Hammer mills - Import export

This hammer mill grinds easily raw materials which are dry and lle dampens fine. For this reason it is used in food industry.The body is of steel and weld construction. The hammers are on the rotor which turn a mill. The rotormill turns in the strong ball thrust. The hammers are made of hardened steel.It is designed turn free.The sieve is on the hammer mill and it is changed easily without stopping the rotor. Motor is connected directly to the coupling. The body of hammer mill is mounted on the same chassis. Applications Fields ◾ Food industry ◾ Flour and semolina mills ◾ Feed mills ◾ Grain cleaning plants ◾ Corn processing plants ◾ Grain warehouses and silos ◾ Malt Factories

It is used to break protrusions in flour factories. Başak, kapçı etc. Used to break protrusions. Machine hammers and fan work coupled to the engine. The broken product is carried to the desired location by the fan. The crusher fan has a maximum sending height of 50 meters. The machine's feeder tank and the cyclone it will use are supplied with the machine. Body thickness is 4 mm, blades are made of special manufacturing steel. The machine is static balanced and operates silently.

The hammer mill is used to shred / crush the products in smaller pieces by the repeated blows of little hammers.

The CMB series hammer mills manufactured by our company are intended to crush and uniform fractions of dry bulk materials with moisture contents of up to 15% and destined for further technological processes. There is option to grind raw materials with higher moisture content, but this parameter has a very significant impact on the device performance. Depending on needs and purpose, CMB series hammer mills cay operate with capacity from 2 t/h to 10 t/h. The raw material is crushed by the impact of the hammers on the raw material and the raw material against the walls of the crushing chamber. The regularity and size of the resulting fraction is determined by the diameter of the holes in the screen used. We recommend collecting the crushed material from under the mill with pneumatic transport, as this enables the use of a pneumatic separator to sift out stones and other impurities that may cause explosions. The use of pneumatic transport will also increase the performance of the mill.

The hammer crusher uses the high rotation speed of rotating blades, which come in different sizes and shapes depending on the type of materials to be crushed. The size of the particles to be obtained can be controlled by changing the mesh of the sieve or by adjusting the speed of rotation of the blades. The advantage of the hammer mill is the low risk of mesh clogging due to the increased screening surface. The hammer crusher is robust, easy to maintain and transportable.

For recycling materials: plastics, straw, organic waste, aluminum, metal, WEEE scrap and sheet metal parts. Reliable separation of material fractions and environmentally sensitive components. Flow milling with impact crusher screens. Material is grinded into screen-sized particles.

SFSP Series Hammer Mill is mainly used for crushing granular materials such as corn, cereals, chaff, sunflower skin, etc.The machine has the characteristics of high output, stable work, safety and reliability, convenient loading and unloading, and easy operation. And it has strong adaptability to materials, and is currently the ideal high-efficiency crushing equipment, which is widely used in processing industries such as grain, feed, oil, food and chemical industry. The grinder applies direct-connect drive. The raw materials in the grinding room are broken into peaces by hammerhead striking and cutting. In addition, the attrition-of among materials and between material and sieve plate makes materials smashed more. Finely ground particles will pass through the sieve but the residues further are ground until them change enough to pass the sieve mesh. So, all the materials will be ground completely.

The HammerKnife Universal Mill is the combination between a Hammer Mill and an Universal Mill. As the FORPLEX FNG Mill it can be equipped with different grinding tools (hammer plate ou blade plate) which are adjustable in relation to the product to be ground. The FK Mill has the same advantages as the Universal Pin Mill FNG easy to use, easy to clean, easy to maintain, but also simplicity of changing the grinding tools or grids. Perfect for technical applications such as the grinding of natural ingredients (knife rotor designed for the crushing of plants), the FK mill was designed to meet the standards of the foodstuffs industry, fine chemicals industry, pharmaceuticals industry, nuclear industry or even for cosmetics. It can meet FDA, GMP or ANIA standards and criteria. With the robustness and strength of hammer crusher

The MA (or Hammer mill) is an impact grinder that crushes the input material between the hammer (or knife) plate and a stator fitted with a sieving screen perforated for the required particle size. It is generally used as a pregrinder positioned upstream of a grinding installation. The MA breaks up blocks of raw material into smaller particles capable of being treated by a mill for fine grinding.

Cleaning: Blower crushers remove foreign objects (stones, soil, metal fragments, etc.) from processed grain and other materials.) performs the cleaning process by breaking it down.

Description of Pine Wood Chips: Pine tree substrate materials have traditionally been produced from freshly harvested loblolly pine (Pinus taeda) trees that were chipped and then further processed in a hammer mill through screen sizes ranging from 3/16- to 3/8-inch. The resulting end product contained a mix of particle sizes and shapes, mostly being a fibrous-like material. It was the mix of fibrous particle sizes that gave the material water-holding properties similar to some peat and pine bark substrates. Our Wood chips are from Hardwood.

ERDWICH hammer mills are the answer to the challenge of selectively shredding hard and brittle materials. Then again, ERDWICH hammer mills also take the pelletisation of rubbery materials – as preparation for downstream separation systems – in their stride. A tough customer? Just so. ERDWICH hammer mills are especially suited to metal, electrical and electronic scrap or swarf from steel or aluminium – and many other materials besides. Simple adjustability during operation also makes short work of the pelletisation of non-ferrous metals. The final fragment size is variable and can be changed during operation. That’s also a great example of the product’s flexibility in catering to a wide range of applications. For the selective challenges in life. ERDWICH hammer mills.

Redler type chain conveyors are designed for horizontal and inclined (up to 60°) transport of bulk materials such as pellets, sawdust, wood dust, wood chips etc. They are used as devices for loading and unloading silos, hammer mills, pellet mills and simultaneously for combining separate sections of technological lines. The drive section is equipped as standard with NORD company gear motors, rotation monitoring sensors and inspection hatches with overflow sensors. Drive shaft, on which flywheel is installed, is mounted in high-quality self-aligning ball bearings (SKF or SNR) Thanks to its construction tensioning section ensures constant optimum chain tension. Intermediate sections have length of 2000 mm as standard, but if necessary, section with non-standard length can be made. Bottom of conveyor is lined with antistatic, wear-resistant material (polyethylene PE 1000), which ensures low noise level.

It is designed to get small size particles from granular products at flour and feed mills

The broad applications spectrum of SERVOLIFT milling and sieving equipment leads to flexible and user-friendly solutions in combination with handling systems. The areas of application stretch from controlled sieving in order to remove contamination from raw materials to fractionation, calibration to deagglomeration. Sieve mills, vibration sieve machines or inline sieve equipment in combination with mobile or stationary lifting systems provide a flexible, compact and easy-to-clean system. Size as needed Technical description Stainless steel or cGMP/FDA compliant designs Use as sieve mills (cone mills), hammer mills, oscillating sieve mills Various throughput depending upon the product and particle size Lifting height can be customized Broad control designs, from simple microcontrollers with digital displays to PLC controls Explosion-protected designs in adherence to Atex Zone 1/21 and 2/22.

The Hammer Mill, series PHMS is used for the economical preparation of wood chips from round wood, residual wood, waste wood or annual plants. The wood chips are of high quality and can be directly injected for combustion, or used as flakes for briquetting and pelletizing. Due to their quality they are also used for the production of core layer and surface layer material during the production of wood-based panels. Characteristics, Function Material is fed vertically from above The gravity sifter "Cleanomat" separates heavy contaminants from the feed material Flat steel hammers rotating at high speed split the feed material into flakes Stationary impact elements support the size reduction process and relieve the screens The perforation of the screens determines the size of the flakes The symmetrically designed machine housing allows operation of the mill in both directions Rotating flat steel hammers can swing back when large foreign objects penetrate into the grinding...

The Hammer Mill, series PHMS is used for the economical preparation of wood chips from round wood, residual wood, waste wood or annual plants. The wood chips are of high quality and can be directly injected for combustion, or used as flakes for briquetting and pelletizing. Due to their quality they are also used for the production of core layer and surface layer material during the production of wood-based panels. Characteristics, Function Material is fed vertically from above The gravity sifter "Cleanomat" separates heavy contaminants from the feed material Flat steel hammers rotating at high speed split the feed material into flakes Stationary impact elements support the size reduction process and relieve the screens The perforation of the screens determines the size of the flakes The symmetrically designed machine housing allows operation of the mill in both directions Rotating flat steel hammers can swing back when large foreign objects penetrate into the grinding...

The Hammer Mill, series PHMS is used for the economical preparation of wood chips from round wood, residual wood, waste wood or annual plants. The wood chips are of high quality and can be directly injected for combustion, or used as flakes for briquetting and pelletizing. Due to their quality they are also used for the production of core layer and surface layer material during the production of wood-based panels. Characteristics, Function Material is fed vertically from above The gravity sifter "Cleanomat" separates heavy contaminants from the feed material Flat steel hammers rotating at high speed split the feed material into flakes Stationary impact elements support the size reduction process and relieve the screens The perforation of the screens determines the size of the flakes The symmetrically designed machine housing allows operation of the mill in both directions Rotating flat steel hammers can swing back when large foreign objects penetrate into the grinding...

Surging demand by the pelletizing industry has caused a shortage of available saw dust and shavings. Numerous industries, like wood–based panelboard producers and the power plants are forced to find alternative sources. Substitution of suitable replacements has become urgent to ensure a fibre supply and to prevent shortages. Wood chips are often the only available source. Because of increasing numbers of produc-tion lines for pellets and particleboard a shortage of small fibre, has resulted. The flake produced from wet wood chips by the optimally PHMC hammer mill, can be used as an additional source or a 100% substitute of saw dust. Advantages Processing of wet chips (moisture u > 100%) Flake preparation of chips to a coarse saw dust type material Ensure the fibre supply in existing processing lines High machine availability at lowest maintenance an labour costs Independence from saw dust supply Future-proof for the usage of different material types by simple adjustment of...

Correctly processed residual wood and waste wood constitute a valuable raw material. The Impact Hammer Mill, series PHPS converts pre-shredded residual wood and waste wood of any kind into valuable raw material for material and thermal recovery. Even contaminated materials can be processed. Heavy foreign objects in the feed material are separated and automatically discharged. Characteristics, Function Material feeding is vertically from above Heavy, rotating hammers break the material and throw it against the impact plates The wood is split along the grain and enclosed metal contaminants are set free, separated and discharged Further processing of the wood pieces is effected by stationary breaker and comb bars The end fineness is determined by the perforation of the integrated screen Split housing design allows hydraulic opening Sturdy disc rotor is stress-relieved Adjustable separation degree of the discharge chute for metal pieces Device for hydraulic hammer...

Surging demand by the pelletizing industry has caused a shortage of available saw dust and shavings. Numerous industries, like wood–based panelboard producers and the power plants are forced to find alternative sources. Substitution of suitable replacements has become urgent to ensure a fibre supply and to prevent shortages. Wood chips are often the only available source. Because of increasing numbers of produc-tion lines for pellets and particleboard a shortage of small fibre, has resulted. The flake produced from wet wood chips by the optimally PHMC hammer mill, can be used as an additional source or a 100% substitute of saw dust. Advantages Processing of wet chips (moisture u > 100%) Flake preparation of chips to a coarse saw dust type material Ensure the fibre supply in existing processing lines High machine availability at lowest maintenance an labour costs Independence from saw dust supply Future-proof for the usage of different material types by simple adjustment of...

Correctly processed residual wood and waste wood constitute a valuable raw material. The Impact Hammer Mill, series PHPS converts pre-shredded residual wood and waste wood of any kind into valuable raw material for material and thermal recovery. Even contaminated materials can be processed. Heavy foreign objects in the feed material are separated and automatically discharged. Characteristics, Function Material feeding is vertically from above Heavy, rotating hammers break the material and throw it against the impact plates The wood is split along the grain and enclosed metal contaminants are set free, separated and discharged Further processing of the wood pieces is effected by stationary breaker and comb bars The end fineness is determined by the perforation of the integrated screen Split housing design allows hydraulic opening Sturdy disc rotor is stress-relieved Adjustable separation degree of the discharge chute for metal pieces Device for hydraulic hammer...

The Impact Hammer Mill, series PHPH ''Grizzly®'' was developed for the economical size reduction of residual- and waste wood of any kind. Not only pre-broken waste wood but also non precut, long recycling wood can be introduced into the mill. The machine distinguishes itself by high throughput rates at low specific energy consumption, low operating costs as well as robust and durable design. Any wood prepared with the „Grizzly®“ is used as a high quality and uniform raw material for material and thermal recovery. Characteristics, Function Material is fed horizontally from the front Size reduction is performed by impact and breaking combs and breaking ledges arranged behind the rotor Collection device for larger foreign objects which can be hydraulically opened for emptying Robust, wear-resistant and multi-split housing which can be easily opened via a hydraulic system Machine parts in the size reduction area made from wear-resistant and durable materials Oscillating hammers...

The Impact Hammer Mill, series PHPH ''Grizzly®'' was developed for the economical size reduction of residual- and waste wood of any kind. Not only pre-broken waste wood but also non precut, long recycling wood can be introduced into the mill. The machine distinguishes itself by high throughput rates at low specific energy consumption, low operating costs as well as robust and durable design. Any wood prepared with the „Grizzly®“ is used as a high quality and uniform raw material for material and thermal recovery. Characteristics, Function Material is fed horizontally from the front Size reduction is performed by impact and breaking combs and breaking ledges arranged behind the rotor Collection device for larger foreign objects which can be hydraulically opened for emptying Robust, wear-resistant and multi-split housing which can be easily opened via a hydraulic system Machine parts in the size reduction area made from wear-resistant and durable materials Oscillating hammers...

The system hammer mill pneumatic system is designed to grind all dried vegetables, fruits and spices in a hygienic and high quality manner using a sieve and filter. The machines used in the system and all the parts that come into contact with the product in the machine content are produced in a hygienic and high quality manner by using 304 quality stainless steel. products that you can grind in this system (as dried products) You can micronize all dry products such as garlic, onion, parsley, mint, lemon, orange, tangerine, banana, ginger, turmeric, coriander, black pepper, etc.

The manufacturer of Spare parts for Metallurgical and Mining industries. Steel and iron casting parts, forging, CNC machining, welded steel parts. Some examples of our products: •Slag pots •Grate bars for Coke Plant, for Sintering machines •Blast furnace cooling plates, BF staves •Blast furnace charging device, large bell d5400, large-bell hopper d5400 •Moulds, metallurgical plates •Hot sinter screens •Converter vessels, helmet housing •Air and oxygen blast lances, tuyeres for blast furnaces •BOF oxygen lance tips •Bronze screw nuts, max diameter 0,88 m •Smoke exhausters rotors, rotors for gas blowers, hot blast fans •Machined products: wheel gears, ring gears, pinion shafts, crane wheels •Rollers for CCM •Сrusher wear parts •Cone-type crusher amours, max diameter 2,5 m •Gear rings, max diameter 8,2 m •Primary crusher wear plates, mill wear plates, bottom plates •Crusher hammers •Mill drums and shells, diameter 3,6 m х length 5,0 m

The manufacturer of Spare parts for Metallurgical and Mining industries. Steel and iron casting parts, forging, CNC machining, welded steel parts. Some examples of our products: •Slag pots •Grate bars for Coke Plant, for Sintering machines •Blast furnace cooling plates, BF staves •Blast furnace charging device, large bell d5400, large-bell hopper d5400 •Moulds, metallurgical plates •Hot sinter screens •Converter vessels, helmet housing •Air and oxygen blast lances, tuyeres for blast furnaces •BOF oxygen lance tips •Bronze screw nuts, max diameter 0,88 m •Smoke exhausters rotors, rotors for gas blowers, hot blast fans •Machined products: wheel gears, ring gears, pinion shafts, crane wheels •Rollers for CCM •Сrusher wear parts •Cone-type crusher amours, max diameter 2,5 m •Gear rings, max diameter 8,2 m •Primary crusher wear plates, mill wear plates, bottom plates •Crusher hammers •Mill drums and shells, diameter 3,6 m х length 5,0 m