Results for
ENDRESS+HAUSER AG
Switzerland
The BTU meter RH33 is used in applications with liquid energy carriers.It calculates the thermal energy of water acc. to EN1434, glycol/water mixtures or other fluids such as thermal oils. Temperature sensor matching using calibrated temperature sensors is done in the device. Potential for cost savings can be shown by using the software available as an accessory. The device has a custody transfer approval and allows bi-directional measurement, e.g. charging/discharging of a heat accumulator.
Request for a quoteVKF RENZEL GMBH
Germany
The "Easy" barrier stand is characterised by its particularly low base plate. This barrier post is ideally suited for the construction of personnel guidance systems as well as the marking of non-accessible areas. The included belt rewinds automatically and can be replaced if necessary using the belt cassette. Place the barrier post "Easy" in places where a flat stand is useful due to heating, sales counters or similar. You can choose the colour for belt and post in our offer to match your project.
Request for a quotePETER HUBER KÄLTEMASCHINENBAU SE
Germany
The TC range of immersion coolers are a flexible solution for a variaty of cooling tasks. The devices are simple and universally used for rapid cooling of fluids. Typical applications include counter-cooling for heat circulation thermostats or replacement of dry ice. For many applications immersion coolers are also an environmentally friendly alternative to mains water cooling. The TC immersion coolers are suitable for unsupervised use, for cooling tasks which require continuous cooling or as a variant with temperature control and a Pt100 probe. The models with the type affix "E“ have an LED display with entry of nominal values and regulate with a precision of ±0.5 K. A spiral-shaped or flexible immersion cooling probe made out of stainless steel is available for all models so that fluids can be cooled in virtually all vessel types. The compact housing is made from high quality stainless steel, and is fitted with carrying grips. Universal solution for many cooling tasks Rapid...
Request for a quotePETER HUBER KÄLTEMASCHINENBAU SE
Germany
The TC range of immersion coolers are a flexible solution for a variaty of cooling tasks. The devices are simple and universally used for rapid cooling of fluids. Typical applications include counter-cooling for heat circulation thermostats or replacement of dry ice. For many applications immersion coolers are also an environmentally friendly alternative to mains water cooling. The TC immersion coolers are suitable for unsupervised use, for cooling tasks which require continuous cooling or as a variant with temperature control and a Pt100 probe. The models with the type affix "E“ have an LED display with entry of nominal values and regulate with a precision of ±0.5 K. A spiral-shaped or flexible immersion cooling probe made out of stainless steel is available for all models so that fluids can be cooled in virtually all vessel types. The compact housing is made from high quality stainless steel, and is fitted with carrying grips. Universal solution for many cooling tasks Rapid...
Request for a quotePETER HUBER KÄLTEMASCHINENBAU SE
Germany
The TC range of immersion coolers are a flexible solution for a variaty of cooling tasks. The devices are simple and universally used for rapid cooling of fluids. Typical applications include counter-cooling for heat circulation thermostats or replacement of dry ice. For many applications immersion coolers are also an environmentally friendly alternative to mains water cooling. The TC immersion coolers are suitable for unsupervised use, for cooling tasks which require continuous cooling or as a variant with temperature control and a Pt100 probe. The models with the type affix "E“ have an LED display with entry of nominal values and regulate with a precision of ±0.5 K. A spiral-shaped or flexible immersion cooling probe made out of stainless steel is available for all models so that fluids can be cooled in virtually all vessel types. The compact housing is made from high quality stainless steel, and is fitted with carrying grips. Universal solution for many cooling tasks Rapid...
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
VICTORY LIGHTING (UK) LTD.
United Kingdom
Infrared lamps provide a clean, efficient heat source for the catering industry in equipment such as heated counters and serveries. Victory Lighting’s infrared range includes hard glass, screw-in lamps for standard lamp holders, as well as double-ended, linear lamps for heater fittings. Victory also supplies lamp holders for those who wish to develop their own equipment.
Request for a quoteMEDEK & SCHÖRNER GMBH
Austria
Marking cold product within the extrusion line - downstream from the cooling bath and drying fan - or as a separate operation (e.g., in a winding system). Footage and text marking by hot foil stamping Speeds up to 150 m/minute and above with special color tape pay-off unit Within extrusion line or in a separate process CONFIGURATION One marking wheel 2 ft. in circumference with built-in 5-digit footage counter and 300-mm type segment supports for installing engraved type segments. Complete high-performance heating system. Counter: raised type, standard number size: 3.5 mm, manual reset lever. Marking wheels available separately for quick changing of text or codes. Convertible to meter marking by re-placing sensing and marking wheels.Hot stamping marker using electrically heated, engraved dies and pigment tape. Marks product length in 2-ft. increments. Optional, manually adjustable coding heads for stamping frequently changing code numbers.
Request for a quoteMEDEK & SCHÖRNER GMBH
Austria
Marking cold product within the extrusion line - downstream from the cooling bath and drying fan - or as a separate operation (e.g., in a winding system). Meter marking by hot foil stamping Speeds up to 150 m/minute and above with special color tape pay-off unit STANDARD CONFIGURATION One marking wheel 1 m in circumference with built-in 4-digit meter counter and 300-mm type segment supports for installing engraved type segments. Complete high-performance heating system. Counter: raised type, standard number size: 3.5 mm, manual reset lever. Marking wheels available separately for quick changing of text or codes. Convertible to footage marking by re-placing sensing and marking wheels.Hot stamping marker using electrically heated, engraved dies and pigment tape. Marks product length in meters. Optional, manually adjustable coding heads for stamping frequently changing code numbers. Prints user selectable text. Abrasion-proof, exceptionally clear lettering.
Request for a quoteMEDEK & SCHÖRNER GMBH
Austria
Indenting text and meter marks in cable insulation within the extrusion line after the cooling bath, or in a separate winding system (indenting cold material). Text and meter marking Electrically heated marking wheel for indenting cold material Within the extrusion line after the cooling bath, or in a separate winding system Speeds up to 100 m / minuteOne marking wheel 1 m in circumference with built-in 4-digit meter counter and 300-mm type segment supports for installing engraved type segments. With robust pillar stand, pneumatic support for the marking wheel allowing easy open and close function, and guiding rollers for a diameter range of 10-250 mm (or 6-80 mm without price change). Marking head and guiding rollers separately adjustable in height by rack-jack devices. With heating system. Counter: raised type for clear indented lettering, standard number size: 3.5 mm, manual reset lever. FEATURES Electrically heated marking wheel for indenting cold material.
Request for a quoteMEDEK & SCHÖRNER GMBH
Austria
Embossing text and meter marks in cable insulation immediately after the extruder. Text and meter marking Embossed stamping immediately after the extruder Speeds up to 300 m / minute STANDARD CONFIGURATION One marking wheel 1 m in circumference with built-in 4-digit meter counter and 300-mm type segment supports for installing engraved type segments. With robust pillar stand and guiding rollers for a diameter range of 10-250 mm (or 6-80 mm without price change). Marking head and guiding rollers separately adjustable in height by rack-jack devices. No heating system. Counter: recessed type with decompression ducts for clearer lettering, manual reset lever.Standard application: Embossed stamping of product length in meters and of user selectable text. Optional, manually adjustable coding heads for stamping frequently changing code numbers. Complete with all required accessories except engraved type segments.
Request for a quoteResults for
Heat counters - Import exportNumber of results
11 ProductsCompany type