Heat-setting - Import export

The stenter is the heart of textile finishing. It develops more and more into a multipurpose line for the production of technical textiles and other webshaped materials. Several thousands of BRÜCKNER stenters are in use all around the globe. Every day they are stentering, drying, heatsetting, functionalizing and coating incountable meters of the most different fabric types. Since many decades BRÜCKNER stenters stand for highest quality and performance and are producing sustainably and energyefficiently. The most important benefits of these stenter frames are highest drying performance and process control matching any type of fabric due to the technically mature and proven splitflow air circulation system, very homogeneous air flow and temperature distribution due to alternately arranged thermo zones, very low specific energy consumption, extremely robust chains, chain rails, pin bar carriers and clips, needing only little maintenance.

OIL HEATER FAN IDE 80Our most powerful indirect oil heating fan IDE 80 is our recommendation for construction sites, halls, agriculture and workshops! So much hot air for so little money — this is the successful concept of the IDE series which also applies to its currently largest member. The oil heater fan IDE 80 has a heating capacity of 80 kW setting new standards for its own class as well as for heating at construction sites, in workshops and halls as well as in agriculture. The optional flue gas discharge allows flexible use of the indirect-fired oil heater fan IDE 80 for heating enclosed spaces. The IDE 80 is then fired with diesel or fuel oil. Continuous fuel supply to the stainless steel combustion chamber is regulated by means of a high-quality Danfoss injection pump. Among the further assets are the easily accessible, external fuel filter as well as the possibility to easily read the remaining fuel volume at the filling level indication integrated in the tank.

TEXTALU® E is a thin wall glass fibre braid made of glass fibres with heat-reflecting aluminium coating. Its reflecting surface guarantees that the protective sleeve made of this high-performance material maintains a nearly constant interior temperature even under strongly fluctuating ambient temperatures. This non-ductile braid sleeve is ideal for protecting lines, cables and cable sets against radiation heat.

The induction generator module is designed to supply up to 6 induction coils (inductors) with a power of up to 3 kW each. The device operates on the three-phase mains with a voltage of up to 400 V and a frequency of 50/60 Hz. The mains current is rectified and fed to the DC link, from which the inductors are individually supplied. The output power is controlled via the Kendrion controller of the modular industrial heating system. The setting range from 0% to 100% can be selected individually for each channel. By using state-of-the-art semiconductor switches, the output stages achieve high efficiencies, at working frequencies up to 25 kHz.

What is a Hot Asphalt Storage Silo? A hot asphalt storage silo is a specially designed structure used in the construction and road-paving industries to store hot asphalt mixtures prior to their application in various projects. These are parts of the asphaltic plants and paving operation; these are designed in such a way that stored asphalt should remain at a proper temperature to maintain workability features of asphalt up to the laying point. These silos provide a controlled environment that avoids cooling or solidifying too early in the asphalt, very essential to its usability during transportation and application. Primary function: These hot asphalt storage silos hold asphalt at a temperature of application on road surfaces and other infrastructure projects. Hot Asphalt Storage Silos are generally in the form of steel construction, insulated to retain heat. This setting makes the asphalt mix hot and ready for instant use in any construction process

A high-tech, high performance fountain solutionis formulated as revolut ionary for today’s generation of high-speed and high pagination heat-set web presses with alt type of dampening system. it reduces alcohol consumption step by step towards 0%. PROPERTIES NOVA ALCOFREE HS reduces step by step and eliminates alcohol Constant printing quality without alcohol(non v.o.c.) Excellent ink/water balance gives to printers wide latitude Perfect over emulsificat io n resistance eli minatesink feedbacks on the rollers Quick start up reducesdown time and waste Buffer system keeps the Ph value optimum (4, 8-5,2) for high quality printing Anti pilling agents reduce blanket cleaning stops andincrease the production output Keeps clean the dosage system and circuit with effective washing agents and biocides Prevents corrosion on the metal parts of the machine and plates. It is not harmfull for plastic parts of the machine It has been formulated to meet the requirements of the latest ctptechnology

Automotive and Industrial – Suction/Vacuum hoses, Radiator hoses, Air & Water hoses. We supply EPDM hoses in a wide range of standard and customized shapes and sizes, with different fabric reinforced options. We also have EPDM corrugated (convoluted) hoses, for air-cleaner applications in Automotive Filters. These hoses have a higher than usual bend radius, for trickier connections, and high ‘vibration’ and ‘vacuum pressure’ resistance. The continuous service temperature of EPDM hoses is -30C to +120 degrees C maximum, with peak temperatures of 150 to 160 degrees C We also supply EPDM-Peroxide cured hoses, where exceptional compression set and heat resistance is needed.

Our factory produce and supply shoelace waxing machine with waxing technical support. At present more and more luxury garments need high quality laces or cords accessories etc. While the common laces or cords don’t suit for the luxury garments’ standard, so need to develop new type lace or cords to meet the luxury garments’ requirement. The shoelace waxing machine is the one machine used to produce high quality lace and cords to meet the luxury garments’ requirements. Shoelace Waxing Machine Specification: Model: DR-25 Production: 6-10M/MIN Motor: 1Hp4ph 0.2KW 4P 1/30 Heater: 2.4KW Power consumption:17A Machine size: 2510*850*1785MM Shoelace Waxing Machine Features: 1.Temperature control of the automatic electric heat.:But through setting up the automatically controlled electric heat of temperature, in order to prevent the overheated causing machine platform or shoelace from being damaged. 2.Waxing new typely.

Residence (Domestic) Ultrasonic Heat Meters / 0-350°C Rotatable head and easy to read data / LCD display with light / Strong Plastic materials body / DN15 ~ DN40 dimensions / Support CJ188 communication protocol / Support optica, RS485 and M-Bus interface / Hermetically sealed register (IP67) / Instalation Horizontal or Vertical / Temperature 4 ~ 150°C / 3,6V lithium, Min 6 years battery life / 2 years of warranty ** Certifacates: •2014/32/EU - MID MI-001 Water Meter •EU Type Examination Certificate •Module D- EU Verification Certificate •ISO 4064:2015 / EN14154-1:2005, OIML R 49:2006 •ISO 9001:2015 / ISO 14001:2015 *** For the variety of implementation conditions appropriate threaded connection (heat meter fittings) which is given with heat meters as a set.

GK40C Continuous Stenter is designed to make Chemical and impregnation application on Fabric samples in laboatories with bulk production conditions. Thermasoling, Fixation, Drying, Heat setting or any similar application can made on 35cm fabrics. Can be designed according to customers demand like Continuous Stenter with Chain, lamination Line, Pad Thermasol line, Pad Dry-Pad Steam line and/or special application Curing line.

Description A new hairdryer with ergonomic design, the size of a mobile phone and designed to ensure controllable drying thanks to the concentrator nozzle. It achieves a desired healthy and natural finish with its 1000W it maximizes performance. It’s worth tryingit! Technical Features • Power supply: 220-240V 50/60Hz • Optimal 1000W power for gentle but powerful drying • Long-life DC motor • Optimum heat distribution • Two speeds setting • 1.8m power cord • Easy storage with hang loop design Components of the Package • 1 Mini hair dryer • 1 Concentrator • 1 Use instruction: EN, DE, FR, IT, ES, PT

Warming device, designed for blood, intravenous fluids and irrigation fluids to prevent and treat hypothermia and pre-, intra- and postoperative negative aftereffects. Suitable for emergency rooms, operating theaters, intensive care units, and other wards. • Can be delivered with 1 or 2 external heat exchangers. With 2 heat exchangers, you get the more versatile device, which allows a simultaneous transfusion/infusion to 2 patients. 2 independent control boards allow you to make transfusions/infusions with different temperatures. • Maintenance of the set temperature between 34 °С and 42 °С with 0.1 °С increments • Ensuring proper and effective infusion and transfusion therapy • Performance of the infusion therapy at a low flow rate • Warming nutrient solutions through nasal and enteral tubes • Quick start-up: heating to a set temperature in less than 2 min • Economic: average power consumption - approx. 40 W/h • Duralumin heating plate of the heat exchangers

Portable AMPIRMini is a warmer, designed for blood, intravenous fluids and irrigation fluids to prevent and treat hypothermia and pre-, intra- and postoperative negative aftereffects. The equipment is suitable for operating rooms, ICU, emergency departments, infusion rooms, dialysis rooms, hematology departments, neonatal departments, wards, etc., as well as ground and air transportation. • Operation from a built-in battery (up to 3 hours) or a car 12V socket • 24Н continuous operation, if connected to the power socket • Maintenance of the set temperature between 34 °С and 42 °С • Flexible adjustment of the temperature with 0.1 °С increments • Simultaneous usage of 2 infusion lines of different diameters • Ensuring proper and effective infusion and transfusion therapy • Performance of the infusion therapy at a low flow rate • Warming nutrient solutions through nasal and enteral tubes • Quick start-up: heating to a set temperature in less than 2 min • Duralumin heating plate

The secondary heating system is an integral part of the ContiRoll® and one of the decisive factors for its optimal functioning. For a perfectly dimensioned secondary heating system signicantly contributes to its eciency. The oil is heated in the boiler house to the temperature required and delivered to the primary circuit. The secondary heating station maintains the temperature in the secondary circuit to the press at set temperature by mixing the oil returning from the press that has already cooled down with the hotter oil of the primary circuit. The thermal oil transfers its thermal energy via hot platens, roller rods, steel belts to the mat to be pressed. Features Advancing temperature of the primary circuit is 280 °C Quick-acting aps for immediate re protection Heating circuits for setting the temperature distribution required by the respective process over the entire press length

Efficient, rugged, and flexible – eldec CUSTOM LINE MF generators offer state-of-the-art medium-frequency technology perfectly matched to your requirements. Their MF power ranges from 200 to 1,500 kW. The frequency range is 8 to 40 kHz. Induction heating with a comprehensive set of options Customized energy sources are the key for effective induction heating or hardening of parts. A made-to-measure solution ensures stable production processes and low energy consumption. CUSTOM LINE MF medium-frequency generators by eldec provide exactly these kinds of qualities. The configuration options are virtually unlimited. In addition to a wide range of power and frequencies, users have the choice between solutions with single and multiple outputs. As a result, several inductors can be connected to the compact CUSTOM LINE MF generator via separate hoses.

These compressors are designed to produce the compressed air required to power the brake and other pneumatic systems and devices of rolling stock of railway transport. •High efficiency and productivity. •Excellent price/quality ratio. •Long period of use •Ease of maintenance •Low lube oil consumption Basic delivery set: Compressor Heat exchangers Fan Safety valves Driven half-coupling Air filter Spare parts kit

The range of PK compressors includes the following models: PK-1.75A, PK-3.5A, PK-3.5AM, PK-5.25A. Compressors of this series are used both as part of compressor stations and installations with diesel and electric drive, and as brake compressors for railway rolling stock. •High efficiency and productivity. •Excellent price/quality ratio. •Long period of use •Ease of maintenance •Low lube oil consumption/ Basic delivery set: •Compressor •Heat exchangers •Fan •Safety valves •Driven half-coupling •Air filter •Spare parts kit Additional equipment: •Tubular electric heaters •Transition housings •Manometers and emergency pressure sensors •Leading half-coupling for connecting the electric motor

Regulation station for fixed set point control, adjusting range 20-50 °C, electronically regulated circulating pump E4 auto- 130 mm, regulating valve with internal sensor, safety limitation, adjustable bypass and integrated non-return valve

SANHA®-Heat Fastening set for wall heating modules for concrete and masonry.

SANHA®-Heat Fastening set for wall heating modules for metal framed wall constructions.

SANHA®-Heat Fastening set for wall heating modules for wooden walls

Chocolate tempering bowl with a wheeled mixer is a full-featured device for tempering and moulding of chocolate. The bowl is made of stainless steel and meant for the heating of chocolate. Digital controller sets the desired temperature with the precision of up to 0,1°С. Infra-red heating elements allow for even and energy-saving heating. Thanks to a large operating field, your working space is always neat and clean, and thus more convenient in use. Mixer is an additional option to the tempering bowl. Dimensional size 470 х 540 х 500 mm; Weight 19 kg; Loading capacity 10 – 20 kg; Minimum loading capacity 10 kg; Electric power supply 220 V ~ 50 Hz; Power intake 300 W/h; Housing material Stainless steel AISI 304; Bowl material Stainless steel AISI 304; Heating range 20 – 50 °C; Rotation speed 30; 45 rpm; Number of speeds 2; Speed adjustment Yes

Before the PET preform is inflated in the mold with compressed air, it is ensured that it reaches a certain temperature by passing through the infared oven. In order for the preform not to deform, the heat setting must be very sensitive. IR technology is very important in pet blowing ovens. The main reasons for this are: - To provide a homogeneous heat distribution on the preform - Since the cover area is thick and the bottom area is thin, the preform needs to be exposed to different temperatures. The most effective method for this is IR technology. - Water, carbonated beverage, etc. The requirement of the companies to respond to the needs makes the machine speed an important factor. Infrared blowing ovens are preferred over indirect heating systems as they perform very fast and effective heating. - Maintenance and repair time is very short. - Maintenance and repair costs are low.

A dryer is an equipment designed to dry inshell walnuts after harvesting, washing or cleaning the green pericarp. Drying of walnuts is a necessary step in the walnut business because the quality of the kernel and the storage time of the walnut in the shell depend on it. Advantage of Walnut Dryer: Dries the entire batch of nuts evenly thanks to the nut stirring system; Prevents nut spoilage – wet or unevenly dried nuts quickly become moldy; Does not spoil the quality of the nut – drying in the sun can cause the kernels to darken; Cost effective – energy saving system reduces heating time and costs; Shorter drying times compared to natural drying under the sun; Autonomy – does not require human participation in the drying process; Compactness – takes up little space; Ease of operation – one person is enough to load and control the dryer. Principle of operation: the nut is loaded into the hopper using the loading conveyor and the required heating temperature is set.

Dimensions Spring dimensioning according to customer request Material All spring materials Stainless steel Coating In-house phosphating Color code on the spring Additional coatings through external services Specialities Wave springs highly resistant against dynamic stress Wave springs highly resistant against static stress Minimal relaxation through heat treatment Automated setting- and force-inspection Customized dimensioning Axial installation space saving up to 50 % High spring rates with low tolerances

Dimensions Wire diameter: 0,2 – 8,0 mm Spring length up to 1500 mm Special profiles feasible Outside diameter max. 120 mm Customer specific spring shape Material All spring materials Coating All commonly coated spring steels In-house phosphating In-house stove-enameling Additional coatings through external services Specialities Compression springs highly resistant against dynamic stress Compression springs highly resistant against static stress Minimal relaxation due to heat treatment Fully automated setting- and force-inspection Smallest force tolerances Customer specific packaging Assembling and mounting with other components Rapid prototyping

RedZero is a smart control device to operate resistance heating blankets. Due to its compact design, this control unit is perfectly suited for the in-field repair of composite structures. The RedZero can be monitored remotely using its own WLAN via an intuitive graphical user interface. Using an app, the heating cycle can be set and adjusted as well as saved data can be downloaded using any mobile device (smartphone, tablet, laptop). This not only facilitates the documentation, but also serves as a quality assurance. The RedZero is the perfect addition for simple heating processes.

Device details: ■ 2 in 1: device contains the Hot Set Test as well as the Heat Pressure Test ■ Robust and compact set including the device and an equipment case ■ Possibility to attach a thermometer directly near the sample ■ Measurement according to the standards IEC EN 60811-507 (Hot Set Test) and IEC EN 60811-508 (Heat Pressure Test) regarding sample attachment and weight attachment ■ Precise choice of weights due to practical containers ■ Simultaneous measurement of up to 3 samples Optional - Hot Set Test complete ■ Sample rack for heat pressure and heat elongation test ■ Laser gauge ■ Thermal heat oven UN55 Size (WxLxH): 585 x 514 x 784 mm (23 x 20.2 x 30.9“) Weight: 57 kg (125.6 lbs) Volumen: 53 l Air exchange rate: 8-20x ■ Thermal heat oven UN110 Size (WxLxH): 745 x 584 x 864 mm (29 x 23 x 34“) Weight: 74 kg (163 lbs) Volumen: 108 l Air exchange rate: 8-20x