Hollow glass - Import export

Most compact actuator with high performance for automated positioning jobs Easy mounting, no additional coupling needed. Stainless steel 14 mm hollow shaft, glass fibre reinforced casing. Brushless 24 VDC motor with long service life. Solid absolute sensor, magnetic sensing technology. 2-line LCD for target and position value and operating keys. 2 LEDs for user guidance. Integrated RS485 or CANopen interface. Integrated positioning controller. M8 + M12 component mounting technology.

Fieldbus Profile AG05 Fieldbus: easy mounting, no additional coupling needed stainless steel 14 mm hollow shaft, glass fibre reinforced casing brushless 24 VDC motor with long service life solid absolute sensor, magnetic sensing technology 2-line LCD for target and position value and operating keys 2 LEDs for user guidance integrated RS485 or CANopen interface Integrated positioning controller M8 + M12 component mounting technology

Fieldbus Profile AG06 Fieldbus: easy mounting, no additional coupling needed stainless steel hollow shaft, glass fibre reinforced casing brushless 24 VDC motor with long service life solid absolute sensor, magnetic sensing technology 2-line LCD for target and position value and operating keys 2 LEDs for user guidance integrated RS485 or CANopen interface Integrated positioning controller M8 + M12 component mounting technology

Compact and powerful actuator for automated positioning jobs Easy mounting, no additional coupling needed. Stainless steel hollow shaft, glass fibre reinforced casing. Brushless 24 VDC motor with long service life. Solid absolute sensor, magnetic sensing technology. 2-line LCD for target and position value and operating keys. 2 LEDs for user guidance. Integrated RS485 or CANopen interface. Integrated positioning controller. M8 + M12 component mounting technology.

Lightweight premixed screed with compensated shrinkage, dry and controlled drying, based on hydraulic binders and hollow glass spheres, ideal for hand or machine formulation, even pressure pump, of lightened background screed. Apply directly to any internal and external surface as long as it is stable and not subjected to capillary ascent, non-fissure, non-detached is breathable and resistant to impact, suitable to receive the subsequent application of any flooring and membrane Waterproof and cementitious waterproofing; Suitable for the realization of screed in general both inside and outside, lightweight screed, insulating under tile, for slopes and roofs, floating scree on a resilient mattress for the acoustic insulation of noise from trampling.

Light-weight premixed structural concrete, standard UNI EN 206-1 with resistance class LC 20/22 type CLS 1.4; class LC 30/33 type CLS 1.6; class LC 40/44 type CLS 1.8 based on hydraulic binders and hollow spheres of glass, for indoor and outdoor use. To be applied by mechanical projection or by hand for lightened structural concretes in general. It does not corrode metals but protects them if wrapped completely. To be used for internal and external structural castings, for concrete in general with lightness and high resistance characteristics, for collaborative castings on slabs in Putrelle/Laterizio, laterocement, Wood. Type CLS 1.4 Available for quick drying type "R". FPC 0925 production process certificate.

Manual silvering of mirrored glass that achieves a light, non-deforming blurring effect. Made on flat, hollow, curved, cast, and glass objects. For interiors. Can be made either normal or antiqued.

Manual silvering of mirror glass that mimics the normal aging of the mirror over time. Performed on flat, hollow, curved, cast, and glass objects. For interiors. Antiquing intensity: light, medium, strong. Mirror effect: still or blurred.

Manual mirror silvering of flat, hollow, curved, cast, and glass objects. For interiors. We offer finished products and work on commission. Can be combined with other work such as decoration and sandblasting.

Static, Sintered PTFE Sheet Gaskets Characteristics Microcellular structured PTFE filled with hollow glass microspheres High sealability even at low gasket stress Minimized cold flow Very good recovery High compressibility and adaptability even at slightly damaged flanges Technical parameters Temperature: t = -180 … +230 °C Pressure: p = 55 bar Article code / Thickness BLUE 05 / 0.5 mm BLUE 08 / 0.8 mm BLUE 10 / 1.0 mm BLUE 15 / 1.5 mm BLUE 20 / 2.0 mm BLUE 30 / 3.0 mm Main application Steel-, Glass-, Ceramic-, glass lined or plastic flanges on pipework Vessel Container Reactors Universally on all tension sensitive equipment flanges. Suitable for Chemical industry Pharmaceutical industry Food industry Approvals DVGW TA Luft FDA EG 1935:2004, EU 10/2011 FDA Variant D3.1 Modified PTFE: Reduced deformation under pressure, better resilience under varying pressure, reduced thermal expansion coefficient (approx. 50 %) D3.2 Glas: Improved compression strength due to glas fiber...

These special hollow glass beads are made of a borosilicate glass. Their dimensions are very small and move in the lower millimeter range. The ends can be done open as well as closed.

3 sizes for marking of flat glass panes and Hollow glass bodies with logo's or lettering, max. 25,38 and 54 mm diameter! The device consists of in detail 1 tank made of sturdy steel plate, 6 liters. Contents, 3 feet, mounting bracket, lockable Fill cap for the blasting agent (corundum), and overpressure nozzle with filter element Needle felt (easy to replace). 1 special blasting gun with built-in injector nozzle, and venturi wide mouth – blasting nozzle and Compressed air connection nipples. 1 special distribution head for receiving the stencil, which are rapidly renewable, and the Recycling of the blasting agent in the container or in the filter element. 1 set = 4 pcs. Connecting hoses between blasting gun and containers or distribution head and the container.

The injector-glass-blasting cabin is operated by hand with a gun. A blast-collecting collector ensures a smooth blasting circuit within the system. With the help of roller rails, as well as through-slots (on the side and in the roof surface with special brushes against the penetration of dust), surface treatment of glass panes is easy. On the front side there is an easy-open loading door for radiating hollow glass bodies. A work grate and two shock-proof long-field lamps (for glare-free illumination of the blasting chamber) guarantee a smooth workflow. The foot switch as well as the drain cup on the blasting agent funnel, an attached control box with pressure reducing valve and pressure gauge, motor protection switch, on / off button, solenoid valve, control lights, switches for interior lighting, main switch, emergency stop switch and support control ensure uncomplicated operation.

The major and growing concern for the environment and the reduction of raw material consumption has led to the design of waste recycling plants with a high technological value and low environmental impact. Officine Conterno is able to manufacture complete plants for the recycling and exploitation of aggregates of various kinds such as: BUILDING DEMOLITION RUBBLE BRICK PROCESSING SCRAPS STEEL AND FOUNDRY SLAG UNBURNED ASHES FROM MSW INCINERATORS FLAT AND HOLLOW GLASS SCRAP After undergoing a crushing process, iron removal, screening and separation of non-ferrous metals, all these materials are placed back on the market and are used in building and industry.