Heating service - Import export

Sce at the service of refrigeration and heating offers order, efficiency, traceability of orders and rigorous controls as well as cutting-edge technology. Production planning is managed by an IT system which provides total control of the order. The company boasts a completely internal production process which allows the product to be followed and controlled in all its manufacturing phases; starting from the careful selection and purchase of the raw material, following with the processing, where technically trained internal staff arrive at the finished product. The packaging and micropercussion marking are carried out according to customer requests, each product is supplied with an identification label on the packaging and specific lot numbers and precise codes. We provide a transport service with our own trucks or by express courier.

We have all types of industrial heat exchangers, including: plate and frame shell and plate shell and tube fin/fan They’re refinery-grade, thoroughly cleaned, pressure tested and certified contaminant-free before each use. Capable of handling temperatures from -50ºC to +300ºC, they can also accept volatile gases and liquids, high pressures (up to 40 barg), hydrocarbons, sea water, effluent and brine. With a wide range of supporting ancillaries we can connect our heat exchanger units into any system design with minimum disruption. Heat exchanger hire with expert service support – every time Whether you’re facing emergency bottlenecks, turnarounds or seasonal cooling needs, our process engineers will work closely with you to find the best solution. They’ll visit your site, assess your needs, then design and size your project using their experience, simulation software and stream physical properties. We can also assess the performance of existing heat exchanger

Keep your projects on track and your operations running with our 350 kW diesel hire service. From heating a temporary venue, to drying out a building - our indirect diesel heater hire packages can help. The largest of the Aggreko heater fleet. Incorporates the latest heat controls and frequency slow-start. Can be switched down to a lesser heat output if required. High flow and low noise make for an excellent all-round heater. Provides good airflow over long distances. Suitable for commercial use and both indoor and outdoor applications. Ideal for either largescale or localised temporary heating. Can be run with an external thermostat to save on fuel. Can be used for HVAC applications, as well as industrial or construction applications - wherever warm air is required.

The compact 3RD4-EC dispenser from ViscoTec ensures an even and reliable product supply of viscous, structure-sensitive and solids-laden products. Absolutely precise, uniform and reliable dosing of various media, such as adhesive dosing or sealant dosing, thanks to the special rotor-stator geometry. Alternating opening chambers ensure gentle product transport and pulsation-free output. Your advantages: - interior non-stick coated - no dripping or thread pulling due to programmable retraction - direct linearity between spread rate and speed - constant dosing volume even with fluctuations in density, viscosity and temperature - reliable dosing without heating the medium - long service life due to media-specific component selection - easy cleaning and condition check of the pump interior - quick disassembly

The Customised manufacturing is performed in a 3000 sqm area. We offer a wide range of services: we construct and machine small, medium and large size components, from 10mm till 5200x3250x2700mm and we have a giant CMM to measure the big size: DEA ALPHA, Leitz X1 - 5000x2500x1800 mm. We have more than 30 machines in this facility (milling, CNC machining centres, grinding, lathes) and 2 Quality laboratories. We have a painting, welding and heat (surface) treatment services. The strength of this division is the design and manufacturing of fixtures and dedicated machines aiding manufacturing. We can imagine, create and produce fixtures and we can assembly and test, even if this is hydraulic or pneumatic. We can perform electrical work as well.

The Customised manufacturing is performed in a 3000 sqm area. We offer a wide range of services: we construct and machine small, medium and large size components, from 10mm till 5200x3250x2700mm. We have more than 30 machines in this facility (milling, CNC machining centres, grinding, lathes) and 2 Quality laboratories. We have a painting, welding and heat (surface) treatment services. Our CMM machines are: DEA ALPHA, Leitz X1 scan, 5000 x 2500 x 1800 – with this one we can measure the biggest components what we produce. We deliver the report online to our customers. LEITZ REFERENCE, Leitz X5 scan, D200 with rotating table, 1500 x 900 x 700; LEITZ REFERENCE, Leitz X5 scan, 1500 x 900 x 700. All these machines are avialable for rent.

At our company, we offer comprehensive heat treatment services for both steel and aluminum products. Our team consists of expert associates who are leaders in their respective fields, ensuring top-notch quality and precision in every project. Additionally, we provide valuable consultation to help you determine the best available options or optimize processes to achieve your desired results efficiently.

Ming Xiao Manufacturing Co Ltd is specialize in Plastic extrusion profiles,pipes, rods, rails, LED lampshade,Wiring trunking, Speaker body, Kinds of Shells and slides,we can produce plastic extrudsion products from materials of PVC, ABS, PP,PE,PC,PMMA, AS /PE... The extrusion molding service is to heat the plastic material and make it in the state of viscous flow. Under the action of pressure, the plastic mold is used to form a continuum that is similar to the shape of the die. Then the cooling is made to form a glass state, and the plastic products with a certain geometry and size are obtained by cutting. We provide a variety of extrusion process processing, cold extrusion, hot extrusion, two-color co-extrusion, three-color co-extrusion, soft and hard co-extrusion,can meet customer requirements of different products processing needs! If you need any plastic extrusion profiles,welcome send your drawings and samples to us for a quote.

Ming Xiao Manufacturing Co Ltd is specialize in Plastic extrusion profiles,pipes, rods, rails, LED lampshade,Wiring trunking, Speaker body, Kinds of Shells and slides,we can produce plastic extrudsion products from materials of PVC, ABS, PP,PE,PC,PMMA, AS /PE... The extrusion molding service is to heat the plastic material and make it in the state of viscous flow. Under the action of pressure, the plastic mold is used to form a continuum that is similar to the shape of the die. Then the cooling is made to form a glass state, and the plastic products with a certain geometry and size are obtained by cutting. The Plastic Extrusion profiles widely use for auto parts, light rail train fittings, lamps and lanterns, refrigeration industry, household electrical appliances, stationery, warehousing and other enterprises to provide quality support services. If you need any plastic extrusion profiles,welcome send your drawings and samples to us for a quote.

Ming Xiao Manufacturing Co Ltd is specialize in Plastic extrusion profiles,pipes, rods, rails, LED lampshade,Wiring trunking, Speaker body, Kinds of Shells and slides,we can produce plastic extrudsion products from materials of PVC, ABS, PP,PE,PC,PMMA, AS /PE... The extrusion molding service is to heat the plastic material and make it in the state of viscous flow. Under the action of pressure, the plastic mold is used to form a continuum that is similar to the shape of the die. Then the cooling is made to form a glass state, and the plastic products with a certain geometry and size are obtained by cutting. We provide a variety of extrusion process processing, cold extrusion, hot extrusion, two-color co-extrusion, three-color co-extrusion, soft and hard co-extrusion,can meet customer requirements of different products processing needs! If you need any plastic extrusion profiles,welcome send your drawings and samples to us for a quote.

Ming Xiao Manufacturing Co Ltd is specialize in Plastic extrusion profiles,pipes, rods, rails, LED lampshade,Wiring trunking, Speaker body, Kinds of Shells and slides,we can produce plastic extrudsion products from materials of PVC, ABS, PP,PE,PC,TPE/TPR, AS /PE... The extrusion molding service is to heat the plastic material and make it in the state of viscous flow. Under the action of pressure, the plastic mold is used to form a continuum that is similar to the shape of the die. Then the cooling is made to form a glass state, and the plastic products with a certain geometry and size are obtained by cutting. The Plastic Extrusion profiles widely use for auto parts, light rail train fittings, lamps and lanterns, refrigeration industry, household electrical appliances, stationery, warehousing and other enterprises to provide quality support services. If you need any plastic extrusion profiles,welcome send your drawings and samples to us for a quote.

Ming Xiao Manufacturing Co Ltd is specialize in Plastic ABS extrusion profiles, pipes, strips, rods, rails, LED lampshade,Wiring trunking, Speaker body, Kinds of Shells and slides, The extrusion molding service is to heat the plastic material and make it in the state of viscous flow. Under the action of pressure, the plastic mold is used to form a continuum that is similar to the shape of the die. Then the cooling is made to form a glass state, and the plastic products with a certain geometry and size are obtained by cutting. The Plastic Extrusion profiles widely use for auto parts, light rail train fittings, lamps and lanterns, refrigeration industry, household electrical appliances, stationery, warehousing and other enterprises to provide quality support services. If you need any ABS extrusion profiles,welcome send your drawings or samples to us for a quote.

Ming Xiao Manufacturing Co Ltd is specialize in Plastic extrusion profiles,pipes, rods, rails, LED lampshade,Wiring trunking, Speaker body, Kinds of Shells and slides,we can produce plastic extrudsion products from materials of PVC, ABS, PP,PE,PC,PMMA, AS /PE... The extrusion molding service is to heat the plastic material and make it in the state of viscous flow. Under the action of pressure, the plastic mold is used to form a continuum that is similar to the shape of the die. Then the cooling is made to form a glass state, and the plastic products with a certain geometry and size are obtained by cutting. We provide a variety of extrusion process processing, cold extrusion, hot extrusion,Embossing Extruding, two-color co-extrusion, three-color co-extrusion, soft and hard co-extrusion,can meet customer requirements of different products processing needs! If you need any plastic extrusion profiles,welcome send your drawings and samples to us for a quote.

Custom PVC Extrusion Pipes - 20 years of experience in Plastic extruding Services. Ming Xiao Manufacturing Co Ltd is specialize in Plastic extrusion pipes, rods, rails, LED lampshade,Wiring trunking, Speaker body, Kinds of Shells and slides from PVC resins. The extrusion molding service is to heat the plastic material and make it in the state of viscous flow. Under the action of pressure, the plastic mold is used to form a continuum that is similar to the shape of the die. Then the cooling is made to form a glass state, and the plastic products with a certain geometry and size are obtained by cutting. The Plastic Extrusion profiles widely use for auto parts, light rail train fittings, lamps and lanterns, refrigeration industry, household electrical appliances, stationery, warehousing and other enterprises to provide quality support services. If you need any plastic PVC extrusion pipes or complicates structured profiles,welcome send your drawings and samples to us for a quote.

Ming Xiao Manufacturing Co Ltd is specialize in Plastic extrusion profiles,pipes, rods, rails, LED lampshade,Wiring trunking, Speaker body, Kinds of Shells and slides,we can produce plastic extrudsion products from materials of PVC, ABS, PP,PE,PC,PMMA, AS /PE,TPE/TPR... The extrusion molding service is to heat the plastic material and make it in the state of viscous flow. Under the action of pressure, the plastic mold is used to form a continuum that is similar to the shape of the die. Then the cooling is made to form a glass state, and the plastic products with a certain geometry and size are obtained by cutting. The Plastic Extrusion profiles widely use for auto parts, light rail train fittings, lamps and lanterns, refrigeration industry, household electrical appliances, stationery, warehousing and other enterprises to provide quality support services. If you need any plastic extrusion profiles,welcome send your drawings and samples to us for a quote.

Custom Tansparent PC Pipes & PVC Profiles, High transparency, light transmittance up to 92%. Ming Xiao Manufacturing Co Ltd is specialize in Plastic extrusion pipes, rods, rails, LED lampshade,Wiring trunking, Speaker body, Kinds of Shells and slides from PVC resins. The extrusion molding service is to heat the plastic material and make it in the state of viscous flow. Under the action of pressure, the plastic mold is used to form a continuum that is similar to the shape of the die. Then the cooling is made to form a glass state, and the plastic products with a certain geometry and size are obtained by cutting. The Plastic Extrusion profiles widely use for auto parts, light rail train fittings, lamps and lanterns, refrigeration industry, household electrical appliances, stationery, warehousing and other enterprises to provide quality support services. If you need any plastic PC extrusion pipes or profiles,welcome send your drawings and samples to us for a quote.

Custom Tansparent PVC Pipes & PVC Profiles, transparency is customizable. Ming Xiao Manufacturing Co Ltd is specialize in Plastic extrusion pipes, rods, rails, LED lampshade,Wiring trunking, Speaker body, Kinds of Shells and slides from PVC resins. The extrusion molding service is to heat the plastic material and make it in the state of viscous flow. Under the action of pressure, the plastic mold is used to form a continuum that is similar to the shape of the die. Then the cooling is made to form a glass state, and the plastic products with a certain geometry and size are obtained by cutting. The Plastic Extrusion profiles widely use for auto parts, light rail train fittings, lamps and lanterns, refrigeration industry, household electrical appliances, stationery, warehousing and other enterprises to provide quality support services. If you need any plastic PVC extrusion pipes or complicates structured profiles,welcome send your drawings and samples to us for a quote.

Galvanised steel pipes, which are resistant to and all kinds of wear such as corrosion etc. compared to black pipes, are manufactured as pre-insulated to prevent heat loss when used in service water installations, fire hydrant lines and boiler lines.

Base Group specializes in the manufacturing of products for heating, ventilation and air conditioning (HVAC). We have been providing services in the heating, ventilation and air-conditioning sector for many years. We are manufacturer of heating structures, ventilation structures and air conditioning industry structures upon the earlier consultation with customers concerning their requirements.

For everything from pipeline valves to 10,000L agro-chemical containers. LMK Thermosafe Ltd manufacture a wide range of drum and container heating products used in process industries world-wide, including Flexible Heating Jackets in a variety of sizes, materials, power levels and voltages. Custom size Flexible Heating Jacket The Flexible Heating Jackets are so versatile that they can be specifically tailored to fit a multitude of different containers suitable for virtually any size and specifications. This bespoke service offers ideal solutions for customers requiring non-standard containers to be heated as rapidly as possible and efficiently insulated. However big or small the application, our development team based at our UK headquarters can adapt tried and tested designs to produce the best results. A wide standard range is also available from stock to fit 25, 50, 100 or 205 litre drums as well as 1000 litre IBC containers, totes and gas cylinder applications.

PRODUCT NAME: GP Composite Heat Insulated Pizza Service Case COLOR OPTIONS: Red - Black - White COMPATIBLE BRAND: UNIVERSAL COMPATIBLE MODEL AND YEAR: Universal DIMENSIONS: Outer Width: 62cm Width: 42cm Internal Measurement: 51x33x27 Height: 34cm EXPLANATION: It is resistant to impacts and vibration. The cover part has a shock absorber. It has a lock mechanism. It is insulated against hot and cold. It is plastic material. It is filled with polyurethane.

Ball valve intended for Sulphur or bitumen service – the heating maintains the fluid liquid to operate the valve. Suitable for all fluids and substances that are solid at ambient temperature and it is necessary to warm them up continuously. This valve has a double shell. • DN 10 – DN 200 • PN 16 – PN 250 • NPS ½″ – NPS 8″ • Class 150 – Class 1500

Our corrugated tubing systems for use in renewable energies enable increased efficiency thanks to an increased surface area resulting from the corrugated design. In addition, they withstand high mechanical loads, also internal pressure loads, and are highly flexible. Individually adapted cuffs that match commercially available fittings and welded cuffs allow for easy installation and reduce assembly time. The solar hose made by FRÄNKISCHE INDUSTRIAL PIPES is ideal for solar water heating (from 24°C to 30°C). The hose is made of high-quality PE and is durably resistant against saltwater, chlorine, UV radiation and therefore best suited for solar service water heating. Due to pre-molded couplings, it can be split individually and even installed in already existing filter cycles.

The EMA 200 is a portable, battery-powered digital pressure gauge for precise measurement of positive and negative differential pressures. Because it is easy-to-use, the EMA 200 lends itself well to maintenance work and customer service applications for heating, air-conditioning and ventilation units, where it can be used for monitoring filters and measuring fireplace drafts as well as measuring flow rates and determining volumetric flows. The instrument is available with an ISO factory calibration or DAkkS calibration certificate.

The EMA 84 is a portable, battery-powered digital pressure gauge providing highly accurate measurements of positive and negative differential pressures. Because it is durable and easy-to-use, the EMA 84 lends itself well to maintenance work and customer service applications for heating, air-conditioning and ventilation units, where it can be used for monitoring filters, measuring fireplace drafts, etc. Its precision and reproducibility also make the EMA 84 is highly suitable for use in laboratory applications.

Introducing Caldor's Cartridge Heaters, the ultimate high-performance heating solution designed for a wide range of industrial applications. Our cartridge heaters deliver exceptional heat transfer, uniform temperatures, and long-lasting durability to meet the most demanding process requirements. Built with top-quality materials, Caldor's Cartridge Heaters feature a robust construction and high watt density, ensuring rapid heat-up times and excellent heat distribution. The innovative swaged design ensures superior heat transfer, while the built-in thermocouple ensures precise temperature control for consistent results. Key Features: Customizable dimensions to fit various applications Temperature range: up to 1400°F (760°C) Wattage: up to 200 watts per square inch Superior heat transfer and uniformity Long service life and reliable performance Easy installation and maintenance

- initial external visual inspection to identify the elements correctly - tracing the history of the heat exchanger(s) - pressure test, also called hydrostatic test - removal of the headers to facilitate the inspection of the internal surfaces - report with a suggestion of solutions

Spares, TIR (test, inspection, and report) replacement, upgrades, repairs, refurbishment, offshore surveys, and maintenance services of existing heat exchangers

We are certified Manufacturer of wood pellets according to the ENplus® A1 Standard. When buying chopped Wood pellets & firewood, you get high-quality and eco-friendly products, which provide high heating emission (due to drying of moisture of 8-12%), do not smoke, do not pollute the environment and prolong the service life of heating plants. Diameter: 6 mm Energy content: about 4,9 кВтг/кг Moisture: 8-10% Ash content: ≤ 0,7% Raw material: 100% wood Gross CV (d): 4977 kcal/kg Certificates: ENplus A1 The price for chopped firewood and pellets which meet the quality standards is based on the cost for fuel production without hidden charges. Cost-effective delivery to partners Delivery in Germany and anywhere in Europe is carried out by our partners — carrier companies, which offer several delivery options Certified production The fuel pellets production lines are equipped with modern domestic systems, certified by European standard