Results for
BORNEMANN GMBH
Germany
Sheet stamping dies, also called double stamping dies, with top and bottom parts for embossed or recessed stamping of sheets. For the production of these stamping dies, the strength of the sheet to the stamped is enormously significant. The movement between top and bottom stamp is designed according to these requirements. The parts are hardened in line with the purpose and delivered ready for use. We adopt the data from your drawings or drafts for production.
Request for a quoteFÖHRENBACH GMBH
Germany
The miniature roller slides can be delivered either as open type or with end plates. The exterior part is made of aluminium, the interior part consists of hardened steel. With standard drilling pattern.
Request for a quoteFÖHRENBACH GMBH
Germany
The miniature roller slides can be delivered either as open type or with end plates. The exterior part is made of aluminium, the interior part consists of hardened steel. With standard drilling pattern.
Request for a quoteVOSSLOH-VERBINDUNGSELEMENTE, INH. MICHAEL VOSSLOH E.K.
Germany
Thickness and strength: 0.3 to 100 mm Parts length: to 500 mm Materials: steel, stainless steel, aluminum and plastic In association with our high qualified partners the supply of hardened and coated standard parts is self-evident. Our products are galvanized on request, painted, anodised, phosphated, zinc flake coated (e.g. GEOMET) etc
Request for a quoteVOSSLOH-VERBINDUNGSELEMENTE, INH. MICHAEL VOSSLOH E.K.
Germany
Turned parts, CNC turned parts, long turned parts Part diameter: 0.3 to 200 mm Parts Length: 1000 mm Materials: steel, stainless steel, brass, aluminum and plastic In association with our high qualified partners the supply of hardened and coated standard parts is self-evident. Our products are galvanized on request, painted, anodised, phosphated, zinc flake coated (e.g. GEOMET) etc.
Request for a quoteVOSSLOH-VERBINDUNGSELEMENTE, INH. MICHAEL VOSSLOH E.K.
Germany
Turned parts, CNC turned parts, long turned parts Part diameter: 0.3 to 200 mm Parts Length: 1000 mm Materials: steel, stainless steel, brass, aluminum and plastic In association with our high qualified partners the supply of hardened and coated standard parts is self-evident. Our products are galvanized on request, painted, anodised, phosphated, zinc flake coated (e.g. GEOMET) etc.
Request for a quoteVOSSLOH-VERBINDUNGSELEMENTE, INH. MICHAEL VOSSLOH E.K.
Germany
STUD BOLTS THREADED BOLTS CLEVIS PINS DIN 1438 DIN 1445 SPLINT-PIN BOLTS, HEAD BOLTS: DIN 1433 (without head) DIN 1434 (with head) DIN 1435 (with head) DIN 1436 (with head) DIN 1443 ISO 2340 (without head) DIN 1444 ISO 2341 (with head) All bolts based on DIN / EN / ISO or by drawing (modified standard) bolt clevis pin DIN 1445 Material: Machining steel e.g. 9SMn(Pb)28k, 11SMn(Pb)30+C... Carbon Steel e.g. C15, C35, C45... Stainless Steel e.g. 1.4305, 1.4301, 1.4571, 1.4104... Aluminum e.g. AlMgPb, AlMgSi0,5, AlMgSi1... In association with our high qualified partners the supply of hardened and coated standard parts is self-evident. Our products are galvanized on request, painted, anodised, phosphated, zinc flake coated (e.g. GEOMET) etc
Request for a quoteVOSSLOH-VERBINDUNGSELEMENTE, INH. MICHAEL VOSSLOH E.K.
Germany
STUD BOLTS THREADED BOLTS CLEVIS PINS DIN 1438 DIN 1445 SPLINT-PIN BOLTS, HEAD BOLTS: DIN 1433 (without head) DIN 1434 (with head) DIN 1435 (with head) DIN 1436 (with head) DIN 1443 ISO 2340 (without head) DIN 1444 ISO 2341 (with head) All bolts based on DIN / EN / ISO or by drawing (modified standard) bolt clevis pin DIN 1445 Material: Machining steel e.g. 9SMn(Pb)28k, 11SMn(Pb)30+C... Carbon Steel e.g. C15, C35, C45... Stainless Steel e.g. 1.4305, 1.4301, 1.4571, 1.4104... Aluminum e.g. AlMgPb, AlMgSi0,5, AlMgSi1... In association with our high qualified partners the supply of hardened and coated standard parts is self-evident. Our products are galvanized on request, painted, anodised, phosphated, zinc flake coated (e.g. GEOMET) etc.
Request for a quoteVOSSLOH-VERBINDUNGSELEMENTE, INH. MICHAEL VOSSLOH E.K.
Germany
SPLINT-PIN BOLTS, HEAD BOLTS: DIN 1433 (without head) DIN 1434 (with head) DIN 1435 (with head) DIN 1436 (with head) DIN 1443 ISO 2340 (without head) DIN 1444 ISO 2341 (with head) All bolts based on DIN / EN / ISO or by drawing (modified standard) bolt clevis pin DIN 1445 Material: Machining steel e.g. 9SMn(Pb)28k, 11SMn(Pb)30+C... Carbon Steel e.g. C15, C35, C45... Stainless Steel e.g. 1.4305, 1.4301, 1.4571, 1.4104... Aluminum e.g. AlMgPb, AlMgSi0,5, AlMgSi1... In association with our high qualified partners the supply of hardened and coated standard parts is self-evident. Our products are galvanized on request, painted, anodised, phosphated, zinc flake coated (e.g. GEOMET) etc.
Request for a quoteKOVINSKI IZDELKI HRAST CNC TURNING
Slovenia
We produce precision machined components from 2mm to 52 mm diameter. Our customers are from automotive, electro, white goods, hydraulic, pneumatic and machine building industries. Using up to date production and quality equipment we can offer machining of parts from different raw materials like: Stainless steel (austenitic, ferritic, martensitic) Aluminum (bars or casted parts) Carbon and hardened steel (ETG, forged steel, steel for heat treatment) Brass Products for automotive industry. sensor housings screws pins pivot pins shafts connectors bolts washers bushes nuts
Request for a quoteGMN PAUL MÜLLER INDUSTRIE GMBH & CO. KG
Germany
GMN insert elements are available in many different diameters. The FE 400 Z, FE 400 Z2 and FE 8000 Z series are equipped with a tension spring. The FE 400 M series has a meander spring. GMN insert elements are designed for installation on hardened and ground connecting parts. They are suitable for either oil or grease lubrication. All GMN insert elements can be used as indexing clutches, backstops or as overrunning clutches.
Request for a quoteNOVA WERKE AG - NOVA SWISS
Switzerland
Isostatic presses are specifically developed and manufactured by Nova Swiss Sarl in accordance to customer requirements. Cold, warm and hot presses are available for use at up to 10,000 bar and at temperatures from -20 to 2,200°C. Applications Sintering of powders for the production of complex geometries with high resilience. (Plastic, ceramic, graphite, metal, etc.) Sterilization of food Pressure / temperature simulations Hardening of mechanical parts Elimination of natural porosities in raw metallic materials Pressing of sintered parts (carbides, steels, etc.)
Request for a quoteDERYA M.D.M SAN. VE TIC. A.S / GLASSYMOULD®
Turkey
Blow Mold, Stem Mold, Press Mold, Conical Mold, Spinning Mould, Mold Base, Plunger, Plunger Adapter, Bottom Plate, Mould Insert, 4-part Neck Ring. Machine Parts, Spares: Press Mold Holder, Blow Mold Holder, Mold Holder Adapters- Inserts, H-28 Neck Ring Holder(Basket), Mold Holder Hangers, Wear Plates, Push-up Mechanism and Components, Burners Graphite Funnels, and other various parts. Materials utilized: Stainless Steel, Steel, Bronze, Brass, Aluminum. Hard surfacing & Coatings: Colmonoy, Stellite welding coating. Material Heat Treatment and Hardening. Parts for Glass Industry, Shipyard, Marine Industry, Hydraulic Industry
Request for a quoteKFB CLARFELD GERMANY GMBH
Germany
Axial needle cage assemblies Axial needle cage assemblies, composed of synthetic or metal axial cage assemblies with integrated needle rollers, have an extremely low overall height. They tolerate high axial forces acting in one direction, radial forces must be taken up separately. The deployment of axial needle cage assemblies requires that hardened and bevelled thrust surfaces may be used as raceways. Thrust bearing washers Thrust bearing washers are punched, hardened and polished and can be used as shaft or housing washers. These washers are appropriate when the adjoining machine part when not hardened, is rigid enough and of a stable form. Axial needle bearings Axial needle bearings are components made up of axial needle rollers and cage assemblies and axial washers with centring bore. They can be combined with needle sleeves, needle bushes and needle bearings. The thrust surface for the cage assembly must be hardened and bevelled. The product types AXK and K are applicable here
Request for a quoteEMAG ELDEC INDUCTION GMBH
Germany
Efficient, rugged, and flexible – eldec CUSTOM LINE MF generators offer state-of-the-art medium-frequency technology perfectly matched to your requirements. Their MF power ranges from 200 to 1,500 kW. The frequency range is 8 to 40 kHz. Induction heating with a comprehensive set of options Customized energy sources are the key for effective induction heating or hardening of parts. A made-to-measure solution ensures stable production processes and low energy consumption. CUSTOM LINE MF medium-frequency generators by eldec provide exactly these kinds of qualities. The configuration options are virtually unlimited. In addition to a wide range of power and frequencies, users have the choice between solutions with single and multiple outputs. As a result, several inductors can be connected to the compact CUSTOM LINE MF generator via separate hoses.
Request for a quoteALLMATIC-JAKOB SPANNSYSTEME GMBH
Germany
Scope of application: -Horizontal & vertical use - therefore suitable for vertical & horizontal CNC milling machines -Conventional clamping, grip clamping and low tension clapping possible -Titanium 2 K - ideal for use on 5-axis machining centers -Clamping of raw, thermal & saw cut parts by penetrating hardened & interchangeable grip elements into the work piece -The support jaws safely & cost effectively allow raw part, different types of materials & complex geometries to be handled Product features: -To monitor & optimize milling processes -Safety for people & machines -High flexibility - the modular clamping system combines almost all possibilities of our tried & tested models -Titanium 2 M - finely polished sides so that all sides can be used -Titanium 2 K and M can be vertically used -Force translated high-pressure spindle. -Increased power stroke for safe clamping of raw parts -Loss of 8 mm clamping edge in low tension, 3 mm with GRIPP
Request for a quoteALLMATIC-JAKOB SPANNSYSTEME GMBH
Germany
Scope of application: -Horizontal and vertical use - therefore suitable for vertical and horizontal CNC milling machines -Conventional clamping, grip clamping and low tension clapping possible -Titanium 2 K - ideal for use on 5-axis machining centers -Clamping of raw, thermal and saw cut parts by penetrating hardened and interchangeable grip elements into the work piece -The support jaws safely and cost effectively allow raw part, different types of materials and complex geometries to be handled Product features: -To monitor and optimize milling processes -Safety for people and machines -High flexibility - the modular clamping system combines almost all possibilities of our tried and tested models -Titanium 2 M - finely polished sides so that all sides can be used -Titanium 2 K and M can be vertically used Force translated high-pressure spindle -Increased power stroke for safe clamping of raw parts -Loss of 8 mm clamping edge in low tension, 3 mm with GRIPP
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
ALLMATIC-JAKOB SPANNSYSTEME GMBH
Germany
Scope of application: -Horizontal & vertical use - therefore suitable for vertical & horizontal CNC milling machines -Conventional clamping, grip clamping & low tension clapping possible -Titanium 2 K - ideal for use on 5-axis machining centers -Clamping of raw, thermal & saw cut parts by penetrating hardened and interchangeable grip elements into the work piece -The support jaws safely and cost effectively allow raw part, different types of materials & complex geometries to be handled Product features: -To monitor & optimize milling processes -Safety for people & machines -High flexibility - the modular clamping system combines almost all possibilities of our tried and tested models -Titanium 2 M - finely polished sides so that all sides can be used -Titanium 2 K & M can be vertically used -Force translated high-pressure spindle. -Increased power stroke for safe clamping of raw parts -Loss of 8 mm clamping edge in low tension, 3 mm with GRIPP
Request for a quoteALLMATIC-JAKOB SPANNSYSTEME GMBH
Germany
Scope of application: -Horizontal and vertical use - therefore suitable for vertical and horizontal CNC milling machines -Conventional clamping, grip clamping and low tension clapping possible -Titanium 2 K - ideal for use on 5-axis machining centers -Clamping of raw, thermal and saw cut parts by penetrating hardened and interchangeable grip elements into the work piece -The support jaws safely and cost effectively allow raw part, different types of materials and complex geometries to be handled Product features: -To monitor and optimize milling processes -Safety for people and machines -High flexibility - the modular clamping system combines almost all possibilities of our tried and tested models -Titanium 2 M - finely polished sides so that all sides can be used -Titanium 2 K and M can be vertically used -Increased power stroke for safe clamping of raw parts Loss of 8 mm clamping edge in low tension, 3 mm with GRIPP
Request for a quoteResults for
Hardened parts - Import exportNumber of results
20 ProductsCountries
Company type