Heat-resistant steel - Import export

Product name: 99.95% tungsten plate sheet  Place of Origin: China Model Number: w1 w4 Width:50mm Standard: ASTM B760-2007 Surface: Rolling bright Shape: Square, round Purity: 99.95% Min Density: 19.2g/cm3 Certificate:ISO9001:2015 Size: (2-25)mm*(30-600)mm*Lmm Process: sintering, pressing, hot rolling Supply Ability: 8 Ton/Tons per Month Packaging Details: export standard Port of shipment: Xiamen Lead time: 15-20days Payment term: T/T,L/C etc. Purity:W≥99.95%  Application Mainly used to found ingredient of material, cutter and heads,tungsten wire for lights instruments and conductor of heat, crankshaft and cylinder barrel of advanced automobile, ingredient of kinds of heat-resistent steel, mainly used to guns, artillery,rockets, satellite,airplane and ship. Product Feature High melting point, High-density, high temperature oxidation resistance, long service life, resistance to Premium Quality

Exhaust gas bypass systems are made as additional equipment in exhaust gas heat exchangers. 3-way flap is required for bypass systems. By-passing the gas flow makes it possible to adjust temperature inside boiler (exhaust gas heat exchanger). Before delivery, we do a thorough test drive for every single damper, using actuator and special measurement equipment, to make sure that they function as expected and are ready to serve reliably on site. Availaible in steel, stainless steel or heat resistant materials Flange type and size depending on customer needs We develop dampers in different sizes and various temperature ranges Actuator options; Pneumatic actuator, Electrical actuator

Back in 1931 the history of an inimitable brush began: Kullen-Koti was already the patentee for this spiral brush with a double-sheet backing tape. Since then we have been developing this brush type and have manufactured the most variations. But one thing always remained the same: the double-sheet backing tape. Because of our experience, this system is the most effective and safe method. See our illustration which shows you the construction. Available brush sections: We manufacture our spiral brushes with four different section types in backing widths (WB) ranging from 4 mm to 18 mm. According to your requirements we choose the appropriate backing width considering the essential parameters: core diameter, fill material, fill density and working conditions. We supply backing tapes in bright steel as well as galvanised steel or stainless steel and acid/heat-resistant steel quality 1.4301, 1.4571, and 1.4541 (AISI 304, 316Ti) Manifoldness The roller brush coils with roller core are...

Our sealing brushes are available in many forms and with a wide variety of profiles. These profiles can also be used as mounting flanges, for example in a self-adhesive design, or fixed by screws or by welding. As our standard types which are available from stock we chose our most demanded sealing brushes concerning the trim heights and overall lengths. Our standard types we supply from stock in 7 different profile types made of galvanised steel, heat-resistant also in high thermal fluctuations. The stock types are filled with polyamide (PA6), mane hair (MAH) and phosphorbronze-wire (PHB).

Industrial cardboard shredders, of the FP299 ED12 series, are professional machines designed for all companies that have to manage used cartons and packaging within their production cycle. Used cartons can be conveniently cut and transformed, from inconvenient waste destined for disposal, to practical material for shockproof and filler packaging. With this cardboard shredder model, elastic nets can be obtained. All models are equipped with high efficiency heat-hardened steel blades that resist the passage of small pieces of metal and staples. In any case, whenever possible, it is advisable to remove the staples before chop the cardboard, to preserve the cutting knives as much as possible and also to avoid finding metal pieces inside the packaging material that is created. It is also possible to shred CDs, floppy disks and 86x54 mm PVC cards (standard credit card format).

We use plasma to cut sheet metal. We have state-of-the-art equipment that allows us to precisely process materials such as carbon/structural steel, stainless steel, heat-resistant steel and aluminum, among others. Our machine allows us to cut parts that fall within the dimensions: 6000 x 2000 mm in length, max thickness 40 mm. During the plasma cutting process, melting of the material takes place. It is then ejected from the slot by a highly concentrated plasma arc with high kinetic energy. The plasma method can be used to cut large-size parts. Like laser cutting, it provides high precision. TYPE OF MATERIAL CUT (max thickness 40 mm): - carbon steel / structural steel - stainless steel, heat-resistant - aluminum

Produced in Italy by NLMK Verona, which is become an undisputed producer of high quality forged blocks and bars, the ingots are available in a wide range of grades: •Case hardening steel •Heat treatable steel •Creep resistance steel •Martensitic stainless steel •Ball and roller bearing steel •Tool steel •Micro alloy steel •Nitriding steel •Tough at subzero steel •Pressure Vessel steel Applications : Oil & gas, wind power generation, shipbuilding, heavy engineering, nuclear power, automotive, etc. Category Case hardening steel Heat treatable steel Creap resistance steel Martensitic stainless steel Ball and roller bearing steel Tool steel Micro alloy steel Nitriding steel Tought at subzero steel Pressure vessel steel

SS 436 is a corrosion and heat resistant ferritic Chromium Steel. It can be polished to appear similar to Chromium plate. The material is magnetic in both annealed and cold rolled tempers. This grade of ferritic stainless steel has shown a greater resistance to ridging or roping defects as compared to type 430 stainless steel. The alloy can be readily blanked and formed. The material can be resistance welded, brazed, and soldered. SS 436 is resistant to atmospheric corrosion and fresh water, but it not resistant to most salts and seawater. It is resistant to scaling by oxidation up to about 1400°F. Available Sizes: SS 436 is available from Hamilton Precision Metals as strip product in thicknesses from 0.001” to 0.050” (0.0254 mm to 1.27 mm) in widths up to 15.0” (381 mm). The material conforms to ASTM A240 and UNS S43600.

SS 430 is a corrosion and heat resistant ferritic Chromium Steel. It can be polished to appear similar to Chromium plate. The material is magnetic in both annealed and cold rolled tempers. The alloy can be readily blanked and formed. The material can be resistance welded, brazed, and soldered. SS 430 is resistant to atmospheric corrosion and fresh water, but it not resistant to most salts and sea water. It is resistant to scaling by oxidation up to about 1400°F. Available Sizes: SS 430 is available from Hamilton Precision Metals as strip product in thicknesses from 0.001” to 0.050” (0.0254 mm to 1.27 mm) in widths up to 12.0” (304.8 mm). The material conforms to ASTM A240, FED QQS 766, and UNS S43000.

HPM® 455 is a precipitation heat treatable martensitic Stainless Steel. The composition provides a good combination of corrosion resistance and heat treated strength favorable for fatigue applications. The material is well suited for demanding spring devices The alloy has reasonably good forming characteristics in the annealed temper considering that it has a hardness of RC30. A significant radius is useful when bending is necessary in a fabrication. Cold working prior to the precipitation hardening treatment can drive finish strength up to 270,000 PSI (0.2% offset yield strength). The alloy retains a good strength through 800°F (Approx. 70% of room temperature). Resistance to stress – corrosion cracking is optimized by heat treating at 950°F. The overall corrosion resistant to normal atmospheric is equal to SS 430 with no staining. The alloy can be welded by resistance and inert gas shielded techniques. It also is suitable for brazing using a flux when possible.

VESTA oven is the perfect solution allowing to combine the advantages of grill and oven when cooking indoor. Closed Grill is charcoal-fired (with no gas or electricity). The combustion chamber is made of high heat – resistant steel (17GS – boiler steel) with thickness 6 mm

VESTA oven – is the perfect solution allowing to combine the advantages of grill and oven when cooking indoor. Closed Grill is charcoal-fired (with no gas or electricity). The combustion chamber is made of high heat – resistant steel (17GS – boiler steel) with thickness 6 mm.

VESTA oven – is the perfect solution allowing to combine the advantages of grill and oven when cooking indoor. Closed Grill is charcoal-fired (with no gas or electricity). The combustion chamber is made of high heat – resistant steel (17GS – boiler steel) with thickness 6 mm.

VESTA oven is the perfect solution allowing to combine the advantages of grill and oven when cooking indoor. Closed Grill is charcoal-fired (with no gas or electricity). The combustion chamber is made of high heat – resistant steel (17GS – boiler steel) with thickness 6 mm

The finum® permanent filters offer ample room for tea leaves to unfold and to release their full flavor. They are made of stainless-steel micro-mesh in a heat-tolerant frame from BPA-free material. These filters are durable and dishwasher-safe. The hat of the filter helps to prevent heat loss and doubles as drip-off tray. Highlights heat resistant plastic frame with stainless-steel fabric dishwasher safe extra tasteless materials lid doubles as a drip-off tray set comes with one blue and one green filter height (without lid): 7,3 cm inner diameter: 6,0 cm outer diameter: 7,0 – 9,7 cm Packaging 2 filters / pack 12 packs / master carton 720 packs / pallet 4 languages (EN, DE, FR, ES)

Our range of products includes welded charging aids such as guide grids, charge carriers, tempering baskets, traverses, basket inserts, wire mesh baskets, charging baskets, heat-resistant workpiece carriers, as well as hardening boxes for the heat treatment of steel or other metals. good strength properties at high temperatures Continuous operation in air up to approx. 1150 ° C with temperature changes up to approx. 1000 ° C perfectly suitable for heat treatment We use according to customer requirements .EN 1.4845 / AISI 310S .EN 1.4841 / AISI 314 Both materials are heat-resistant steel. Due to the higher chromium and nickel content and have a good resistance to oxidation. The good strength properties are still present even at higher temperatures. Both also have excellent chemical resistance up to 1100°C.

EWM welding consumables for MMA welding Welders can choose between different stick electrodes with different coating materials to work with: — unalloyed steels — low-alloy heat resistant steels — high alloy steels — Copper-based materials — Cladding

Engineered for : • hard and tough materials up to 1700 N/mm2 tensile strength • Stainless steel • heat resistant duplex steel • nickel based alloys • aluminium alloys • titanium bades alloys

The set contains: 1 Casserole with glass lid: 24 x 13.5 cm 6.1L 1 Casserole with glass lid: 20 x 11.5 cm 3.6L 1 Casserole with glass lid: 18 x 10.5 cm 2.6L 1 Casserole with glass lid: 16 x 9.5 cm 1,9L 1 Saucepan with glass lid: 16 x 9.5 cm 1.9L 1 Frying pan with glass lid: 24 x 6.5 cm 1 Frying basket with removable handle 1 Set kitchen utensils - 7 pieces 3 Metallic containers for spices and 1 magnetic base 2 Bakelite mats Characteristics: Construction Material: Stainless steel Heat resistant handles High strength glass lids with steam hole Uniform heat distribution 35% lower energy consumption Compatible with all stove tops 5 layers induction bottom With liquid measuring scale Weight 8.600 Kg Inox color Easy to wash in the dishwasher

Scrap and waste of heat-resistant steels alloyed with chromium, or chromium and titanium.

Scrap and waste of heat-resistant steels alloyed with chromium, nickel, molybdenum, tungsten and vanadium.

Scrap and waste of corrosion-resistant and heat-resistant steels alloyed with chromium and nickel and their combinations with silicon, manganese and titanium, aluminium and other alements except for molybdenum, tungsten, niobium and boron.

Scrap and waste of heat-resistant chromium-nickel steels with a high content of chromium and nickel

Scrap and waste of heat-resistant chromium-nickel steels with a high content of chromium and nickel

It is used in mechanical processing of metals and non-metallic structural materials in mechanical engineering (turning, milling, planing, chiseling and drilling). Hard alloys and composite materials based on tungsten carbide are widely used In the mining industry, as well as mixtures of tungsten carbide, titanium carbide, tantalum carbide (TT grade for particularly severe processing conditions, e.g. chiselling and planing of forgings made of heat-resistant steels, or impact drilling of heavy-duty materials). We buy scrap of the following categories: Tungsten 4, Tungsten 5, Tungsten 6

[Product Description] A-PRO series is available for cutting general-purpose and variety of workpiece materials such as pre-hardened steel, alloy steel, carbon steel, heat-resistant alloy steel, and reinforced plastic (below HRC 50). It is also suitable for using in shrink fit chucks due to its shape design to prevent the breakage of cutting edge. [Product Specification] Flat end mill : D0.4 ~ D20 + Various effective length / total length Ball end mill : D0.4 ~ D20 + Various effective length / total length C/R end mill : D1 ~ D12 + Various effective length / total length [Product Model] Flat : 2ARE, 2APE, 2AEL, 4APE, 4AEL, 4APL Ball : 2ARB, 2ASB, 2APB C/R : 2ARR, 2ACR, 2ALR, 4ARR, 4ACR, 4ALR [Product Use] * Suitable for various work materials (HRC below 45), pre-hardened steel, steel, carbon steel, mold steel * Strong wear-resistance and minimizing chipping by adapting A-pro coating * Excellent surface roughness of work pieces due to optimized cutting edge

[Product Description] A-PRO series is available for cutting general-purpose and variety of workpiece materials such as pre-hardened steel, alloy steel, carbon steel, heat-resistant alloy steel, and reinforced plastic (below HRC 50). It is also suitable for using in shrink fit chucks due to its shape design to prevent the breakage of cutting edge. [Product Specification] Flat end mill : D0.4 ~ D20 + Various effective length / total length Ball end mill : D0.4 ~ D20 + Various effective length / total length C/R end mill : D1 ~ D12 + Various effective length / total length [Product Model] Flat : 2ARE, 2APE, 2AEL, 4APE, 4AEL, 4APL Ball : 2ARB, 2ASB, 2APB C/R : 2ARR, 2ACR, 2ALR, 4ARR, 4ACR, 4ALR [Product Use] * Suitable for various work materials (HRC below 45), pre-hardened steel, steel, carbon steel, mold steel * Strong wear-resistance and minimizing chipping by adapting A-pro coating * Excellent surface roughness of work pieces due to optimized cutting edge

[Product Description] A-PRO series is available for cutting general-purpose and variety of workpiece materials such as pre-hardened steel, alloy steel, carbon steel, heat-resistant alloy steel, and reinforced plastic (below HRC 50). It is also suitable for using in shrink fit chucks due to its shape design to prevent the breakage of cutting edge. [Product Specification] Flat end mill : D0.4 ~ D20 + Various effective length / total length Ball end mill : D0.4 ~ D20 + Various effective length / total length C/R end mill : D1 ~ D12 + Various effective length / total length [Product Model] Flat : 2ARE, 2APE, 2AEL, 4APE, 4AEL, 4APL Ball : 2ARB, 2ASB, 2APB C/R : 2ARR, 2ACR, 2ALR, 4ARR, 4ACR, 4ALR [Product Use] * Suitable for various work materials (HRC below 45), pre-hardened steel, steel, carbon steel, mold steel * Strong wear-resistance and minimizing chipping by adapting A-pro coating * Excellent surface roughness of work pieces due to optimized cutting edge