Guide bushings - Import export

Selflubricating. Hardness 190220 HB. Note The guide bushes are radially and axially applicable. The bearing elements are maintenancefree and wearresistant. The graphite inserts provide lifelong lubrication. Preferably for travel speeds < 0.5 m/s. (Additional lubrication is recommended for extreme loading with a higher travel speeds). Temperature range Temporary temperature peaks up to ca. 200°C. Tolerances The bore for the bearings should correspond to ISO tolerance H7. The tolerance h6 to h7 is recommended for the shaft.

For electric cylinders ISO 15552 size 32 to 100 Selfcentering rod coupling without axial play adapted to positioning Principle of rod coupling with reduced axial play Rod coupling with adjustable axial playThe difference with the ISO 15552 pneumatic cylinder guide units is at the level of the cylinder rod coupling on these guides for electric cylinders, the selfaligning rod coupling has no axial play (or a reduced axial play) depending on the assembly carried out, these units without axial play are therefore suitable for positioning applications. For applications without positioning accuracy or with high radial loads in static, it’s possible to use the guide units for pneumatic cylinders with a guide on plain bearings, since the rod coupling has an axial play (<0,2 mm). Guides for nonISO actuators For electric actuators which are not ISO, we know how to adapt our guide units to most of the rod actuators on the market see Hguide for actuators.

We manufacture rough or fully machined guide bush in tin bronze

The IKO Linear Bushing is a highprecision linear motion rolling guide that performs endless linear motion in the axial direction while making rolling contact with the shaft. Cage, steel balls, and the like are built compactly in the external cylinder. Models are available in abundant sizes and can be selected according to the application. Since the steel balls are accurately guided by the cage, stable linear motion can be obtained with small frictional resistance. Simple Replacement for Rolling Guide With the shaft used as the raceway, guiding parts using conventional bushings can be changed to rolling guides without major design changes. Wide Variation For each dimensional series, standard, adjustable clearance, and open types are available with and without seals, which can be selected according to the application. Stainless Steel Stainless steel types are also available, with excellent corrosion resistance and ideal for use in clean rooms, such as in medical equipment

Exceptionally wearresistant Dimensionally stable even at high temperatures Electrically insulating Frequency neutral

Body and flange plate EN AW5754. Guide shafts steel Version Body, hardcoated Flange plates, anodised. Guide shaft, hardened. Note Maintenancefree pneumatic linear modules with two precision steel shafts and ball guide bushing with wipers. Double acting cylinder drive. All fastening threads have threaded inserts. The as accessory available shock absorbers and proximity switches can be integrated (no protruding edges). Positive fit construction for hundred per cent reproducibility. Combinations in all sizes and stroke variants are feasible without adapter plates. Repeat accuracies of ±0.01 mm are possible. Specified loads apply by centred carriages. On request Available with locking cartridge as stroke deviation safeguard. Accessory See table for shock absorber, proximitiy switch and plug connector.

This low cost tension/compression load cell is an especially robust component, which can be easily integrated in a girder assembly between two cables or chains for measuring force. The standard model comes with internal thread, allowing any adapter parts, for instance eye brackets, to be fitted in the axis of symmetry. Alternatively, the optionally available adapters with external thread can be used for quick and easy screw-fitting into a threaded hole made for the purpose. The radial connection cable is extremely flexible and designed for a wide range of motion. In order to achieve the greatest possible stability for such a small sensor, making it suitable not only for the laboratory but also for industrial use, all parts have been welded together including the cable guide bush in the sensor housing. burster TEDS with an electronic sensor datasheet or standardization of the output signal in the sensor connecting cable are offered as options

Inside the multi-component force transducer are two webs, each offset by 90°, each with a strain gage full bridge, which convert the radially acting X / Y forces on the guide bush into an electrical signal. Due to the sensor body made from a block with its special structure, the sensor has a very high degree of dimensional accuracy and low crosstalk between the two forces. Due to the special design, the sensor has excellent linearity properties and is designed for a long service life in dynamic applications. The two independent signal connections allow flexible adaptation and further processing. Features: — Measuring ranges: 0 ... 4448 N / 0 ... 2224 N (0 ... 1000 lbs / 0 ... 500 lbs); 0 ... 8896 N / 0 ... 4448 N (0 ... 2000 lbs / 0 ... 1000 lbs) — Further measuring ranges on request — Non-linearity < 0.1 % F.S. — Low cross talk < 0.75 % F.S. — High dimensional accuracy, because sensor is made from one part — Excellent price/performance ratio

The mold comprises two main parts: the injection mold (A plate) and the ejector mold (B plate), which are also known as moulder and mouldmaker. Plastic resin is introduced into the mold via a sprue or gate in the injection mold. The sprue bushing seals tightly against the nozzle of the injection barrel of the molding machine, allowing molten plastic to flow from the barrel into the mold, known as the cavity. The sprue bushing guides the molten plastic into the cavity impressions through channels on the A and B plates. These channels, called runners, enable the plastic to flow along them. The molten plastic moves through the runner and enters specialized gates, ultimately filling the cavity geometry to create the desired part.

Table for manual using or outside motorization Guided on ball bushings Guide tables without transmission These tables are used for manual movement or for external drives. The end plates are tapped in the center to optionally receive a hydraulic shock absorber or stroke adjustment. On request, a position clamping is available (option /BP0* on leadscrew tables). Range of linear tables with cylinder or screw transmission These tables exist, in the same dimensions, in different versions – suitable for pneumatic cylinder Type 307 – with trapezoidal screw for electric drive Type 308 – with ball screw for electric drive Type 308 – with trapezoidal screw for manual drive Type 309

For pneumatic cylinders ISO Ø16 and Ø25 Guided on ball bushings Adjustable mechanical stops Manipulator made with your components = competitiveness These linear units make it possible to carry out any translation requiring precision and rigidity, to move up to 15 kg on 1, 2 or 3 axes (handling, assembly, loading, transfer, packaging …). By adding a cylinder with sensors and flow limiters as well as hydraulic shock absorbers from the supplier of your choice, you get a complete module that generally meets the requirements of the panels of suppliers, at a very competitive price.

For pneumatic cylinders ISO Ø8 and Ø10 Guide on bronze bearings or ball bushings The smallest guide unit in the range It’s the smallest unit, suitable for ISO6432 Ø8 and Ø10 pneumatic cylinders, allowing an ISO cylinder to be kept for small guided cylinder applications. It has a long Ushape to remain compact and have a guide length comparable to an Hshape. For environments requiring an anticorrosion version, the steel parts can be supplied in stainless steel (rods, coupling, screws), the body and the front plate are remaining in anodized aluminum (suffix /AC after the reference). Any special stroke is possible, with a maxi stroke of 200 mm.

Hguide unit for pneumatic cylinders ISO Ø25 to Ø125 Sturdy guide on ball bushings or bronze bearings Protected by wipers seals Sturdy Hguide This Strengthened Series has bigger guide rods than the Classic series and a thicker front plate for longer centering of the rods to increase torsion strength the plate / rods connection is generally the weak point of the Classic series when offcentered forces or loads are applied. Guide unit for Ø125 cylinder Adapted to the ISO6432 (Ø25) and ISO15552 (Ø32 to 125) cylinders, we can also adapt other types of pneumatic cylinders or electric actuators. Sturdy guide on plain bearing or ball bearing ? The plain bearing version is recommended for static radial loads, short strokes, dusty environments, it’s also the more economical version. The ball bushings version is recommended for precision (no radial play), high loads at horizontal, long strokes and offcentered loads. For critical applications, we propose Heavy series.

H guide unit for pneumatic cylinders ISO Ø12 to Ø100 Long guide on ball bushings or bronze bearings Protected by wipers seals H guide unit according ISO standard This Classic series of linear guide unit is the most common on the market. It ensure the guiding and antirotation of the payload, the floating coupling protects the rod of the cylinder from any mechanical stress. Adapted to the ISO6432 (Ø12 to 25) and ISO15552 (Ø32 to 100) cylinders, we can also adapt other types of pneumatic cylinders or electric actuators. Guide unit on plain bearing or ball bearing The plain bearings version is recommended for static radial loads, short strokes, dusty environments, it’s the more economical version. The ball bushings version is recommended for precision (no radial play), high loads at horizontal, long strokes and offcentering loads. For critical applications, we propose Strengthened and Heavy series and for simple antirotations, you can opt for Useries, Classic or Light.

Very compact and economical linear guide unit for ISO 21287 cylinder Ø25 to 50 (cylinder not supplied). Access to the lateral sensor grooves of the cylinder. Short guide on bronze bearings, ball bushings or polymer bearings. Ideal for compact guided cylinder applications while retaining an ISO cylinder. 2 ranges of linear guide units for ISO 21287 cylinder Depending on the stroke and the lateral forces, 2 ranges are available to guide the rod of ISO 21287 cylinders. . 34*EC series is the most compact version, with a rigid connection of the cylinder rod directly screwed into the front plate. This model is therefore limited to cylinders with stroke up to 50 mm. . 34*EF series has a floating rod coupling between the cylinder rod and the front plate. This model can receive cylinders with a longer stroke (100 mm maximum recommended). ISO 21287 cylinder with guide unit or compact guided cylinder ? It’s more advantageous to use an ISO 21287 cylinder and a 34*EC series guide unit

These bearing blocks permits to realize linear tables with 2 guide rods. Guided by 4 ball bushings and protected by 4 wiper seals. Quadruple bearings or bearing blocks These bearing blocks (or quadruple bearings blocks) permits to realize linear tables with 2 guide rods. Guided on 4 ball bushings and protected by 4 wiper seals. The housing is in anodized aluminium. In option, for dusty environment additionnals wipers in nitrile (/RNI) or polyurethane (/RPU). With 2 guide rods in hardened steel, you can easily make a precision linear table that will withstand significant torques and loads (according to the length of the rods). These blocks are interchangeable with the bodies of Type 306 linear tables, Type 309 trapezoidal screw tables, Type 308 ball screw tables and Type 307 pneumatic cylinder tables. They can therefore be the basis for a special execution of these products.

Compact and economical linear guide unit for ISO 15552 cylinder Ø32 to 50. Short guide on bronze bearings, ball bushings or polymer bearings. Competitiveness of guide units for ISO 15552 cylinders This range is very competitive since it is 25% less expensive than a HGuide Classic Series 20% less expensive than a UGuide Classic Series 10% less expensive than a UGuide Light Series (comparison made on size 4 – for cylinder Ø32) Area of application of compact guide units These compact guides being available in ball bushings whereas all the Uguide units are generally available in plain bearings only, they are particularly interesting for simple applications at high speed like in packaging machines. It will also be used in tight spaces, but for short strokes (<100 mm), it may be advisable to use a compact cylinder ISO 21287 with the guides

Table for pneumatic cylinders ISO Ø16 to Ø40 Guided on ball bushings Protected by wipers seals More rigid than a H guide unit These tables maintaining the same quality of guidance and rigidity throughout the stroke. For a offcentered payload in vertical, these tables allow to be more rigid than a guide unit in H. Hydraulic shock absorber on this table A hydraulic shock absorber may be placed in opposition to the pneumatic cylinder to dampen, for example, the descent and/or limit the stroke at the output of the cylinder rod. The retracting stroke can be adjusted by the floating rod coupling. Use in harsh environment For dusty environments, additional nitrile or polyurethane scrapers can be added in front of the ball bushings. An anticorrosion version can be proposed with the rods, the coupling and the screws in stainless steel (the carriage and the plates remain in anodized aluminum). It’s possible to make these tables with plain bearings (bronze or polymer) on request.

Convenient tool to fasten rivets, type 093. By using this tool the pin of the push rivet is mounted very reliably which speeds up the assembly time and avoids product failure. G = dimension G from series 093 Application: Attach the guide bushing on the rivet pin. Push the tool through completely. Thereby the pin is driven into the rivet.

The lifting column for industrial and assembly tables The lifting column SQ consists of a colorless anodized aluminium profile with a cross-section 45x45 mm. The stainless steel tube is guided in a plastic bushing and is moved by a spindle drive. Up to four lifting columns can be connected to a control box and operated synchronously. There are T-slots on 2 sides of the leg (width 8mm). These allow the mounting of crossbars and attachments along the entire length of the column. The following accessories are available: Crossbars in various lengths Table feet with adjusting screws Base plates

Lubricating and assembly paste, free of heavy metals with white solids protecting against tribo-corrosion. Due to the latest additive technologies it protects very well against wear and corrosion in guides, joints, bolts, bushings, cams and hinges, that are subject to high loads.

Right-hand cutting reamers with adjustable blades and with extra long cylindrical shank with square. Cutting edges with the unique Hunger special grinding (progressively increasing clearance angle) ensure a soft and smooth cut. A guide bush, which can be supplied in addition to each reamer size and which is pressed against the valve seat during reaming, facilitates handling and enables optimum accuracy. (see leaflet) The blades of the reamer are made of special steel, which is characterized by particularly good edge retention. In the "hard chrome" version, the blades are also hard chrome-plated. The hard chrome layer is characterized by high hardness and low coefficient of friction. Reamers of the "hard chrome" version are therefore particularly suitable for reaming materials with a high wear effect and materials that tend to stick and form built-up edges.