Heating panels - Import export

It gives gentle heat without drying the air and burning the oxygen (the surface temperature does not exceed 85 ° C) It consumes 3-4 times less electricity than regular heaters (consumption – 400 W) It ia safe

Thickness : 2,5 - 3,5 mm Width : 1100 mm Effective Width : 1025 mm Purlin spacing : 500 mm Lengths : 2-8 meters

Because of the complexity of controlling both parameters, every project is designed according to dimensions, material of the case, target values as well as ambient extremes in temperature and humidity. Although we do not have standard, off shelf units we are offering: Maxi T – Large units to control temperature and humidity inside the medium size cases (5-10 cubic meters) where main generator is located inside the machine room or other technical area some distance from the display case. See below. Mini T – small, compressor based unit for installation under or behind the display case. This unit can work with venting type or cooling/heating panels system. Will work with our Mini One or sometimes PMCG units. Special, thermoelectric device for very small cases. Will work with our PMCG unit. Please note that controlling temperature and humidity requires some changes to display case design and its very hard if not impossible

INFRARED HEATING PANEL TIH 700 SFlexibly usable flat heating panel for wall drying, effective spot heating or as a decorative heating element We strongly recommend using the infrared heating panel TIH 700 S when conventional air heaters have reached their limits for process-related reasons, when rooms without a heating are to be equipped with an effective heat source without costly modifications, or when you want to provide additional cosy warmth in your own four walls in a targeted and cost-effective manner. For while classical heating devices work with convection heat, which means that they use the ambient air as heat transfer medium, heat it up and distribute it in the room, the heating panel TIH 700 S generates direct heat by means of infrared radiation without convective loss and thus works on the same principle as the sun. This functional principle provides manifold possibilities of use for the infrared heating panel TIH 700 S:

INFRARED HEATING PANEL TIH 500 SFlexibly usable flat heating panel for wall drying, effective spot heating or as a decorative heating element We strongly recommend using the infrared heating panel TIH 500 S when conventional air heaters have reached their limits for process-related reasons, when rooms without a heating are to be equipped with an effective heat source without costly modifications, or when you want to provide additional cosy warmth in your own four walls in a targeted and cost-effective manner. For while classical heating devices work with convection heat, which means that they use the ambient air as heat transfer medium, heat it up and distribute it in the room, the heating panel TIH 500 S generates direct heat by means of infrared radiation without convective loss and thus works on the same principle as the sun. This functional principle provides manifold possibilities of use for the infrared heating panel TIH 500 S:

Efficient heating procedure with environmentally friendly IR-C radiationBranded heating panel of the size 605 x 505 mm with a power of 300 W The elegant infrared flat heating panel TIH 300 S generates a cosy and clean warmth – without noises, smells, condensate or the unpleasant circulation of dust. Like the sun the branded heating panel generates direct heat by means of infrared radiation, which does not heat the ambient air, but rather all the items in the room (besides persons also walls, ceiling, floor and furniture) which then gradually emit the stored heat into the room.

The infrared heating panel TIH 900 S supplied in TÜV-tested quality comes with all the references to be expected of a branded heating panel. This includes i.a. the efficient heating procedure with environmentally sound IR-C radiation, where 100 % of the electrical energy input is converted into heat output. Moreover, the TIH 900 S generates a cosy and clean warmth – without noises, smells, condensate or the unpleasant circulation of dust. For like the sun the heating panel generates direct heat by means of infrared radiation, which does not heat the ambient air, but rather all the items in the room (besides persons also walls, ceiling, floor and furniture) which then gradually emit the stored heat into the room.

The infrared heating panel TIH 1100 S is part of our elite task force, for it always leaves a good impression under the most diverse of operating conditions. Regardless of whether it is intended to be used for additional selective heating in the living area, as sole heat source in rooms so far without a heating system such as the hobby room in the basement, or for commercial use, e.g. in the catering trade, at cool workplaces in the storage room or even in the area of construction drying and renovation. On the one hand, this is down to the completely uncomplicated application of the heating panel, which requires nothing more than a power outlet for its heating operation. On the other hand, it is due to the comforting warmth generated by the infrared heating.

Unfailingly the flexible and effective infrared heating panel TIH 400 S impresses with cosy warmth in every conceivable application scenario. Whether it is intended to be used for additional selective heating in the living area, as sole heat source in rooms so far without a heating system such as the hobby room in the basement, or for commercial use, e.g. in the catering trade, at cool workplaces in the storage room or even in the area of construction drying and renovation. For its heating operation the versatile flat heating panel requires nothing more than a power outlet, it is perfectly easy to handle and supplies clean heat – without noises, smells, condensate or the unpleasant circulation of dust. For like the sun the TIH 400 S heating panel generates direct heat by means of infrared radiation, which does not heat the ambient air, but rather all the items in the room (besides persons also walls, ceiling, floor and furniture) which then gradually emit the stored heat into the room

Embro is a German manufacturer of textile-based heating elements and pads. The elements are highly flexible, lightweight, and they are ideal for all kinds of mobile heating solutions such as: > car seat heaters > steering wheel heaters > heating elements for garments (jackets, gloves, ...) Furthermore, our elements are often used in infrared heating panels, too. Do not hesitate to contact us for further information.

Stainless steel digester with a digester chamber volume of 200 to 5000 m3 External panel heating and insulation Optimised diameter to height ratio for optimum mixing and minimal stirring Flexible stirring technology which can be adapted to the substrate and digester Stirring technology can be maintained without having to empty the tank

Acoustic felt fabrics, Selfadhesive acoustic felt fabric mounted on the back surfaces of wood acoustic panels, heated to the rear surfaces of ceiling, wall and floor panes, providing sound insulation and sound acoustics. Acoustic felt fabrics have excellent sound absorption values. It is a professional acoustic covering material used in the construction of acoustic panels. They are produced in rolls. As Aksa Acoustic Sound Insulation & Coating Materials Company we are producing all kind of acoustic products. All about acoustic felt products and acoustic arrangement

WITH DIGESTER CHAMBER VOLUMES RANGING FROM 200 M3 TO 5.000 M3 The LIPP Universal digester which unlike the KomBio reactor does not have an integrated gas accumulator, is used for larger plants for industry and municipalities. The biogas accumulated is either directed into a KomBio reactor combined with the Universal digester or into a separate gas accumulator. KEY BENEFITS Production of renewable energy and reduction of fossil CO2 emissions Low noise emissions Flexible substrate composition Customisable pumping and stirring technology High functional safety Effective insulation results in low heating requirement Quick construction thanks to on site production Low investment costs Low maintenance and durable Consistent quality worldwide PRODUCT SPECIFICATION MODULAR PLANT CONCEPT The LIPP Universal digester essentially consists of a (Verinox) stainless steel tank with a modular design. Panel heating and insulation are fitted on the outside and are easily accessible.

Stainless steel digester with a digester chamber volume of 100 to 2500 m3 Integrated gas accumulator – fixed in gutter for high operating safety Optimised diameter to height ratio for optimum mixing and minimal stirring Low maintenance, external panel heating system Flexible stirring technology which can be adapted to the substrate and digester Stirring technology can be maintained without having to empty the tank

Thanks to the Double Seam System, LIPP digesters have smooth internal walls (largely without any internal attachments) and ensure uniform mixing while keeping energy consumption low. The external panel heating guarantees uniform temperature distribution in the digester. These thermodynamic and mechanical benefits with LIPP digesters also mean that short retention times are achieved. The high functional safety, especially in respect of heating and stirring technology, promotes a low demand for process energy. Further benefits include minimal maintenance requirements and a long service life.

Triangular Acoustic Wood Wool is a sound insulation material that has gained a decorative appearance by mixing cement and poplar wood fibers. Triangular acoustic wood wool panels serve as heat shields and protect against fire during possible fire. As a result of the tests and tests made according to national and international standards, it is determined that the cementitious wood wool insulation board is not flameresistant and that if it is forced, it is burned by ash so as to form smoke with minimum flame effect, does not form flaming drips, does not flowCelenit acoustic wood wool panels; decorative material used in acoustic sound insulation applications, sound insulation works on walls and ceilings. It is also preferred in acoustic environments such as meeting rooms, call centers, conference rooms, and even in mechanical environments. Triangular Acoustic Wood Panel can be used in offices, meeting rooms and other places to improve the quality of the business environment.

mobile structure on metal stands available in 16 colors minimalist design adapting the office to different work scenarios eco-friendly material made of recycled plastic bottles

Acoustic sponge adhesive is an auxiliary application product suitable for use not only for sound insulation but also in many areas. Sectors in which it is used; Materials used in the furniture industry, office furniture, industry, packaging, automotive, insulation industry (sponge, felt, fabric, sound and heat insulation panels, on all surfaces, both hard and soft). Appearance: Liquid Color: Transparent / Red Viscosity: 450 +/- 50 mPas (25°C) Open Time: 20 seconds - 15 Minutes (Varies Depending on Ambient Temperature) Packaging: 3Kg - 15Kg - 225Kg Storage: It can be stored for 1 year in its unopened original packaging at 20°C. Boiling Point: 40 °C Water solubility: Not miscible Solid content: 40.0% Solvent content: 60.0% Density (20 oC): 1.18 g / cm3 Odour: characteristic

The electric heating with infrared radiant panels of wave laga are a clean solution, without noise, without emission of light, economic and very comfortable to use n its design and manufacture, the utmost attention has been paid to obtain an aesthetic and effective equipment. The heat radiated from the panel surface is absorbed by people, walls, floors and furniture. Infrared heating does not cause air movement, which will make the air clean and no noise is emitted. Its high heat generation and excellent distribution allow the equipment to be used with less energy than other traditional heating methods. Radiant heat is very good for people′s health, it can change the body′s microcirculation, the cellular organization under the skin produces resonance, cleanses the microcirculation barrier, adjusts and balances the nervous system, promotes metabolism and increases physical power of the body.

Plinth Infrared Heaters feature stylish design, they are slim, but you’ll be surprised by the amount of warmth they can generate! Designed to be mounted at the bottom of the wall, just above the floor, which makes them barely visible. Made of powder-coated sheet metal, it has a very lightweight (2kg) and very slim design (15 mm thick). If you need more heat in the room, multiple plinth heating panels can be connected in a parallel chain (up to 15 heaters in one chain). For this purpose, a terminal block is provided on the rear side of the heater. Key Advantages include: don’t burn oxygen, have zero maintenance fee, save up to 40% energy compared to other models, quickly warms up surrounding objects, silent during operation, don't blow dust, pollen, or other allergens. Effective heating area is 3-5 m².

QSun-W 660W is easy to install on a wall or any other vertical surface using only 4 screws. Effective heating area - 10-18 m² depending on the heat insulation of the room. Customize your QSun-W panel with a graphic design of your choice. Wall mounted infrared heating panels QSun-W are proven to have one of the highest efficiency rates reducing heating costs. Clean Dust Free Heat - unlike forced-air systems, infrared heating panels don't blow dust, pollen, hair, or other allergens. We recommend installing the QSun-W on the walls in places where there are no obstacles to the spread of infrared heating rays (tables, chairs, etc.) at a height of at least 100 mm from the floor. It is recommended to install this heater under the window. In this case, it will also perform the function of a "heat curtain" and prevent the penetration of cold air through the window into the room.

QSun-WA 610W is equipped with a control unit that allows you to set the desired temperature. It is easy to install on a wall or any other vertical surface using only 4 screws. Effective heating area - 10-18 m² depending on the heat insulation of the room. Customize your QSun-W panel with a graphic design of your choice. Wall mounted infrared heating panels Qsun-WA are proven to have one of the highest efficiency rates reducing heating costs. Clean Dust Free Heat - unlike forced-air systems, infrared heating panels don't blow dust, pollen, hair, or other allergens. We recommend installing the QSun-WA on the walls in places where there are no obstacles to the spread of infrared heating rays (tables, chairs, etc.) at a height of at least 100 mm from the floor. It is recommended to install this heater under the window. In this case, it will also perform the function of a "heat curtain" and prevent the penetration of cold air through the window into the room.

All EUROLINIA infrared panels are manufactured according to the client’s application and include high precision control systems to perfectly match the required production process. They feature extremely high reliability and durability, resistant to corrosion, high humidity, and condensation; dust, pollution, and most chemical compounds resistant. Infrared panel is usually divided into several operating zones. The heating intensity of each zone is automatically adjusted based on the data received from the thermal sensors located inside the ceramic emitters equipped with a thermocouple. This ensures compensation of heat losses at the edges of the product and helps to avoid overheating in the center. All infrared panels are assembled at our facility from scratch to the final product. We run multiple tests to make sure they are 100% in line with all the requirements and expectations. Our clients are welcome to attend such tests.

Locked system floor sandwich panels are used as chrome or plywood on the floors of cold stores to prevent heat losses. Lock Sandwich panels are doublejointed and also are connected by a lock. In this way easy assembly and excellent insulation will be provided. Join 1. Elastic lock system 2. Mastic application channel 3. Surface sheet end point 4. Surface sheet Online Support Video technical support Online support

QSun-C Ceiling Mounted Infrared Heater is adapted for installation to the "ARMSTRONG" type suspended ceiling grid or can be mounted at any height above the floor level using the included mounts. QSun-C saves your room space and electricity costs by delivering sun-like warmth directly to the people without heating the surrounding air, and not disturbing dust. Only 15 mm thick ceiling heating panels look elegant and aesthetically pleasing, seamlessly blending into any interior. Effective heating area - 8-12 m².

Ceramic Force EIP-1 (380V) infrared heaters for industrial use are designed for indoor and outdoor heating applications to deliver maximum performance and cover large spaces. They do an excellent job at factories, warehouses, workshops, stadiums, big garages and pavilions. 3 models are available with wattages: 3900, 4800 and 6000W. This power is enough to cover 20-60m2 depending on thermal insulation and surrounding temperature. Parabolic arrangement of infrared emitter rows allows you to create a heating zone with a volumetric 55-95 degrees angle. Thus, minimizing energy losses from heat dissipation outside the zone of directed infrared rays. EIP Heating panels can be mounted on a wall or a ceiling. Radiating surface angle can be set from 0 to 60 degrees. Each electric heater has a thermal sensor connected to a three-phase electric power thermostat, which controls the heating process according to the preset temperature.

Ceramic Force EIP-2 (380V) infrared heaters for industrial use are designed for indoor and outdoor heating applications to deliver maximum performance and cover large spaces. They do an excellent job at factories, warehouses, workshops, stadiums, big garages and pavilions. 3 models are available with wattages: 5850, 7200 and 9000W. This power is enough to cover 40-100m2 depending on thermal insulation and surrounding temperature. Parabolic arrangement of infrared emitter rows allows you to create a heating zone with a volumetric 55-95 degrees angle. Thus, minimizing energy losses from heat dissipation outside the zone of directed infrared rays. EIP Heating panels can be mounted on a wall or a ceiling. Radiating surface angle can be set from 0 to 60 degrees. Each electric heater has a thermal sensor connected to a three-phase electric power thermostat, which controls the heating process according to the preset temperature.

Popcorn machine whit printed graphics that will catch the eye of passing customers and draw them in for a delicious snack. - Popcorn machine features aluminum food-zones for easy cleaning, - Heated warming deck, - Tempered glass panels and lights