Results for
LIPP GMBH BEHÄLTER UND SYSTEMLÖSUNGEN
Germany
Stainless steel containers with digester chamber volumes from 100 to 10,000 m3 Gastight cover, with or without a gas accumulator Individually customisable Durable due to high quality materials Ideal for the collection of residual gases or for improving efficiency Homogenisation device to suit the task in each case Integrated gas accumulator with optional wind, weather and UV radiation protection
Request for a quoteTROTEC GMBH
Germany
OIL HEATER FAN IDE 20Flexible all-rounder for a wide range of heating applications: the ultramobile oil fan heater IDE 20 Hot air in a trice at a low price: The smallest oil heater fan of the IDE series from Trotec comes up trumps if you are looking for a compact and low-priced yet reliable oil heating solution for flexible heating applications. Whether in workshops, warehouses, production zones or on construction sites – with a heating capacity of 20 kW the IDE 20 confidently generates clean and dry hot air in quantities of up to 600 m³/h. Even longer outdoor applications present no obstacle to the oil heater fan IDE 20, because it is provided with a durable housing made of doubly coated material, borne by a smooth-running carriage construction with cable holders and installed fuel tank. When employing the optionally available flue gas discharge, this heating device can also be flexibly used for the fully automatic heating of closed rooms.
Request for a quoteLIPP GMBH BEHÄLTER UND SYSTEMLÖSUNGEN
Germany
The range of material grades available and individually customisable pumping and stirring technologies provide optimum boundary conditions for any substrate composition. Pre or post treatment of the substrate can be carried out by installing additional tanks (e.g. hydrolysis, sugar beet silos and post digesters). With Lipp tanks for biogas plants which are built and used all over the world, you will benefit from 50 years of experience in plant and tank construction. They are constructed using VERINOX stainless steel which is characterised by maximum leak tightness and high quality. Stainless steel digester with a digester chamber volume of 100 to 10,000 m3 Wide range of tank roofs With or without optional gas accumulator Flexible stirring technology which can be adapted to the digester and substrate Smooth internal walls and uniform temperature distribution
Request for a quoteTROTEC GMBH
Germany
OIL HEATER FAN IDE 50The indirectly fired oil fan heater IDE 50 ensures clean, dry hot air Indirectly fired air heaters such as the oil heater fan IDE 50 are an ideal solution to provide large amounts of clean and dry hot air, as it is required for the heating of construction sites, marquees, exhibition halls, workshops or stables. Longer outdoor applications are no problem for the oil heater fan IDE 50, because it is provided with a durable housing made of doubly coated material, borne by a smooth-running carriage construction with cable holders and installed fuel tank. When employing the optionally available flue gas discharge, this heating device can also be flexibly used for the fully automatic heating of closed rooms.
Request for a quoteENVEA
France
MCERTS QAL1 approved, stand alone or multisensor particulate CEM providing high quality emission measurement for low dust concentrations from dry industrial processes. • ProScatter™ backscatter sensor technology with superior minimum detection <1mg/m³ • certified to 15 mg/m³ for processes with low typical emissions limits • manual and remote zero and span checks available to ensure optimal instrument performance and to comply with EN 13284/QAL1 • automatic functionality check • purge flow fail sensor option with inbuilt automatic optical shield activation • flue gas blocker option to protect plant engineers from harmful flue gases during maintenance
Request for a quoteTROTEC GMBH
Germany
OIL HEATER FAN IDE 80Our most powerful indirect oil heating fan IDE 80 is our recommendation for construction sites, halls, agriculture and workshops! So much hot air for so little money — this is the successful concept of the IDE series which also applies to its currently largest member. The oil heater fan IDE 80 has a heating capacity of 80 kW setting new standards for its own class as well as for heating at construction sites, in workshops and halls as well as in agriculture. The optional flue gas discharge allows flexible use of the indirect-fired oil heater fan IDE 80 for heating enclosed spaces. The IDE 80 is then fired with diesel or fuel oil. Continuous fuel supply to the stainless steel combustion chamber is regulated by means of a high-quality Danfoss injection pump. Among the further assets are the easily accessible, external fuel filter as well as the possibility to easily read the remaining fuel volume at the filling level indication integrated in the tank.
Request for a quoteTROTEC GMBH
Germany
OIL HEATER FAN IDE 30Flexible all-rounder for a wide range of heating applications: the ultramobile oil fan heater IDE 30 If you are looking for an equally cost-effective and reliable oil heating solution with clean, dry, warm air for the flexible heating of workshops, storage and production zones, construction sites or halls, the compact oil heater fan IDE 30 is our best recommendation. Owing to its durable housing made of doubly coated material, this indirectly fired oil heater fan is optimally prepared for outdoor heating applications and can further be used for heating closed rooms when applying the optionally available flue gas discharge. The firing of the IDE 30 can variably be made with diesel or fuel oil, the constant supply of which is ensured by a high-quality Danfoss injection pump. The external fuel filter enables an easy access and the current amount of fuel can conveniently be read from the integrated tank filling level indication.
Request for a quoteATLAS MATERIAL TESTING TECHNOLOGY GMBH
Germany
The Atlas HMV is the preferred flame chamber for conducting burn rate and burn resistance tests on automotive interior materials. Its durable stainless steel construction, large glass viewing window, door- mounted burner and lift-off top cover for easy specimen access greatly enhance user convenience. The loading of specimens is simplified with a unique snap-together specimen holder. The optional Automatic Gas Control (AGC) features a digital timer and push-button gas controls that provide automatic or manual flame impingement modes. The Atlas HMV was designed with the user in mind. Worldwide use for qualification of automotive interior materials Stainless steel chamber with removable top Door-mounted burner with flame height adjustment and pilot ignition Stainless steel U-shaped specimen holder with support stand Specimen supporting wire Stopwatch and measurement scale Separate enclosure for gas controls Specimen holder assembly Stainless steel cabinet Specimen support frame Dimensions: 38cm (15'') W x 20cm (8'') D x 38cm (15'') H Weight: 11 kg (28 lbs.) Automatic Gas Control (AGC) System for automated flame impingement and piloted ignition
ORBITEC GMBH
Germany
The 5th generation of our reliable, tried-and-tested standard controller. Can be connected to Tetrix 200 or Tetrix 351. — 5.7" display — Extremely simple multilingual user guidance thanks to programming support — Monitoring of gas and water cooling — Option of welding in up to SIX sectors, in continuous or step travel mode — Individual modification of the calculated program parameters, also using current percentage button — Graphic display of the welding progress — Real-time monitoring of the welding parameters — Integrated day counter (assignment to isometries and weld joint numbers) ... Package includes: — Controller — Power cable — Controller / power source interface cable — USB stick — 2 pieces tungsten boxes — Pen with touch screen function and LED light Optional: — Cool 50 or EVO Cool cooling unit — AVC upgrade kit — Docutronic 2.2 software for documentation — Orbicontrol 3 remote control — Spare paper rolls, spare ribbon cartridges
Request for a quoteORBITEC GMBH
Germany
The 5th generation of our reliable, tried-and-tested standard controller. Can be connected to Tetrix 200 or Tetrix 351. — With special software only for RBK tube-to tubesheet weld heads — 5.7" display — Extremely simple multilingual user guidance thanks to programming support — Monitoring of gas and water cooling — Option of welding in up to SIX sectors, in continuous or step travel mode — Individual modification of the calculated program parameters, also using current percentage button — Graphic display of the welding progress — Real-time monitoring of the welding parameters ... Package includes: — Controller — Power cable — Controller / power source interface cable — USB stick — 2 pieces tungsten boxes — Pen with touch screen function and LED light Optional: — Cool 50 or EVO Cool cooling unit — AVC upgrade kit — Docutronic 2.2 software for documentation — Orbicontrol 3 remote control — Spare paper rolls, spare ribbon cartridges
Request for a quoteCERTUSS DAMPFAUTOMATEN GMBH & CO. KG
Germany
The small steam boilers of the Junior 80 - 400 TC series are completely equipped, ready-to-operate, electronically controlled rapid steam generators with all safety devices for burner technology, pressure and temperature. With a height of only 1.5 m and 0.7 m width the Junior 80 TC steam boiler can be erected even in small spaces. Combustion: Oil or gas Steam output optionally 80 - 120 kg/h 150 - 200 kg/h 250 - 400 kg/h
Request for a quoteTURKIYE MACHINES BAKERY MACHINES
Turkey
Rotary convection oven has been designed especially for producing cake, pastry, sandwich bread at pastry shops, restaurants, hotels and bakery shops. Owing to rotary platform and heat circulation systems with double fans, in each place on the tray that provides equal heat distribution and baking balance. The oven can be produced with touchscreen or manual control panel. The oven can be produced with Electric or Gas heating systems. The oven manufactured by stainless steel. Energy saving was ensured with a good heating insulation. It works safely owing to it’s limit key rotary platform system and two pieces security thermostats. The required steam quantity supplies by the cascade type powerful steam generator. Hood at the top of the oven is a standard hardware with a aspirator fan. Fermentation unit can be placed bottom of the oven which provides humidity and heat for fermenting products. Option Electric or gas heating system / Manual or touchscreen control panel
Request for a quoteGZ GUANGLI EFE CO., LTD.
China
Wall panel: sandwich style, color steel + rock wool material, polystyrene is available as required. Basement: steel structure, 3 tons rated load. Intake Fan & Exhaust Fan: air flow volume is 24000m³/h. Spraying/baking transition damper: cylinder driving mechanism. Heating & filter system: Heat ex-changer: made of stainless steel, cycling heating. Italy Imported Burner: RIELLO /G20, gas burner as option Roof filter: hinged type network installation. Lighting & control system: Upper light: 10 sets. Side light: 8 sets. Control box:made of domestic high-quality components. Spraying: with functions of constant temperature spraying. Baking temperature: 60-80 degree. Environmental filter: activated carbon as option.
Request for a quoteROTASS
China
Crafted for portability and ease of use, our 0.52L nitrous oxide gas cylinder is designed to fit snugly in your hand, ensuring convenient transportation and usage wherever you go. Whether you're a professional chef navigating a bustling kitchen or a home cook aiming for culinary excellence, this cylinder serves as the perfect companion for your culinary endeavors. A notable highlight of our 0.52L nitrous oxide gas cylinder is its affordability. In comparison to aluminum gas cylinders, this option offers a budget-friendly solution without compromising on quality or reliability. With its practicality and cost-effectiveness, this cylinder delivers exceptional value for money, making it a wise investment for anyone seeking a high-performance gas cylinder that won't break the bank. Discover the convenience and affordability of our 0.52L nitrous oxide gas cylinder and elevate your culinary creations to new heights.
Request for a quoteINOVEN
Turkey
14 TRAY CONVECTION OVEN - WE HAVE BOTH ELECTRICAL OR GAS OPTION. IT IS SUITABLE FOR ANY TYPE OF PASTY BAKING
Request for a quoteKÖSTER & CO. GMBH
Germany
Ideal for shear studs and threaded studs High repeatability Hydraulic plunge damper Standard support with 2 legs Body Polyamid Compensation for stud length variations up to 8mm Control cable plug (4 wire) Stud welding with shielding gas: optional
Request for a quoteKÖSTER & CO. GMBH
Germany
Best for stud welding using shielding gas ø 3 – 16 mm High repeatability Standard support with 2 legs Body made of fibre-glass reinforced polyamide Compensation for stud length variations up to 8mm Control cable plug (4 wire) Stud welding with shielding gas: optional
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
KÖSTER & CO. GMBH
Germany
Self-diagnosis: Overheating, short circuit control,mains phase failure and malfunction of pilot arc Fully controlled power source with thyristor bridge Microprocessor controlled Constant current regulation Repeat cycle lock Mains connection special voltages (V): optional Dust and moisture protection of control unit Steel housing, powder-coated Shielding gas equipment: optional Stud counter: standard Interface for automatic components: optional Menu: selection of various languages
Request for a quoteKÖSTER & CO. GMBH
Germany
Self-diagnosis: Overheating, short circuit control, mains phase failure and malfunction of pilot arc Fully controlled power source with thyristor bridge Microprocessor controlled Constant current regulation Repeat cycle lock Mains connection Special voltages (V): optional Dust and moisture protection of control unit Steel housing, powder-coated Shielding gas equipment: optional Stud counter: standard Interface for automatic components: optional Menu: selection of various languages Two gun connection for stud welding guns
Request for a quoteKÖSTER & CO. GMBH
Germany
Self-diagnosis: Overheating, short circuit control,mains phase failure and malfunction of pilot arc Fully controlled power source with thyristor bridge Microprocessor controlled Constant current regulation Repeat cycle lock Mains connection Special voltages (V): optional Dust and moisture protection of control unit Steel housing, powder-coated Shielding gas equipment: optional Stud counter: standard Interface for automatic components: optional Menu: selection of various languages Two gun connection for stud welding guns
Request for a quoteKÖSTER & CO. GMBH
Germany
Self-diagnosis: Overheating, short circuit control,mains phase failure and malfunction of pilot arc Fully controlled power source with thyristor bridge Microprocessor controlled Constant current regulation Repeat cycle lock Mains connection special voltages (V): optional Dust and moisture protection of control unit Steel housing, powder-coated Shielding gas equipment: optional Stud counter: standard Interface for automatic components: optional Menu: selection of various languages
Request for a quoteKÖSTER & CO. GMBH
Germany
Self-diagnosis: Overheating, short circuit control, mains phase failure and malfunction of pilot arc Fully controlled power source with thyristor bridge Microprocessor controlled Constant current regulation Repeat cycle lock Mains connection Special voltages (V): optional Dust and moisture protection of control unit Steel housing, powder-coated Shielding gas equipment: optional Stud counter: standard Interface for automatic components: optional Menu: selection of various languages
Request for a quoteKÖSTER & CO. GMBH
Germany
The model SK15 is a robust stud welding gun, designed for welding of threaded studs with ceramic ferrules ø 4 - 12 mm Ideal for short cylce stud welding ø 3 - 12 mm Best for stud welding using shielding gas ø 3 – 12 mm Lifting range 1 – 4,5 mm Standard support with 2 legs High repeatability Body made of fibre-glass reinforced polyamide Control cable plug (4 wire) Optional Integrated shielding gas device
Request for a quoteCOMPUR MONITORS GMBH & CO. KG
Germany
Imitated by all, duplicated by none. With decades of outstanding performance, this latest version of the Monitox is the best yet. It shows the actual gas concentration on a recessed LCD display and responds to hazardous concentrations within seconds giving an audible as well as a visual alarm. Monitox plus is very small and lightweight. Its housing is made of sturdy, galvanized ABS, withstanding the harshest industrial environments. The chromium plated surface protects it from electromagnetic interference. Handling the Compur Monitox plus is quick and easy. Sensor replacement is a breeze since a plug-in socket sensor allows replacement without even opening the instrument. A recessed button on the front side of the instrument allows easy access to a menu for automatic zero and calibration. Thus even calibrations can be done without opening the instrument. Two alarms can easily be set to any value within the measuring range of the instrument by push-button. For added safety the Monitox plus features smart technology such as a “missing sensor-alarm” which detects if the electrical connection to the sensor has been damaged. With the optional Compur gas generator a 100 % performance test can be done within 10 seconds, without a gas cylinder.
Request for a quoteEWM AG
Germany
— MIG/MAG pulse welding machine with optimised synergic characteristics for welding steel — Pulsed MIG/MAG welding, MIG/MAG welding, MMA welding and gouging — Significantly less spatter formation and therefore less finishing work thanks to the pulse function — Welding with solid wire and flux cored wire — Drive 4X Steel: Connection socket for electrode holder on the wire feeder as standard — Drive 4X Steel D200: Adjustment of the gas quantity directly on the wire feeder via the gas control valve as standard. — Factory-fit option: Extra gas valve for increased safety — Infinitely adjustable arc dynamics (choke effect) — Adjustable start and end-crater functions — Synergic or manual welding operation
Request for a quoteDATAPHYSICS INSTRUMENTS GMBH
Germany
The optical contact angle meters of the OCA series are high-precision measuring systems for the characterisation of interfaces and surfaces. They combine high-resolution optics, pinpoint liquid dosing and precise sample positioning to create powerful, reliable measuring systems. The special model OCA 25-HTV is based on the OCA 25 standard model. It is suitable for measuring contact angles at high temperatures of up to 1800 °C and in a vacuum of up to 0.00001 mbar or in an inert gas atmosphere. With an optional dosing system, the OCA 25-HTV can also be used at room temperature for all standard analyses such as the determination of surface energy and the measurement of interfacial tensions.
Request for a quoteNAMSAN METAL COMPANY
Turkey
• 3 Burners Big Gas Cooker (LPG/NG) • Blue Flame • Low Gas Consumption • Enamelled Body • Painted Pan Support • Aluminium Gas Burners • Painted Top Cover OPTIONS: - Color: Black, Brown, White - Bottom Cover
Request for a quoteNAMSAN METAL COMPANY
Turkey
• 3 Gas Burners(LPG/NG) + 1 Hotplate • Blue Flame • Low Gas Consumption • Enamelled Body • Painted Pan Support • Aluminium Gas Burners • Bottom Cover OPTIONS: - Color: Black, Brown, White - Painted Top Cover - Ignitor
Request for a quotePIMAK PROFESSIONAL KITCHEN EQUIPMENTS
Turkey
Energy Type Gas / Electric Gas (Mbar,Volt) 21-25 / 30-50 Power(kW/kcal) 13/11180 Capacity (Quantity) 5 Trays Dimensions (cm) 92X100X160 Weight (Kg.) 125
Request for a quoteResults for
Gas option - Import exportNumber of results
52 ProductsCompany type
Category