Gas detector-controllers - Import export

Wireless/Cordless® design Network capacity up to 32 devices Line, battery, solar, and solar/battery power options Wired and/or wireless configuration options Environmentally bulletproof CXT sensors for detecting toxic and combustible gases

The MX 256 is a digital control unit intended for the detection and measurement of gases present in the atmosphere and more generally for the processing of any digital signal from digital sensors (OLCT 10N types), relay module, analog output module, logic input module. Thanks to its new option, an industrial controller module or remote HMI, it is possible to add analog input modules for sensor-transmitter connection (4-20 mA) and / or relay modules, this allows to not only extend the capacities but also to have event recordings (Location, Alarms,.....) and to have access to the data via the embedded web page.

Compatible with Detcon RXT & CST Tranceivers 32 channel capacity panels Real time 4 line 40 character LCD Field device status and location tag Alarm condition LEDs and optional strobe & horn Non-intrusive operator interface

The SmartWireless Site Sentinel CX sensor station is an accessory to any Detcon wireless RXT transceiver or wireless controller and is easily and economically deployable in both permanent and temporary installations. The CX wirelessly transmits the data from up to 4 wired gas detectors back to wireless controller and includes a battery that powers the radio, alarm devices, and the attached sensors. The Sentinel CX is compatible with Detcon’s Model RXT transceivers. Flexible and expandable, a Site Sentinel network can include up to 32 devices and consist of any combination of wireless and/or wired sensors, one or more Site Sentinel control panels, and alarm warning devices. Options include audio alarm, visual alarm, external alarm port, and up to 4 external wired sensor inputs. Standard features include a power-in port and power switch.

Powerful audible alarm (103 dB @ 1m) Run time of up to 170 hours More than 4-month datalogging capacity Easily transportable - less than 7 kilos 2.4 GHz frequency 30 Devices per network MX 40 Up to 32 Devices, Wired or Wireless Up to 16 BM 25 Configurable up to eight zones Alarm and Fault Condition LEDs Rent the BM 25 & MX 40!

The MX 16 is a compact digital or analog controller, one input, low-profile controller that continuously monitors gas detection, like: O₂ CO₂ CH₄ H₂ GPL Specially designed for applications in MRI room, laboratory, storage, small boiler room, and breweries or battery charging rooms, the MX16 measuring unit prevents the risks of explosion linked to the presence of toxic, anoxic and explosive gases in the ambiant air. Small size, ease of installation and use are the main strengths of the plant. Used with the OLCT 10N O₂ and CO₂ digital sensor series or any other O₂, CO₂, CH₄, GPL and H₂ analog sensor, the MX16 guarantees you a solution that complies with French and European standards. Easy to install: requires a power connection, a cable between the control unit and the detector (supplied with the Easy Duo). It does not require configuration software (factory configured)

64 channel capacity Large LCD with touch-screen user interface Analog, digital or Modbus RTU serial input capability Readily field expandable with auto configuration capability Versatile distributed I/O installation options Lightning & over-voltage protection standard Data logging of alarms, calibration, comm errors, faults, peak and average readings

No central processing unit (CPU) Addressable gas, flame and third party instrumentation Fault tolerant Simple system configuration Flexible system design User friendly, client specific interface

Intended for the protection of high risk plants and facilities Automatic systems Intruder/burglar alarm SIL certified Interaction with SCADA systems CCTV and logic function

SIL3 and SIL2 according to EN50402:2006 and IEC61508:2011 Up to 64 secured channels for direct or network wiring Direct network and loop connection Redundancy from measurement to alarm relays Functions AND, OR, MIN, MAX, Voting

2-16 channels SIL2 according to EN61511 2 discrete alarm relays per channel, 1 common Alarm 3 relay, 1 common Fault relay Keyboard or PC setup RS 485 output

32 Channel Capacity Backlit LCD Screen Display Analog or RS-485 Input Options Easy Intuitive Field Configuration Wired or Distributed I/O Extensive Event Data Logging SmartWireless Capable

Analog and digital controller 4 or 8 lines, up to 32 detectors Up to 32 fully programmable relays (OR, AND, NAND, NOR, Voting functions) Large graphic display Remote modules (cost savings on wiring installation) USB Data logging capability RS485 Modbus RTU and multiple analog outputs SIL-1 Certified to IEC/EN 61508 and EN 50402 functional safety standards

The controller is easy to configure and is user friendly. Measurement ranges in engineering units, adjustable alarm set-points, optional serial interfaces, and many other features offer flexibility to meet most demanding applications. Integrates with two or four points of gas or flame detection Available in multiple configurations to meet the needs of most industries Compatible with 4-20mA , MODBUS, and input relays Three types of adjustable alarms per channel Freedom Direct compatible

Analog and digital controller 1 or 2 channels, up to 8 detectors Fully scalable 5” LCD back-lit graphic display Five programmable events per detector Smart keys make embedded multi-language menus simple to use

Designed to ensure the safety of boiler plants, battery charging rooms or small units where your operations are at risk 1 channel 2 Discrete alarms Din-rail mount Combines highly reliable monitoring, simple implementation and low costs

Safe, Accurate and Reliable Car Park Air Monitor The CPS car park air monitor accurately and reliably protects the public and employees from airborne toxic gases in parking facilities and tunnels. The system was designed to comply with the high air quality safety standards enforced in such European countries as Germany, the Netherlands and Belgium. Optimizes Ventilation for Energy Savings Continuous air monitoring significantly reduces your operating costs by optimizing the efficiency of ventilation systems and servo controls. Such efficiencies can produce energy savings of up to 40% when used with specific equipment. Versatile and Programmable Available in wall- and rack- mounted versions, the CPS™ central controller and its various modules are user-programmable for specific car park applications.

Centralized Graphic Display and Alarm Controller Seamless Upgrade for Current Loop and Direct Cat Bead Detectors MODBUS Interfacing and Output Relay Options for Any Environment Compatibility with Teledyne’s Full Array of Gas Detection Transmitters and Detectors Hazardous Location Approval for Class I, Division 2 Applications (certain units only)

The Merlin 1000VW+ gas pressure proving, electric and water isolation system is designed specifically for use in educational buildings and Laboratories. The 1000VW+ can also interlock any mechanical ventilation.

The Merlin GDPX+ is a 16 zone gas pressure proving & detection panel which can be used in many applications, e.g. mechanical rooms, car parks, shopping centers and the most common being a boiler house application. Utilizing a solenoid valve and a pressure transducer the Merlin GDPX+ will check for a pressure drop or leak in the downstream line before allowing the gas to be supplied. Once gas has been supplied the unit will constantly check the incoming gas supply pressure to ensure that a naked flame cannot be extinguished by a weak draft.

The Merlin CO2-X can be used independently or can work in conjunction with one of our Merlin gas safety systems. In the event where the CO2 levels rise to a dangerous level, the Merlin CO2-X Monitor will sound an audible alarm to alert the user of the danger, automatically drive ventilation fans reducing CO2 & temperature as well as shutting off any connected utilities such as gas solenoid valves. An alarm condition can also be communicated to building management systems.

Fixed gas detection system for oxygen, toxic and combustible gases This DIN – rail mounted modern control module saves space, money and installation time. One safe controller for all gases: Any combination of a sensor head plus control module is a complete gas detection system. This makes the Statox 501 so safe and reliable. The Statox 501 also gives you the opportunity to alter or expand existing systems with minimum cost and labor. Programs for all gases and measuring ranges are permanently stored in the memory of the controller. The user-friendly software program allows authorized personnel to select different configurations by a simple push of a button. Easy to install and easy to use The controll modules as well as the power supply and the common alarm module clip on to a DIN rail. The remote sensor heads and any alarm or recording devices connect to terminals on the front of the module. Each Statox 501 control module has three relays for alarm 1 and 2 and system failure (115 / 230 V AC / 2 A). An analog output for recorder or process control systems is also included. Measured values are displayed on a 4 digit LED-display. It is easy to program or calibrate the Statox 501! Just follow the menu! If intrinsically safe transmitters are to be installed in division 1 areas, they can be connected via intrinsically safe repeaters. 24 V power supply as well as the signals for the common alarm module are transmitted via bus from one module to the next. All terminals are easily accessible from the front. Field proven sensors for reliable gas detection Compur manufactures electrochemical sensors for the detection of oxygen deficiency and toxic gases. These sensors generate an electrical current proportional to the actual gas concentration. The remote sensor heads are designed as intrinsically safe certified 4 - 20 mA transmitters and have an integrated concentration display. Combustible gases can be detected with a variety of catalytic beads (pellistors) or infrared technology. The sensor heads are certified "Ex d" or "Ex de" and can be connected directly to the control module, even if they are to be used in classified areas. The control module can supply and operate different designs of catalytic sensors. With so many possibilities, the system can easily be tailored to suit your individual application needs. Easy maintenance saves time and money Maintenance of the 4 – 20 mA transmitters is very easy. A one-man calibration or replacement of the sensors can be done without further precautions, even in classified areas. Accessories A range of wall-mount cabinets for a maximum of 5, 8 or 32 controllers as well as a 19”-carrier, ensure an easy professional installation. -20 - +60 °C

ASCO CO2 Gas Detectors are used to protect personnel wherever CO2 gas or dry ice is used in closed areas, for example during dry ice blasting or when producing dry ice. ASCO offers wallmounted solutions for area monitoring and portable devices for personal protection. ASCO CO2 Gas Detectors ensure continuous and automatic CO2 content measuring in the ambient air using infrared absorption measuring (NDIR). This technology is very troubleresistant to temperature variations or air draughts and therefore measures very accurately. The CO2 gas detectors are very simple to handle and all components are built splash proof.

The GasPro gas detector can be equipped with sensors for up to five gases with ATEX approval. With the option of equipping the gas detector individually with various sensors, the GasPro gas detector is ideal for use in sewers, sewage treatment plants, landfills, ships, chemical and oil processing industries. An important unique novelty "positive safety" display. The GasPro signals the status at a glance via a three-color LED, green display = everything OK, yellow display = still OK, but a check is due soon, red display = not OK Particularly noteworthy is the loud alarm at 95 db and the optical signaling indicated by two LEDs that can be recognized from each side. The measured gas concentrations are saved every 10 seconds and stored in the internal memory. In addition, various events (switching on, alarm, calibration) are stored in the memory. The collected data can be transferred to a PC with a USB cable. A charging station with interface or a calibration station are also available.

Specially developed for the diverse tasks on the construction site, the Schütz Messtechnik company offers tailor-made measuring tools that reliably and comprehensively support the craftsman in all of his work “all around gas”. The complete solution for the load, leak tightness and usability test on gas pipes can be carried out safely and quickly, including documentation. GDPR-compliant as all personal data is protected against unauthorized access by a PIN. The measurement result can be printed out at the test point on site (optional), fully automatically and without interrupting the system. The professional solution for all measurements according to TRGI The prescribed load tests, tightness tests and usability tests, in the interior installation are possible with just one measuring device With integrated pump for pressure generation Very short measuring time through reference leak measurement PC software included

With the very simple operation and the generated and saved measurement protocol, the documentation can be created quickly and completely reproduced. It is possible to save the measurement data in the device and to print it out again later. No tracer gas nor a second measuring device are required for use. The internal battery, the 230V charger or the 12V vehicle voltage can be used for the energy supply. All included in a complete set. Ethane is always contained in natural gas; evidence of this gas is also evidence of natural gas. A lengthy gas analysis is normally required to prove beyond any doubt that the measured gas concentration is actually natural gas and not swamp gas. This, also due to the sampling, a difficult and time- consuming process, is completely eliminated. Measurement and sampling directly at the borehole is easily possible. The printout can take place after the measurement.

With the GPL 3000 you can detect the smallest of leaks. Leak detection is particularly problematic for seals with swellable materials. The leak detection sprays cause the sealing materials to swell and the leak is temporarily sealed again. The use of a gas detector is essential in this area. The sensor in the GP 2000 is protected from dirt and mechanical stress by a metal protective cap. Clear display of the measured values makes it easy for inexperienced users to find leaks. Together with the robust metal sensor head and the stable casing, the GP 2000 is a professional leak detector for everyday work.

With the GPL 3000 you can detect the smallest of leaks. Leak detection is particularly problematic for seals with swellable materials. The leak detection sprays cause the sealing materials to swell and the leak is temporarily sealed again. The use of a gas detector is essential in this area. The sensor in the GPL 3000 is protected from dirt and mechanical stress by a metal protective cap. Clear display of the measured values makes it easy for inexperienced users to find leaks. Together with the robust metal sensor head and the stable casing, the GPL 3000 is a professional leak detector for everyday work.

With the GPL 3000 Ex you can detect the smallest of leaks. Leak detection is particularly problematic for seals with swellable materials. The leak detection sprays cause the sealing materials to swell and the leak is temporarily sealed again. The use of a gas detector is essential in this area. The sensor in the GPL 3000 Ex is protected from dirt and mechanical stress by a metal protective cap. Clear display of the measured values makes it easy for inexperienced users to find leaks. Together with the robust metal sensor head and the stable casing, the GPL 3000 Ex is a professional leak detector for everyday work.