Results for
ALNOR VENTILATION SYSTEMS LTD
Poland
The FLX-PLO-EPP-F plenum boxes are part of the FLX-REKU air distribution system designed for domestic mechanical ventilation systems, so-called the MVHR system, to which an air valve and FLX-HDPE / FLX-HDPE-A ducts with a diameter of Ø75 are mounted.
Request for a quoteALNOR VENTILATION SYSTEMS LTD
Poland
The heat recovery ventilation unit HRU-PremAIR has an air flow capacity of 350 m3/h at 100 PA. Designed to use aluminum heat exchangers and EPP self-supporting casing. Heat exchangers that are used depend on the model, such as counterflow aluminium heat exchanger (HRV) or counterflow enthalpy exchanger (ERV).
Request for a quoteALNOR VENTILATION SYSTEMS LTD
Poland
Heat recovery ventilation unit HRUPremAIR is a modern device with 350 / 450 or 500 m3/h air flow @ 100 Pa. Unit is made from cutting edge materials aluminim heat exchanger and EPP selfsupporting casing. Depending on the model, following heat exchangers are used counterflow aluminium heat exchanger (HRV) or counterflow enthalpy exchanger (ERV). Enthalpy exchangers in HRUPremAIRE series have a polymer membrane that effectively recovers heat and moisture from the extract air. Such membrane works like a membrane in waterproof trekking clothing i.e. it allows water vapour to pass through, but not liquid water and air. The enthalpy exchanger also blocks the transfer of odours, bacteria and spores. The exchanger material, is needless to say, primarily optimized for maximum heat recovery efficiency. PremAIR air handling units optionally can be equipped with the Constant Flow system, whose task is to maintain a constant air flow in the installation.
Request for a quoteALNOR VENTILATION SYSTEMS LTD
Poland
The HRUSlimAIR heat recovery unit is designed for residential buildings. The HRU has a capacity of 250 m3/h @ 100 Pa, generated by energyefficient EC fans. Thanks to a counterflow heat exchanger made of a plastic (PET), it achieves up to 90% heat recovery An ERV version with an enthalpy exchanger that recovers moisture is also available. Builtin electric preheater protects heat exchanger against freezing, wireless radio communication connects controllers and sensors, and all of it is enclosed inside a selfsupporting, insulating EPP casing. HRUSlimAIR can be installed in up to 3 positions, thanks to a special condensate drain system.
Request for a quoteALNOR VENTILATION SYSTEMS LTD
Poland
EPP manifold boxes are used for heat recovery ventilation (MVHR). Due to EPP's insulating properties, MVHR manifolds do not need to be insulated. Manifold boxes are intended to distribute 75mm ducting around the house. The number of connectors varies based on the specifications of the user: 4-18 spigots.
Request for a quoteOMEGA AIR
Slovenia
Classical systems of the screw compressor have a regulated air cooling of the lubricating oil, which means that the excess heat is discharged into the ambient by the fan. In this way, the heat is completely lost. External heat recovery unit AirWatt is designed to efficiently exploit the waste heat, generated during compression of air in rotary screw compressors. Sometimes this represents more than 70% of the energy consumed by the rotary screw compressor for the operation. This heat can then be used to heat domestic water or for heating, at almost no additional costs. This does not only help save money but is also environmentally friendly. The unit has two separate piping systems with counterflow. Energy exchange from a compressor to sanitary water occurs in a plate heat exchanger, where compressor oil and sanitary water meets. The unit is controlled by a thermostatic valve, which prevents the compressor system from getting too cold and damaging the compressor.
Request for a quoteENEVA ENERJI SISTEMLERI MUHENDISLIK SAN TIC LTD STI
Turkey
In processes where there is waste flue gas heat at a relatively low temperature (e.g. chimney outlets of boilers), a significant amount of savings can be achieved by producing hot water. While the feed water fed to the boiler in steam boiler applications can be preheated with the heat taken, the hot water needed by the facility can be produced in various process chimneys. In cases where there is a low hot water demand, the flue gas temperature can be lowered below the condensation limit, and the total efficiency can be increased above 100% according to the lower heating value of the fuel. According to the application conditions, economizer design can be made with materials such as carbon steel, stainless steel, titanium or PTFE (Teflon). Economiser equipment can be designed with smoke pipe or water pipe according to process conditions, and can be offered to customers with CE marking when necessary.
Request for a quoteALNOR VENTILATION SYSTEMS LTD
Poland
HRUWALLWI model ductless heat recovery unit comes equipped with a WiFi module. Its basic parameters, including max. heat recovery 82%, airflow rate 60 m3/h, and low sound power level 38 dB (A), are identical to those of the HRUWALL units. Methods for pairing devices and controlling them are different. With the addition of a WiFi module, the device can be connected to a local wireless network and controlled via a mobile app. Moreover, the app allows the pairing of devices by assigning two or more heat recovery units to a group. It is possible to have many groups so that 1 application can serve all HRV units in a building. A temperature sensor and relative humidity sensor are built into the HRUWALLWI, and the app displays their values.
Request for a quoteALNOR VENTILATION SYSTEMS LTD
Poland
HRUWALL is a singleroom decentralized heat recovery unit for concealed installation. The unit comes with a ceramic heat exchanger which boasts a maximum heat recovery ratio of 90% (the nominal heat recovery ratio is η=74.3% as per EN 1314182011). The energyefficient EC fan changes the running direction every 70 seconds to alternate between air supply and air exhaust. Low energy consumption and extremely low operating noise make this heat recovery unit a recommended solution for nonstop operation. The heat recovery unit has three speed levels to choose from, depending on the size of the area and indoor demands. HRUWALL10025 provides a sufficient air change level in areas up to 19m2. HRUWALL15060 provides a sufficient air change level in areas up to 45m2. We recommend installing the devices in pairs.
Request for a quoteALNOR VENTILATION SYSTEMS LTD
Poland
HRUWALLRC is a bidirectional ventilation unit, often described as decentralized or pushpull, with regenerative ceramic heat exchanger. It is intended for single room installation, usually installed in synchronised pairs. The heat exchanger material together with its unique honeycomb structure gives a maximal 82% thermal efficiency ratio (74% acc. to 1254/2014 EU Directive reference measuring point). The operating principle is analogous to HRUWALL unit is working in alternating flow mode, switches the air flow directions every 40120 seconds (pushpull) and it’s equipped with energy efficient EC fan (maximum power consumption is only 6 W for HRUWALLRC15060). The unit casing is made of ABS plastic. A remote controller with LCD display is included in the set. We recommend installing the devices in pairs
Request for a quoteALNOR VENTILATION SYSTEMS LTD
Poland
The HRUSlimAIR heat recovery unit is designed for residential buildings. The HRU has a capacity of 250 m3/h @ 100 Pa, generated by energyefficient EC fans. Thanks to a counterflow heat exchanger made of a plastic (PET), it achieves up to 90% heat recovery An ERV version with an enthalpy exchanger that recovers moisture is also available. Builtin electric preheater protects heat exchanger against freezing, wireless radio communication connects controllers and sensors, and all of it is enclosed inside a selfsupporting, insulating EPP casing. HRUSlimAIR can be installed in up to 3 positions, thanks to a special condensate drain system.
Request for a quoteTECHNOTRANS SOLUTIONS GMBH
Germany
A complete centralised cooling plant, including the required peripherals, can be set up in the absolute shortest possible time at the subsequent place of installation and is immediately ready for use by means of prefabrication and installation in a container. This way, the otherwise high investments for an operating building, the costs for installation and start-up of the plant are reduced. Container cooling plants almost have no limitations in terms of their capacity and variety of possible combinations. They are supplemented by peripheral systems such as water treatment and water preparation systems or compressed air compressors. A series of different cooling systems and the combined systems composed of these units are primarily available: Chiller Heat pump systems for heat recovery Cooling tower combined with a KU system as a closed, clean cooling circuit Air heaters for direct recovery of heat hermeticool-units hermeticool hybrid-units
Request for a quoteEUROPEM
Belgium
Normal incinerators for waste gas and/or waste liquids are used to destroy the hazardous waste streams with an efficiency higher than 99.99% whilst maintaining low NOx, CO and TOC emissions. Each incinerator is designed to meet project specific requirements, using standard modules and concepts. Vertical incinerators are mostly used where high dust formation e.g. ash or salt, are present. Most liquid and waste gas incinerators are horizontally configured. Key Features - Horizontal or vertical arrangement – Executed with or without mixing wall – Custom burner arrangements with separate waste gas or waste liquid injection lances, in the incinerator front wall, roof or body. – Designed to maintain a minimum residence time, typically one or two seconds, at a minimum temperature, typically 850°C or 1150°C depending on local legal requirements. Key Advantages - Destruction efficiency over 99.99% – Production of clean flue gases at high temperatures, as input for waste heat recovery units – No CO formation and low NOx emissions – Complete odour destruction
Request for a quoteHAMON
Belgium
Hamon Deltak’s forty-plus years of engineering experience and advanced mechanical capabilities give us the confidence to tackle any unique customer request. With over 1200 waste heat recovery units to date, HDI has unmistakable expertise in this industry.DI offers a few different types of waste heat boilers, watertube and firetube.Watertube Boilers:Designed similar to our HRSGs, but are refractory lined, and typically have tubes that can handle dirtier gasses than in the power generation industry.Applications that would use a watertube waste heat boiler are typically refinery processes such as: -Fluidized Catalytic Cracking,-Coke Calcining,-Sulphur Recovery
Request for a quoteNC MANUFACTURING AND ENGINEERING
Turkey
Engines for combined heat and power plants are operated with different fuels, including hydrogen, natural gas, biogas, sewage gas and special gases, plus diesel and other liquid fuels. In an exhaust gas heat exchanger, the hot exhaust gas from the CHP engines or CHP gas turbines is cooled, in the process heating water, a water-glycol mixture or thermal oil. This thermal energy can be used in a local or district heating system or for other industrial purposes.
Request for a quoteAPROVIS
Germany
What you can expect from APROVIS exhaust gas heat exchangers: - Efficient hot water generation in combined heat and power plants - Heating of thermal oil as an energy source - Individual solutions and compact designs - All the main components for the exhaust gas section and gas treatment are combined under one roof: proprietary products developed in-house - Cost-saving and reliable operation of the systems - Maximum functionality, safety and service - Temperature ranges: up to 600°C on the exhaust gas side or up to more than 1,000°C in the high-temperature range - Maximum functionality, safety and service - Temperature ranges: up to 600°C on the exhaust gas side or up to more than 1,000°C in the high-temperature range - Certifications: PED 2014/68/EU, ASME Code, EAC - Can be used in all plants with exhaust gases from hydrogen, natural gas, biogas, sewage gas and special gases, plus diesel and other liquid fuels - Geared to international standards and directives
Request for a quoteAPROVIS
Germany
What you can expect from APROVIS steam generators: - Efficient steam generation in combined heat and power plants - Cost-saving and reliable operation of the systems - Maximum functionality, safety and service - Performance areas: 1 to 25 baro, 100 to 25,000 kg/h - Certifications: PED 2014/68/EU, ASME Code, EAC - Can be used in all plants with exhaust gases from hydrogen, natural gas, biogas, sewage gas and special gases, plus diesel and other liquid fuels - Geared to international standards and directives - Single, double or triple version for operation with one, two or three engines with completely separate exhaust gas sections - The APROVIS Controlling System (ACS) is individually adapted to each project and is delivered in the required language - Access to the ACS using a modem enables easy fine-tuning of the system or remote maintenance for swift support if and when discrepancies occur during operation
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
BOSCH INDUSTRIEKESSEL GMBH - INDUSTRIAL BOILERS
Germany
— Environmentally friendly generation of steam from available waste heat — The perfect addition to energy concepts involving combined heat and power generation — High efficiency through efficient tubular heat exchanger and thermal insulation — Additional efficiency gain thanks to optional integrated economiser — Matched, modular system for easy planning and fast installation
Request for a quoteBRÜCKNER TEXTILE TECHNOLOGIES GMBH & CO. KG
Germany
Our heatrecovery systems heat fresh air with the thermal energy of exhaust air and can be placed directly on top of a stenter frame. This system can also be retrofitted for older dryers. The benefits are high energy savings which allow payback periods of less than two years, depending on the layout and process, highly efficient platetype heat exchangers with nonstick coating, optimum ease of maintenance by removable drawersized heat exchanger modules, external cleaning of the heatexchangers in a hot water bath with ultrasonic cleaning equipment, high power density, higher than with usual tubetype heatexchangers.
Request for a quoteENEVA ENERJI SISTEMLERI MUHENDISLIK SAN TIC LTD STI
Turkey
Waste heat boilers are the equipment used in the production of process fluids such as steam, hot water or hot water by recovering this heat in processes where there is high temperature waste heat. For example, cogeneration plants, cement plants, glass factories or steel production process chimneys are potential sources for waste heat boiler application. Design and production with CE/ASME mark can be made according to EN12952 & EN12953 & ASME standards with smoke tube, water tube or combined. Depending on the operating time of the system, the payback period for installing such boilers may be limited to several years, so they are quite attractive systems to invest in. Our team has deep experience in the design, manufacture and turnkey installation of such systems.
Request for a quoteBROX MAKINE SANAYI VE TICARET LTD. STI.
Turkey
Waste heat recovery boiler, in steam, water or thermal oil, fire-tube or water tube, designed as per exhaust gas parameters, turnkey project flexible solutions.
Request for a quoteERALP BOILER & ENERGY TECHNOLOGIES
Turkey
Waste heat boilers produced from alloy, high alloy and stainless steel according to physical properties, content, flow and process conditions of gas are designed and produced to be Water Pipe Waste Heat Boilers and Flame Smoke Pipe Waste Heat Boilers. In the gas engines and in the gas turbine, the high-temperature waste gas resulting from the combustion is evaluated by producing waste heat boilers and steam, which increases the overall system efficiency. Waste heat boilers designed and produced for heat recycling are to be heated according to flow and process; Industrial facilities Power Plants In cogeneration plants It is used in organic rankine conversion systems (ORC). These heat recovery steam generators (HRSGs), which are used to convert steam back into electricity from steam turbine back-burning gas, are also called HRSG (Heat Recovery Steam Generator) in the Combined Cycle Power Plant (CCPP).
Request for a quoteHAMON
Belgium
Hamon Deltak, Inc. has had the opportunity to engineer and manufacture more than 500 HRSGs in the last 40 years. From big to small, with different levels of complexity, our engineers have experience with the type of project you need. What sets HDI apart is the level of care that goes into engineering each HRSG project, and since half of our engineers have been at HDI for more than 15 years, it's easy to see why our HRSG standard is synonymous with quality.
Request for a quoteResults for
Heat recovery units - Import exportNumber of results
24 ProductsCompany type
Category