Results for
PGR DRIVE TECHNOLOGIES
Turkey
Offered for drive systems with low moments and regular loads, worm gear units stand out with their light, modernly designed bodies with high strength, as well as silent operation.
Request for a quotePGR DRIVE TECHNOLOGIES
Turkey
PCS series gear units of PGR Drive Technologies serving up to 60 tones of capacity are optimum solution partners for crane industry thanks to their silent, compact bodies and easy maintenance features.
Request for a quotePGR DRIVE TECHNOLOGIES
Turkey
Developed for feeding systems of poultry farms, PX/PPC series are preferred thanks to their silent and trouble-free operations and lightweight structures.
Request for a quotePGR DRIVE TECHNOLOGIES
Turkey
PYK series products that have wide reduction ratio and high resistance against heavy and variable loads in horizontal, vertical and inclined feed mixing systems provide optimum solutions in TMR systems for cattle and small cattle livestock facilities.
Request for a quotePGR DRIVE TECHNOLOGIES
Turkey
PGR Drive Technologies provide solutions with PEX series extruder systems with high axial and radial forces thanks to their rigid, strong case and wide reduction ratios.
Request for a quotePGR DRIVE TECHNOLOGIES
Turkey
The rotation of high speed shaft should not be more than 1500 rpm; The circumferential velocity of gear tranmission should not be more than 20 m/sec; The temperature of work environment should be -40-45°C. If it below 0°C, before start, the lubricating oil should be pre-heated to above 0°C. This speed reducer can be run at clockwise and counterclockwise direction.
Request for a quotePGR DRIVE TECHNOLOGIES
Turkey
The most important feature of the PCD series, which has a different design from traditional gearboxes, is that the drive elements transmit the movement by rolling over each other, instead of the friction movement of the gears with each other as in normal gears.
Request for a quotePGR DRIVE TECHNOLOGIES
Turkey
These series which are provided in foot- (PA) and flange (PF) mounted options serve up in drive systems that need wide reduction ratio and maximum 26900 Nm of output moment.
Request for a quotePGR DRIVE TECHNOLOGIES
Turkey
Helical bevel gear units with 90° input and output axis range. Casing with feet, flange F options. A rigid structure in case. System resistance calculations are made in accordance with ISO, DIN and NIEMANN standards. Different input options may be provided (Coupled motor, IEC, PAM, W, Servo motor connected, ...). Different output options available (Solid shaft, Hollow shaft, With shrink disc, ...).
Request for a quotePGR DRIVE TECHNOLOGIES
Turkey
Helical and worm gear units with 90° input and output axis range. Casing with feet, flange F options Rigid case structure and suitable for heat transfer. System resistance calculations are made in accordance with ISO, DIN and NIEMANN standards. Different input options may be provided (Coupled motor, IEC, PAM, W, Servo motor connected, ...). Different output options available (Solid shaft, Hollow shaft, With shrink disc, ...).
Request for a quotePGR DRIVE TECHNOLOGIES
Turkey
PD / PM series parallel shaft mounted gear units produced with hollow shaft or solid shaft are commonly preferred in conveyor drive systems.
Request for a quotePGR DRIVE TECHNOLOGIES
Turkey
PGR Drive Technologies provide solutions in planet gear units with PTO, IEC, parallel shaft input options which offer high reduction ratio in small volumes in drive systems with heavy and variable loads thanks to their compact and modular structure up to 850000 Nm of moment values.
Request for a quotePGR DRIVE TECHNOLOGIES
Turkey
Industrial type gear units operate especially under heavy working conditions, have rigid case, bear high moments up to 480000 Nm and stand out with silent operation and easy maintenance features
Request for a quotePGR DRIVE TECHNOLOGIES
Turkey
Preferred in various transfer systems thanks to their wide reduction ratio, compact structure and easy maintenance, PGR Drive Technologies Pt/A Series gear units can be driven with belt-pulley or chain mechanisms.
Request for a quoteIGUS® GMBH
Germany
The twisterchain product line offers a wide range for circular movements and is available in four sizes. Modular in width and radius, therefore flexible in applications where rotary and spiral movements up to 360° and more with high loads and smooth operation are required. The twisterchain applications are available with guide trough, which has the following advantages: guidance of the energy chain, reduced abrasion of the energy chain, optimal operational smoothness, rotation angle up to 360° from stock. - Strong, high fill weights, smooth operation, weight-optimised - Rotary speeds up to 1m/s and more - Circular/spiral movements up to 360° from stock (up to 400° upon request) - Cable-friendly, smooth interior crossbars openable along the inner and outer radius - Successfully tested for over 1 million cycles in the igus laboratory
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
MH MULTIPACK SDN BHD
Malaysia
Vacuum Stoppering system to minimize entrapped filling & drip-free. Full Servo Driven for highest flexibility, highest repeatability and operator friendly conversion. Valveless Rotary Piston pump for Hygiene Filling. Contact parts are FDA Approved material and autoclavable. Optional Laminar Air Flow Booth. Optional N2 flushing. Optional FDA 21 CFR Part 11. Optional Realtime Equipment OEE monitoring anytime, anywhere. Optional 100% Weight In Process Control of filling weight system by tare in / tare out to obtain nett filling weight check.
Request for a quoteMH MULTIPACK SDN BHD
Malaysia
Aseptic Nested Filing Line from De-bagging, De-liding, Filling and Stoppering system. Vacuum Stoppering system to minimize entrapped filling & drip-free. “Trackless” Rubber stopper feeding to eliminate jamming at the track. Statistical Weight In Process Control of filling weight system by tare in / tare out to obtain nett filling weight check. Full Servo Driven for highest flexibility, highest repeatability and operator friendly conversion.
Request for a quoteMH MULTIPACK SDN BHD
Malaysia
Full Servo Driven for highest flexibility, highest repeatability and operator friendly conversion. Valveless Rotary Piston pump for Hygiene Filling. Contact parts are FDA Approved material and autoclavable. Laminar Air Flow Booth. Auto rejection without machine stop. Optional 100% IPC Tare-in, Tare-out weight check. Optional N2 flushing. Optional FDA 21 CFR Part 11. Optional Realtime Equipment OEE monitoring anytime, anywhere.
Request for a quoteMH MULTIPACK SDN BHD
Malaysia
Full Servo Driven for highest flexibility, highest repeatability and operator friendly conversion. Valveless Rotary Piston pump for Hygiene Filling. Contact parts are FDA Approved material and autoclavable. Laminar Air Flow Booth. Auto rejection without machine stop. Optional 100% IPC Tare-in, Tare-out weight check. Optional N2 flushing. Optional FDA 21 CFR Part 11. Optional Realtime Equipment OEE monitoring anytime, anywhere.
Request for a quoteMH MULTIPACK SDN BHD
Malaysia
Full Servo Driven for highest flexibility, highest repeatability and operator friendly conversion. Precision Auger Filling System with wide filling range without change part. Bottle lifted during filling for clean filling. Swingable Filling module for easy dismantle when cleaning. Contact parts are FDA Approved material and autoclavable. Patented Elevator cap sorter without vibration noise, less than 70dB. Cap closing torque are servo control for highest consistency. Auto rejection without machine stop. Optional 100% IPC Tare-in, Tare-out weight check. Optional N2 flushing. Optional FDA 21 CFR Part 11. Optional Realtime Equipment OEE monitoring anytime, anywhere. Machine Specification
Request for a quoteMH MULTIPACK SDN BHD
Malaysia
Full Servo Driven for highest flexibility, highest repeatability and operator friendly conversion. Precision Auger Filling System with wide filling range without change part. Bottle lifted during filling for clean filling. Swingable Filling module for easy dismantle when cleaning. Contact parts are FDA Approved material and autoclavable. Auto rejection without machine stop. Laminar Air Flow Booth. Optional 100% IPC Tare-in, Tare-out weight check. Optional N2 flushing. Optional FDA 21 CFR Part 11. Optional Realtime Equipment OEE monitoring anytime, anywhere
Request for a quoteResults for
Handling - machines & equipment - Import exportNumber of results
105 ProductsCountries
Company type
Category