pedestal AR = cable set AM = air motor Version coding: GR = grey (RAL 7035) / black (RAL 9005) painted according to DIN 12944-C1 EV = electrolyte zinc plated, min. 6 microns The Gebuwin pedestals are solidly manufactured and are specially developed for hand winch applications. The cable pulleys are manufactured from cast iron and the blocks from steel. The pedestals are supplied painted in grey/ black. The cable pulleys are fitted with a sliding bearing. The cable set is inclusive of an eye and hook and an end fitting. The coding is followed by the maximum hoisting load allowed, the cable diameter in mm and lastly by the cable length in metres. The worm gear winches as from 1000kg...

The coding for the accessories is as follows: The first two letters refer to the type and the subsequent numbers refer to the hoisting capacity in kg’s. A few letters then follow; these refer to the surface treatment of the product. The explanation for the coding is as follows: Type coding: KB = Pedestal AR = cable set AM = air motor Version coding: GR = grey (RAL 7035) / black (RAL 9005) painted according to DIN 12944-C1 EV = electrolyte zinc plated, min. 6 microns The Gebuwin pedestals are solidly manufactured and are specially developed for hand winch applications. The cable pulleys are manufactured from cast iron and the blocks from steel. The pedestals are supplied painted in grey/ black. The cable pulleys are fitted with a sliding bearing. The cable set is inclusive of an eye and hook and an end fitting. The coding is followed by the maximum hoisting load allowed, the cable diameter in mm and lastly by the cable length in metres. The worm gear winches as from 1000kg...

The coding for the accessories is as follows: The first two letters refer to the type and the subsequent numbers refer to the hoisting capacity in kg’s. A few letters then follow; these refer to the surface treatment of the product. The explanation for the coding is as follows: Type coding: KB = Pedestal AR = cable set AM = air motor Version coding: GR = grey (RAL 7035) / black (RAL 9005) painted according to DIN 12944-C1 EV = electrolyte zinc plated, min. 6 microns The Gebuwin pedestals are solidly manufactured and are specially developed for hand winch applications. The cable pulleys are manufactured from cast iron and the blocks from steel. The pedestals are supplied painted in grey/ black. The cable pulleys are fitted with a sliding bearing. The cable set is inclusive of an eye and hook and an end fitting. The coding is followed by the maximum hoisting load allowed, the cable diameter in mm and lastly by the cable length in metres. The worm gear winches as from 1000kg...

Introducing the KEDY K10100 Roll Mill Lifting Equipment, the perfect solution for your heavy-duty rolling mill operations. Designed with the latest technology and manufactured from high-strength materials, the K10100 is built to last and deliver outstanding performance. With its impressive load capacity, you can rest assured that your work roll will be safely and securely lifted and positioned every time. The K10100's size and shape are carefully crafted to fit your specific rolling mill design, ensuring a seamless integration into your operations. The surface finish of the K10100 is of the highest quality, providing durability and protection against corrosion and wear. Its connection points, such as hooks and lifting eyes, make it easy to attach and position your work roll, while its safety features, such as locking mechanisms and safety straps, ensure the safe and secure handling of your equipment.

total length 2.00 m, white, safe and quick installation by integrated turning feet, simple linkup by hook and eye system

Tow Eye Hook Cover Master 3

Track record in the utility sector is particularly strong. Manufacturing and supplying to the ESB for over 10 years. Donlouco are a trusted supplier of various components including: Steel forged parts, hook assembles, eye links, couplings.

Pull cords are used as actuators for operating pull rope emergency stop switches along conveyor belt systems. The pull cord and the accessories required for installation are functionally matched to the pull rope emergency stop switch, taking normative requirements into account. We therefore constantly carry out Pull cord, steel cable, 3mm or 5mm red PVC sheathed Various types of tension springs Anchor hook M10 Anchor hook M12 Anchor hook M8 Turnbuckle M6; 2 eyelets Turnbuckle M6; 1 hook / 1 eye Chain link 6 Eye bolt M12x60 * Eye bolt M12x200 * Eye bolt M12x60 * Clamp bracket, size. 3 5 Clamp egg shaped, size. 3 Clamp egg shaped, size. 5 Thimble Gr. 3 Thimble Gr. 5 Marking plate for rip cord Deflection pulley M10x60, pulley And much more