Results for
NORELEM FRANCE
France
Individual filled gas springs are excluded from replacement. Gas springs are maintenance-free, self-contained systems that are filled with nitrogen under high pressure. For end-of-travel damping and lubrication, a defined amount of oil is also contained inside. The gas springs contain a nonreturn valve in a threaded pin on the pressurised pipe, which allows the pushing force to be lowered at a later time. Gas pressure springs in the sizes 04/12 and 06/15 must be stored and installed with the piston rod extending downwards. As of size 08/19, storage and installation in any orientation is possible. Keep in mind, however, that end-of-travel damping is effective only when the piston rod extends downwards. As a consequence of the physical properties when filling a gas spring, a tolerance range of ±5 % results for the rated pushing force. Gas springs are filled with nitrogen under high pressure and under no circumstances should they be opened or overloaded.
Request for a quoteTEMAS GROUP EXPORT PARTNERS
Turkey
ALFAMAK is one of Turkey's leading gas spring manufacturers. Established in 2003, our company has been operating in the industry for 19 years and has gained a reputation for success. Gas spring is a new technology which comes instead of standard steel or polyurethane springs. A gas spring has a container of compressed Nitrogen gas with Piston Rod , Bush, Rod Rings, Valve etc. The Gas Springs are used in Cold Stamping industry to form, cut and fix the sheet metal inside the die. Many auxiliary materials are used for different purposes in the gas spring. Rod wiper, rod guide and rod seal are used on the inner surface of the bush. The purpose of the rod wiper is to prevent the oil and chips in the die from entering the gas spring. The rod guide is used to carry the load in case of axial force on the rod during use. The most important auxiliary material for sealing is rod/piston seal. It directly affects the performance of the product by keeping the gas in the gas spring.
Request for a quoteACE STOSSDÄMPFER GMBH
Germany
Valve Technology, Stainless Steel Traction force range max. 1,200 N Stroke 50 mm Brilliant performance when things become tight: For specific use e.g. in tough surroundings or small spaces, the broad spectrum of ACE industrial pull type gas springs made of stainless steel with body diameters from 15 to 40 mm supplements the comprehensive programme of the ACE industrial pull type gas springs with valves. This high quality design is rust free and is more robust against environmental impact compared with standard gas pull type springs. These stainless steel gas springs are also optically appealing, very durable and available, upon request, in many stroke lengths and are also possible in many extension forces in combination with the suitable stainless steel accessories.
Request for a quoteACE STOSSDÄMPFER GMBH
Germany
Valve Technology, Stainless Steel Traction force range max. 300 N Stroke 30 mm Brilliant performance when things become tight: For specific use e.g. in tough surroundings or small spaces, the broad spectrum of ACE industrial pull type gas springs made of stainless steel with body diameters from 15 to 40 mm supplements the comprehensive programme of the ACE industrial pull type gas springs with valves. This high quality design is rust free and is more robust against environmental impact compared with standard gas pull type springs. These stainless steel gas springs are also optically appealing, very durable and available, upon request, in many stroke lengths and are also possible in many extension forces in combination with the suitable stainless steel accessories.
Request for a quoteACE STOSSDÄMPFER GMBH
Germany
Valve Technology, Stainless Steel Traction force range max. 150 N Stroke 20 mm Brilliant performance when things become tight: For specific use e.g. in tough surroundings or small spaces, the broad spectrum of ACE industrial pull type gas springs made of stainless steel with body diameters from 15 to 40 mm supplements the comprehensive programme of the ACE industrial pull type gas springs with valves. This high quality design is rust free and is more robust against environmental impact compared with standard gas pull type springs. These stainless steel gas springs are also optically appealing, very durable and available, upon request, in many stroke lengths and are also possible in many extension forces in combination with the suitable stainless steel accessories.
Request for a quoteACE STOSSDÄMPFER GMBH
Germany
Valve Technology Traction force range max. 1,200 N Stroke 30 mm The solution to a lack of space: If standard push type gas springs cannot be used due to a lack of space, ACES' industrial pull type gas springs come into their own. They work in the opposite way to standard push type gas springs. The piston rod is retracted when the cylinder is unloaded. The gas pressure in the cylinder draws the piston rod in. ACE pull type gas springs offer the maximum service life thanks to the solid chrome-plated piston rod and an integrated sliding bearing. The maintenance-free and ready-to-install products are available in body diameters of 15 to 40 mm as well as forces from 40 to 5,000 N and are available from stock with valve and large selection of accessories. The traction force can be subsequently adjusted using the valve.
Request for a quoteACE STOSSDÄMPFER GMBH
Germany
Valve Technology Traction force range max. 300 N Stroke 30 mm The solution to a lack of space: If standard push type gas springs cannot be used due to a lack of space, ACES' industrial pull type gas springs come into their own. They work in the opposite way to standard push type gas springs. The piston rod is retracted when the cylinder is unloaded. The gas pressure in the cylinder draws the piston rod in. ACE pull type gas springs offer the maximum service life thanks to the solid chrome-plated piston rod and an integrated sliding bearing. The maintenance-free and ready-to-install products are available in body diameters of 15 to 40 mm as well as forces from 40 to 5,000 N and are available from stock with valve and large selection of accessories. The traction force can be subsequently adjusted using the valve.
Request for a quoteACE STOSSDÄMPFER GMBH
Germany
Valve Technology Traction force range max. 150 N Stroke 20 mm The solution to a lack of space: If standard push type gas springs cannot be used due to a lack of space, ACES' industrial pull type gas springs come into their own. They work in the opposite way to standard push type gas springs. The piston rod is retracted when the cylinder is unloaded. The gas pressure in the cylinder draws the piston rod in. ACE pull type gas springs offer the maximum service life thanks to the solid chrome-plated piston rod and an integrated sliding bearing. The maintenance-free and ready-to-install products are available in body diameters of 15 to 40 mm as well as forces from 40 to 5,000 N and are available from stock with valve and large selection of accessories. The traction force can be subsequently adjusted using the valve.
Request for a quoteACE STOSSDÄMPFER GMBH
Germany
Valve Technology Force range max. 5,000 N Stroke - mm Cover two differing force ranges: Tandem push type gas springs by ACE are maintenance-free and ready-to-install with two pressure tubes with different extension forces and progression curves. With this type of gas spring you cover the different force ranges between the start and end of an application. These force ranges are adjusted and compliment each other, designed individually for the relevant application by the free of charge ACE calculation service, then are specifically manufactured adjusted precisely to the required dynamics of the application. The customer specific systems, for which there are many fitting parts, are specifically suitable for heavy loads with large opening angle and can also be delivered in stainless steel versions.
Request for a quoteACE STOSSDÄMPFER GMBH
Germany
Valve Technology, Stainless Steel Force range max. 180 N Stroke 20 mm Protection against corrosion and superior optics for even more sophisticated requirements: Based on ACE's industrial gas push type springs GS-8 to 40 made of steel, these models combine all advantages of stainless steel: they look great and are rust free. They are filled with food-grade oil as standard, which conforms to the requirements of FDA 21 CFR 178.3570. These ACE gas push type springs do not only look good, they also are available in various stroke lengths and possible extension forces. A comprehensive range of accessories in stainless steel guarantees easy assembly and a broad range of uses.
Request for a quoteACE STOSSDÄMPFER GMBH
Germany
Valve Technology, Stainless Steel Force range max. 100 N Stroke 20 mm Protection against corrosion and superior optics for even more sophisticated requirements: Based on ACE's industrial gas push type springs GS-8 to 40 made of steel, these models combine all advantages of stainless steel: they look great and are rust free. They are filled with food-grade oil as standard, which conforms to the requirements of FDA 21 CFR 178.3570. These ACE gas push type springs do not only look good, they also are available in various stroke lengths and possible extension forces. A comprehensive range of accessories in stainless steel guarantees easy assembly and a broad range of uses.
Request for a quoteACE STOSSDÄMPFER GMBH
Germany
Valve Technology, Stainless Steel Force range max. 100 N Stroke 20 mm Protection against corrosion and superior optics for even more sophisticated requirements: Based on ACE's industrial gas push type springs GS-8 to 40 made of steel, these models combine all advantages of stainless steel: they look great and are rust free. They are filled with food-grade oil as standard, which conforms to the requirements of FDA 21 CFR 178.3570. These ACE gas push type springs do not only look good, they also are available in various stroke lengths and possible extension forces. A comprehensive range of accessories in stainless steel guarantees easy assembly and a broad range of uses.
Request for a quoteACE STOSSDÄMPFER GMBH
Germany
Valve Technology Force range max. 180 N Stroke 20 mm Universal and tailor made: ACE industrial gas push type springs of the NEWTONLINE family offer perfect support of muscle power with forces from 10 to 13,000 N with body diameter of 8 to 70 mm. With their high quality features the NEWTONLINE gas springs form the industry standard. These durable and sealed systems are ready for installation, maintenance-free and filled with pressurised nitrogen gas. They are supplied filled according to individual customer pressure requirements and maybe adjusted later by use of the inbuilt valve. The free of charge ACE calculation service designs the gas springs with mounting points specifically for the particular application. A variety of additional components makes assembly even easier and allows universal application of the gas springs.
Request for a quoteACE STOSSDÄMPFER GMBH
Germany
Valve Technology Force range max. 100 N Stroke 20 mm Universal and tailor made: ACE industrial gas push type springs of the NEWTONLINE family offer perfect support of muscle power with forces from 10 to 13,000 N with body diameter of 8 to 70 mm. With their high quality features the NEWTONLINE gas springs form the industry standard. These durable and sealed systems are ready for installation, maintenance-free and filled with pressurised nitrogen gas. They are supplied filled according to individual customer pressure requirements and maybe adjusted later by use of the inbuilt valve. The free of charge ACE calculation service designs the gas springs with mounting points specifically for the particular application. A variety of additional components makes assembly even easier and allows universal application of the gas springs.
Request for a quoteACE STOSSDÄMPFER GMBH
Germany
Valve Technology Force range max. 100 N Stroke 20 mm Universal and tailor made: ACE industrial gas push type springs of the NEWTONLINE family offer perfect support of muscle power with forces from 10 to 13,000 N with body diameter of 8 to 70 mm. With their high quality features the NEWTONLINE gas springs form the industry standard. These durable and sealed systems are ready for installation, maintenance-free and filled with pressurised nitrogen gas. They are supplied filled according to individual customer pressure requirements and maybe adjusted later by use of the inbuilt valve. The free of charge ACE calculation service designs the gas springs with mounting points specifically for the particular application. A variety of additional components makes assembly even easier and allows universal application of the gas springs.
Request for a quoteLESJÖFORS INDUSTRIAL SPRINGS & PRESSINGS GMBH
Germany
Lockable gas springs are commonly used in applications requiring the ability to lock out the stroke in a desired position without the need for external locking mechanisms. This is achieved by a unique piston design that separates the gas and oil chambers of the spring
Request for a quoteLESJÖFORS INDUSTRIAL SPRINGS & PRESSINGS GMBH
Germany
Modern manufacturing faclilities using the latest in design and production technology ensure consistent, high quality, long life products that are competitive priced.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
MING XIAO MANUFACTURING CO., LTD
China
Ming Xiao Manufacturing Co., Ltd appoint Ningbo Cospl Pneumatic & Hydraulic Components Co.,Ltd produce our Gas Springs products, Cospl is a professional industrial gas springs manufacturer & supplier from China. we are specialize in manufacturing various of nitrogen filled gas spring or call it gas struts,hydraulic Dampers, Shock Absorbers. Our main products include: Compression Gas Springs/ Gas Struts/ Gas lift springs/Lift supports, Locking Gas Springs,Traction gas spring/ Tension gas springs / draught gas spring, Hydraulic Dampers, Adjustable shock absorbers, etc. These gas springs & dampers can be widely applied in the fields such as aviation, automobiles, motorcycles trunk, machinery, medical exam & treatment table, fitness equipments ,furniture, doors, cabinets, etc. Gas springs are widely used in the automotive, aerospace, medical equipment, fitness equipment, furniture, machinery and other areas. for examples: door, cabinet, window, treatment table, exam bed, trunk lid...
Request for a quoteMING XIAO MANUFACTURING CO., LTD
China
Ming Xiao Manufacturing Co., Ltd appoint Ningbo Cospl Pneumatic & Hydraulic Components Co.,Ltd produce our Gas Springs products, Cospl is a professional industrial gas springs manufacturer & supplier from China. we are specialize in manufacturing various of nitrogen filled gas spring or call it gas struts,hydraulic Dampers, Shock Absorbers. Our main products include: Compression Gas Springs/ Gas Struts/ Gas lift springs/Lift supports, Locking Gas Springs,Traction gas spring/ Tension gas springs / draught gas spring, Hydraulic Dampers, Adjustable shock absorbers, etc. These gas springs & dampers can be widely applied in the fields such as aviation, automobiles, motorcycles trunk, machinery, medical exam & treatment table, fitness equipments ,furniture, doors, cabinets, etc. Gas springs are widely used in the automotive, aerospace, medical equipment, fitness equipment, furniture, machinery and other areas. for examples: door, cabinet, window, treatment table, exam bed, trunk lid...
Request for a quoteMING XIAO MANUFACTURING CO., LTD
China
Ming Xiao Manufacturing Co., Ltd appoint Ningbo Cospl Pneumatic & Hydraulic Components Co.,Ltd produce our Gas Springs products, Cospl is a professional industrial gas springs manufacturer & supplier from China. we are specialize in manufacturing various of nitrogen filled gas spring or call it gas struts,hydraulic Dampers, Shock Absorbers. Our main products include: Compression Gas Springs/ Gas Struts/ Gas lift springs/Lift supports, Locking Gas Springs,Traction gas spring/ Tension gas springs / draught gas spring, Hydraulic Dampers, Adjustable shock absorbers, etc. These gas springs & dampers can be widely applied in the fields such as aviation, automobiles, motorcycles trunk, machinery, medical exam & treatment table, fitness equipments ,furniture, doors, cabinets, etc. Gas springs are widely used in the automotive, aerospace, medical equipment, fitness equipment, furniture, machinery and other areas. for examples: door, cabinet, window, treatment table, exam bed, trunk lid...
Request for a quoteMING XIAO MANUFACTURING CO., LTD
China
China Winson Gas Spring specialize in OEM /ODM developing & manufacturing various of nitrogen filled gas spring or call it gas struts,hydraulic Dampers, Shock dampers for world customers. Our main products include: Compression Gas Springs/ Gas Struts/ Gas lift springs/Lift supports, Locking Gas Springs,Traction gas spring/ Tension gas springs / draught gas spring, Hydraulic Dampers, Adjustable shock absorbers, etc. These gas springs & dampers can be widely applied in the fields such as aviation, automobiles, motorcycles trunk, machinery, medical exam & treatment table, fitness equipments ,furniture, doors, cabinets, etc. Gas springs are widely used in the automotive, aerospace, medical equipment, fitness equipment, furniture, machinery and other areas. for examples: door, cabinet, window, treatment table, exam bed, trunk lid... sales@gasspringscn.com WhatsApp +86 13780014913
Request for a quoteIDEZ AUTO PARTS
Turkey
GAS SPRINGS FOR PASSENGER SEATS AND DRIVER SEATS BUS AND TRUCK SPARE PARTS ORIGINAL OR AFTERMARKET. ATEGO, AXOR, ACTROS, TRAVEGO, TOURISMO, SETRA, NEOPLAN, TOURLINER BUSES AND TRUCK SĞPARE PARTS.
Request for a quoteTGS GAS SPRINGS LTD. CO.
Turkey
Stainless Lift Series developed mainly for moisture resistance required applications. Besides, TGS offers this product series with alternative versions for extreme temprature conditions.
Request for a quoteTGS GAS SPRINGS LTD. CO.
Turkey
FEATURE : NOT ROTATING No swiveling of the loaded weight. Lifting Force : 300 daN (kg) Basic Application : Mayo Instrument Table (Instrument tables in operation rooms) Operator Seatin
Request for a quoteTGS GAS SPRINGS LTD. CO.
Turkey
The Hydraulic lift range is built to quality standards that ensure years of trouble free operation.
Request for a quoteTGS GAS SPRINGS LTD. CO.
Turkey
The position of the hydraulic lift can be changed by pumping the lever for an arc of approximately 45°. By releasing the applied force from the lever it returns by itself to its.
Request for a quoteTGS GAS SPRINGS LTD. CO.
Turkey
TGS offers T-DAMPER Series in order to provide solution for inconvenient lid applications which requires movement control during opening, closing, lifting or lowering. T-DAMPER | Motion Control Series also reduce acceleration and avoid hard stops in the end position.
Request for a quoteTGS GAS SPRINGS LTD. CO.
Turkey
T-STEP is a user friendly, easy to use telescopic positioning stay. TGS offers this stays in three versions (5 step, 6 step, 10 step) which presents to operate up to 135 KG applications. In order to open, extend the arm until it locks into the desired position. To close, fully extend T-STEP before returning it to the closed position.
Request for a quoteTGS GAS SPRINGS LTD. CO.
Turkey
Lift series gas springs are most popular member of TGS family for decades. Main function of this type is lifting or counterbalancing lids, hatches or similar applications.
Request for a quoteResults for
Gas springs - Import exportNumber of results
146 ProductsCountries
Company type
Category