Results for
FRIEDR. FREEK GMBH
Germany
Preformed silicone heaters are useful for diamters as small as 12 mm and up to 100 mm. Rounded silicone heaters are not possible with self-adhesive foil. Spiral Wrap Pre-Formed Silicone Rubber Heaters are suitable for tubes and flexible pipes and hoses with Ø 6,35 mm (1/4"). Spiral formed flex heaters can be used up to Ø 12 mm (the length of the stretchable silicone spiral wrap heater is reduced accordingly). The thickness of our spiral-wrapped silicone strip heaters is 2,2 mm. Also our gas and pump line heaters, most frequently used in the semi-conductor process, are shaped and pre-formed according to the object geometry to be heated. They are designed to regulate temperatures in order to prevent condensation in the line. Current applications here are Semi Conductors, Vacuum Chambers, Wafer Chucks, Valves, Exhaust & Pump Systems.
Request for a quoteBÜRKLE GMBH
Germany
The barrel pump's universal adapter fits onto container openings of 30 - 70 mm, closing tightly. The container screw joints can be screwed into the container with the 3/4" thread and lock nut. The gas-tight barrel pump enables odour-free transfer. During transfer with normal pumps, it is impossible to prevent vapours escaping into the atmosphere. The gas-shuttle method avoids this. Any vapours produced are returned from the container which is to be filled to the original container via the gas-shuttle pipe. The gas pipe and the liquid pipe are additionally provided with stopcocks. Gas-tight pumps are used for substances that have a strong smell such as ammonia.
Request for a quoteFRIEDR. FREEK GMBH
Germany
Freek pump and gas line heaters for trace heating are designed to regulate temperatures in order to prevent freezing or condensation in the line. As with all our heaters, these can be designed and produced to your bespoke specifications. A most frequent application for gas & pump line heaters the semi-conductor process in which gases such as Tetraethyl Orthosilicate (TEOS), Boron Trichloride (BCl3), Aluminium Chloride (AlCl3), Chlorine Triuoride (ClF3) and Dichlorosilane (DCS) condense at low temperatures. Should this occur, it could result in wafer defect. Gas and pump line heaters consistently heat the lines and provide a simple heating solution and prevent condensation build up. The optimum line temperature will vary depending on the process.
Request for a quoteBÜRKLE GMBH
Germany
Gas-tight barrel pump with flexible discharge hose for filling off into large canisters and containers. Convenient transfer because the canister can stay on the floor. The connection cone is held onto the container. The gas-tight barrel pump enables odour-free transfer. During transfer with normal pumps, it is impossible to prevent vapours escaping into the atmosphere. The gas-shuttle method avoids this. Any vapours produced are returned from the container which is to be filled to the original container via the gas-shuttle pipe. The gas pipe and the liquid pipe are additionally provided with stopcocks. Gas-tight pumps are used for substances that have a strong smell such as ammonia.
Request for a quoteMERECS ENGINEERING GMBH
Germany
Merecs develops individual test systems for heat pumps, gas, fluid and water systems. Our engineers & fitters for electronics, installation technology and mechanics build the systems completely from one source at our location in Steinfurt. The systems are then delivered and commissioned at home and abroad. Our range of products includes - Development test benches - Life time test benches - End-of-line test benches (production) - Retrofit of existing systems (software / hardware) - Climate & temperature test systems - Leakage test benches - Software development LabVIEW, TestStand, Python, C/C++ (Embedded), Microsoft PowerBI, SQL - Electronics development - Mechanical 3D CAD design
Request for a quoteLUTZ PUMPEN GMBH
Germany
The B80 KME series was developed as a wet-installed centrifugal immersion pump for stationary use in tanks and basins. The direct-coupled pump with plain bearings is suitable for pumping and circulating neutral and chemically aggressive liquids in the chemical industry and process engineering, in electroplating and surface technology, in washing systems and water treatment plants, for sump drainage in industrial and municipal waste disposal plants or as a circulation pump in gas scrubbers and heat exchangers. * with various plain bearing designs * available in immersion depths from 600 - 1500 mm Features & Advantages * Compact dimensions * Abrasion resistant material combinations possible * Extremely low-vibration and low-wear operation * All wetted parts made of corrosion resistant plastic * Self-centering alignment in the bearing shell
Request for a quoteFERPLAST SNC
Italy
VERTICAL VACUUM SEALING MACHINE FOR BAGS - ALSO WITH MAP GAS INLET The sealers mod. DZQ 600 LS/DZQ 800 LS are multifunctional machines suitable for sealing and vacuum packing large bags and sacks, also in MAP (with technical gas injection). The vacuum pump of 20 mc./h. it minimizes air intake times and the machines are equipped with valves for the injection of inert gas for packaging in a modified atmosphere. The double sealing bars with a width of 10 mm. and compressed air closure ensure perfect sealing on any type of material, even of high thickness. The bars are closed by means of a double button command (dual safety control). The sack support surface is adjustable. Thickness max. bag mm. 0.20 (0.8 total with bellows) By means of selectors and potentiometers it is possible to set the "sealing", "empty time" and "gas injection time" functions. The machine is equipped with two nozzles which, when the vacuum option is activated, descend into the bag and perform suction.
Request for a quoteBILLI DICHTUNGSTECHNIK GMBH
Germany
In order to be able to meet the individual requirements of our customers, we offer various types of spiral wound gaskets: For example, you can choose between standard versions with a smooth surface and various special models. All articles are based on a stainless steel strip and high-quality filling materials such as graphite and PTFE, which underlines the excellent quality standard. The spiral wound gaskets of billi are characterized by a constant elasticity during hot-cold cycles. Classical applications in the chemical industry include all types of gas lines, directional valves and pumps. Furthermore, spiral wound gaskets are the optimal solutions for pressure vessel openings in steam systems as well as low and high pressure in nuclear power plants. For the best possible functionality of spiral wound gaskets, the careful considered choice of model is of central importance: the versions with centering ring, for example, assures an ideal fit between the bolts.
Request for a quoteFERPLAST SNC
Italy
TABLETOP VACUUM MACHINE - 1 FRONT BAR LENGTH 450 mm Professional bench vacuum machines in stainless steel, which can be set from the panel with 10 customizable programs. Through the convenient display it is possible to view the various parameters of the vacuum. The display shows the need for oil change with a special message. An electronic sensor of last generation detects the degree of vacuum obtained inside the chamber. All FPMV models are endowed with a safety system against the risk of sealing bars overheating. Vacuum capacity is 99,9%. Available models: FPMV 45 1BF - 1 450 mm front bar - 20 mc/h vacuum pump - without gas FPMV 45 1BFG - 1 450 mm front bar - 20 mc/h vacuum pump - with gas Only when ordering is it possible to request the integrated printer for printing an adhesive label showing the packaging data.
Request for a quoteCLIXAR
Ukraine
The tightening seal Capseal is made of polyethylene and designed specifically for gas cylinders. These seals have a one-piece tightening-type case structure, which consists of a round bowl, a locking mechanism, and a tail part. The bowl covers the side of the valve to prevent the possibility of connecting a tube to it and pumping out the gas. The internal locking mechanism operates based on a three-leaf collet and is protected from external mechanical impacts. The ribbed tail ensures reliable fixation of the seal on the cylinder preventing reversal movement of the tail. Additional protection provided for Clixar tamper-evident seals is a special laser marking applied through the thickness of the surface. It cannot be erased, replaced, or counterfeited without leaving obvious visible marks. Using the same method, the customized number is applied to the Capseal bowl, thus eliminating the possibility of replacing the seal and providing a convenient accounting option.
Request for a quoteBOSCH INDUSTRIEKESSEL GMBH - INDUSTRIAL BOILERS
Germany
— For the extraction of the feed water/condensate — Consumes less power, more convenient to operate — Speed-controlled version for increased flue gas heat exchanger efficiency — Redundant pump for maximum reliability of supply — Preassembled for fast installation Highly efficient boiler systems with perfectly matched boiler house components ensure that low levels of energy consumption and emissions are achieved.
Request for a quoteBOSCH INDUSTRIEKESSEL GMBH - INDUSTRIAL BOILERS
Germany
— For continuous feed water control — Increased efficiency of flue gas heat exchangers — Fewer pump circuits — Constant boiler water level — Minimum flow rate for cooling the feed pump is assured Highly efficient boiler systems with perfectly matched boiler house components ensure that low levels of energy consumption and emissions are achieved.
Request for a quotePLASMA COMPANY LLC
Ukraine
A pump is a mechanical device for moving a fluid from a lower to a higher location, or from a lower to a higher pressure area. The fluid can be any type of liquid or gas, and pumps may be classified in many ways according to their purpose, specifications, environment, design, etc. Pumps are used in a wide range of industrial and residential applications. Pumping equipment is extremely diverse, varying in type, size, and materials of construction. Classifications and Types: Pumps may be classified on the basis of the applications they serve, the materials from which they are constructed, the liquids they handle, and even their orientation in space. All such classifications, however, are limited in scope and tend to substantially overlap each other. A more basic system of classification first defines the principle by which energy is added to the fluid, goes on to identify the means by which this principle is implemented, and finally delineates specific geometries.
Request for a quoteLEVTECH SERVICE & PRODUCTION SRL
Romania
This is a universal fuel pump remote control which controls 5 different fuel pump types. This product is designed for fuel service companies, it can substitute 5 remote controls by itself. With the DIP-Switches the user can easily switch to the desired pump type and control the pump just like with the original remote control. This gas pump remote control can handle five different types of fuel dispenser: • Tokheim WWCT, COCA • Satam • Wayne Dresser IGEM • Tatsuno Benc • Adast Features • High power infrared (up to 4 m working distance) • 5 in one remote controller • Durable case • Battery saver function • Indication LED
Request for a quoteEUROPE ZHAOHAN VACUUM PUMP CO., LTD
Hungary
Closed circulation vacuum system is consisted with liquid ring vacuum pump and compressor, liquid and gas separator tank, heat exchanger, instrument and valves, internal pipeline, and common base plate. The pumped gas enters the liquid ring vacuum pump/compressor from the pump inlet, after compressed by the liquid ring vacuum pump/compressor, the gas will enter to enter the gas-liquid separator together some of the working liquid. Inside the gas-liquid separator, the gas and liquid are separated, and the gas is discharged from the pump outlet, and the working fluid go from the heat exchanger and enter the liquid ring vacuum pump/compressor for recycling.
Request for a quoteEM-TECHNIK GMBH
Germany
The 7G injectors are pumps for pumping and mixing various media. The basic principle is simple: a gaseous media is used for the actuator; this media escapes at high pressure and high speed from a nozzle. During this process the media from the surrounding area is also drawn along and can be supplied to the downstream production process. Due to their design, the injectors do not need moving parts, as a result they have very low wear and are robust.
Request for a quoteLEISTRITZ PUMPEN GMBH
Germany
Global energy consumption is constantly rising. The raw material required for vehicle operation, energy production and other products is predominantly based on crude oil and natural gas. Screw pumps are often used in the production of these valuable commodities. For decades, Leistritz has been an expert partner for the oil and gas industry, whether for pumping tasks in crude oil production using multi-phase pumps, transfer and injection pumps or in the transportation of crude oil using booster or pipeline start-up pumps. Leistritz pumps are also used in refinery processes.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
NSGATE
Russia
Renewable energy sources like solar and wind are ideal for powering equipment in remote locations. These types of off-grid systems are commonly used to power equipment for a variety of different industrial applications. Common applications include lighting, wireless surveillance cameras, sensors, environmental monitors, traffic signals, oil/gas pipes network, pump stations, telecommunication equipment, and anything else that requires reliable power in a remote location. NSBox-SUN Outdoor Access Node is used to deploy protected autonomous or semi-autonomous outdoor applications in the area with no 24/7 electricity available and solar panels can be installed. Typical application for NSBox-SUN is wireless surveillance system that is powered from street lighting where AC power is available only at the night time. NSBox-SUN can be even used if there is no AC power at all if PDs connected to it have low power consumption that can be filled up with energy
Request for a quoteBLUESENS GAS SENSOR GMBH
Germany
The BCpreFerm is a whole gas analysis for scale-up processes. Made for the analysis of metabolic processes, the model is composed of up to 6 CO2- and O2-senors, a BACCom data multiplexer box, and the BlueVis-software for automatic data recording. Growth is controlled through a parallel analysis of CO2 and O2, a display of OTR, CTR and RQ, and through defined trial conditions. The system uses a modular design which enables connection to shake flasks, as well as to fermenters. It can also be attached to existing bioreactors. The use of additional gas coolers, lines, pumps and valves, and the complicated processing of gases is no longer necessary. The instrument can be used for cultivations in shake flasks and fermenters and further applications.
Request for a quoteHELANTEC GMBH
Germany
The GAS TESTER is our lowestprice entrylevel model for monitoring gas concentration. Naturally we have installed our proven analysis technology in this product as well. Features reliable concentration measurements compact and handy design easy operability argon and krypton use optional data storage Only a small quantity of gas is required. Sampling is executed with a special gas supply pump. The GAS TESTER is suitable for quality control of IG units with argon or krypton as the filling gas. If you desire to also analyse other gas types or gas mixtures, you should chose one of our other analysers.
Request for a quoteSCHÖNWOLF HAMBURG BY 7 SOLUTIONS GMBH
Germany
The gas detetctor pump for easy usage in difficult situations The manual Dräger Accuro is used for short time measurements of Dräger tubes. Often measurements take place in extreme situations, for example: ladders, shaft or under heavy respiratory protection. The gas detector pump Accuro is easy to operate with one hand The gas detector pump Accuro is easy to operate with one hand and enables reliable measurements at hardly accessible places. This pump is a bellow pump in which the air is sucked stroke wise through the tubes. The body of the pump consists of a bellow, which is pressed together completely for measurements. After release of bellows, the sucking drains automatically and the relevant measured gas is sucked by the insert tube. The sucking process is finished when the body of the pump is completely open again. The end of stoke can be read by a pressure controlled display in pump head of Dräger Accuro. Data sheet
Request for a quoteSCHÖNWOLF HAMBURG BY 7 SOLUTIONS GMBH
Germany
The compact and reliable gas detector GasAlertMax XT of the company BW-Technologies provides effective protection against 4 different dangerous gases at the same time. Due to simple one-button operation the device is perfect suitable for a broaden range of industrial applications. Moreover, thanks to intelligent, newest integrated pump technology long distance samples in containers or enclosed rooms are possible. Features of GasAlertMaxXT II: Permanent display up to 4 gases concentrates in real-time at once Self-test of all functions for sensors, battery, electronic and acoustic / visual alarm Impact- and water-resistant Bright, wide-angle flashing alarm display With integrated vibration alarm, ideal for noisy environment Free adjustable alarm points Integrated gas sampling pump with reliable membrane technology Setting of various languages (German, English, French, Spanish, Portuguese) Technical data Dimensions (cm): 13.1 x 7.0 x 5.2 Weight (g): 316 Application temperature:...
Request for a quoteSCHÖNWOLF HAMBURG BY 7 SOLUTIONS GMBH
Germany
The robust and reliable gas detector Triple Plus-IR of Crowcon provides effective protection against up to four gases of various dangerous gases at the same time. With the help of modern pump technology and hydrocarbon- infrared- recognition for measurement of hydrocarbons (in the unit measurement % LEL and vol.%), it is especially adventurous for monitoring of inert atmospheres (e.g. tank cleaning) Features of Triple Plus-IR Permanent display up to 4 gases in real time at the same time. Shock- and waterproof Self test of all functions of sensor, battery, electronic and acoustic/optical alarm Bright, wide-angle flashing alarm display Free adjustable alarm points Integrated gas probe pump with reliable membrane technology PC- interface for configuration of device Technical data of Triple Plus-IR Size (cm): 11,8 x 16,7 x 7,3) Weight (g): 900 Application temperature: -20 up to +50°C Alarm: optical, vibration and acoustic (95dB) low, high, Stel, MAK, OL (exceedance of measuring...
Request for a quoteSCHÖNWOLF HAMBURG BY 7 SOLUTIONS GMBH
Germany
With the robust and reliable gas detector GasAlertMicro5 of BW-Technologies, it is possible to measure and to control up to five dangerous gases at the same time. Thanks to intelligent, integrated pump technology (optional) long distance samples in containers or enclosed rooms are possible, and is suitable for a broaden range of industrial applications. GasAlertMicro5 is available as standard version for toxic and flammable gases, as well as PID version for detection of volatile organic compound or as IR-version for detection of carbon monoxide. Features of GasAlertMicro5 Permanent display up to 5 gases concentrates in real-time at once Impact- and water-resistant Self-test of all functions for sensors, battery, electronic and acoustic / visual alarm Bright, wide-angle flashing alarm display With integrated vibration alarm, ideal for noisy environment Free adjustable alarm points Integrated gas sampling pump with reliable membrane technology Setting of various languages...
Request for a quoteLLC SMARTSERVICE
Russia
Repair kit for pipelines with all accessories for mounting the sleeve and repairing the pipe. The sleeve fitting is manufactured of solid-woven reinforced fiberglass, made in a unique way, which gives a number of advantages compared to standard fittings: fire resistance, high pressure, corrosion resistance, from 30 years of operation. Scope of fitting application - pipelines, including non-metallic, underground, ground, aboveground and underwater versions, with a diameter of 50 to 1200 mm with a maximum internal working pressure of up to 20 Mpa (200 Bar) for pumping gas, oil, petroleum products and other gaseous and liquid media, operated at temperatures from minus 60°C to plus 180°C. Fittings are used for permanent (major) repairs of through and part-through flaws of pipelines with a maximum internal pressure of not more than 12 MPa. Fittings are used for sealing through flaws (fistulas), for integral repair of pipelines with a pressure of up to 20 MPa. Major repairs.
Request for a quoteLLC SMARTSERVICE
Russia
Repair kit for pipelines with all accessories for mounting the sleeve and repairing the pipe. The sleeve fitting is manufactured of solid-woven reinforced fiberglass, made in a unique way, which gives a number of advantages compared to standard fittings: fire resistance, high pressure, corrosion resistance, from 30 years of operation. Scope of fitting application - pipelines, including non-metallic, underground, ground, aboveground and underwater versions, with a diameter of 50 to 1200 mm with a maximum internal working pressure of up to 20 Mpa (200 Bar) for pumping gas, oil, petroleum products and other gaseous and liquid media, operated at temperatures from minus 60°C to plus 180°C. Fittings are used for permanent (major) repairs of through and part-through flaws of pipelines with a maximum internal pressure of not more than 12 MPa. Fittings are used for sealing through flaws (fistulas), for integral repair of pipelines with a pressure of up to 20 MPa. Major repairs.
Request for a quoteLLC SMARTSERVICE
Russia
Repair kit for pipelines with all accessories for mounting the sleeve and repairing the pipe. The sleeve fitting is manufactured of solid-woven reinforced fiberglass, made in a unique way, which gives a number of advantages compared to standard fittings: fire resistance, high pressure, corrosion resistance, from 30 years of operation. Scope of fitting application - pipelines, including non-metallic, underground, ground, aboveground and underwater versions, with a diameter of 50 to 1200 mm with a maximum internal working pressure of up to 20 Mpa (200 Bar) for pumping gas, oil, petroleum products and other gaseous and liquid media, operated at temperatures from minus 60°C to plus 180°C. Fittings are used for permanent (major) repairs of through and part-through flaws of pipelines with a maximum internal pressure of not more than 12 MPa. Fittings are used for sealing through flaws (fistulas), for integral repair of pipelines with a pressure of up to 20 MPa. Major repairs.
Request for a quoteLLC SMARTSERVICE
Russia
Repair kit for pipelines with all accessories for mounting the sleeve and repairing the pipe. The sleeve fitting is manufactured of solid-woven reinforced fiberglass, made in a unique way, which gives a number of advantages compared to standard fittings: fire resistance, high pressure, corrosion resistance, from 30 years of operation. Scope of fitting application - pipelines, including non-metallic, underground, ground, aboveground and underwater versions, with a diameter of 50 to 1200 mm with a maximum internal working pressure of up to 20 Mpa (200 Bar) for pumping gas, oil, petroleum products and other gaseous and liquid media, operated at temperatures from minus 60°C to plus 180°C. Fittings are used for permanent (major) repairs of through and part-through flaws of pipelines with a maximum internal pressure of not more than 12 MPa. Fittings are used for sealing through flaws (fistulas), for integral repair of pipelines with a pressure of up to 20 MPa. Major repairs.
Request for a quoteFEDERAL-MOGUL DEVA GMBH
Germany
Where to use deva.metal ® deva.metal ® is a self-lubricating bearing material manufactured by advanced powder metallurgy. It is fully compacted, unlike oil-impregnated porous bronze materials that are weak by comparison. deva.metal ® is provided with an evenly distributed solid lubricant throughout its metallic matrix. deva.metal ®, which is suitable for dry running at slow sliding speeds and high loads: has high resistance to temperature and corrosion. will tolerate contamination and edge pressures. can be easily machined if required. Applications Iron foundries and steel works, furnace construction, fans, foundry machinery, waste water cleaning plants, water, steam and gas turbines, pumps and compressors, food and beverage industry machinery, packing machinery, construction equipment, mechanical handling equipment and many more. Structure 1. Bronze, iron or nickel matrix 2. Solid lubricant (Graphite, WS 2 a.o.)
Request for a quoteResults for
Gas pumps - Import exportNumber of results
38 ProductsCountries
Company type
Category