Gas air heaters - Import export

Hot air heaters with gas operation from 23 to 34 kW The K gas hot air heaters are units that work completely autonomously, that is, they do not need heat dissipative elements, which reduces acquisition and installation costs. Its operation can be methane gas or propane gas and its operation is based on heating the air drawn in by the fans and driving the hot air inside the room to be heated. The main advantages over other heating systems are: - They do not take up space on the floor. - Reduction of acquisition and installation costs. - Very fast heating system. - Air diffusion can be direct or a network of ducts can be applied to channel the air into adjacent areas where the equipment has been installed. - Combustion efficiency greater than 90%.

High efficiency, Homogeneously heat distribution in a short time, Ease to assemble and execute, Economic, Investment and operating costs are lower than, Long life, Electronic ignition system heating system with boiler and tubing system With the low or high step burning system, the desired temperature comfort can be provided easily according to the temperature of the air. Built-in remote control for convenient and easy operation. Technical Features Model Sirokko 20 Sirokko 30 Sirokko 40 Unit 1st-2nd Step 1st-2nd Step 1st-2nd Step Nominal Thermal Power (kW) 10,4 - 17,3 16,4 - 27,2 22,1 - 36,7 Natural gas Consumption (Nm3/sa) 1,1 - 1,81 1,7 - 2,84 2,3 - 3,83 Heating Area (m2) 60 - 120 80 - 150 150 - 225

Flameproof mini line heaters ATEX Ex II 2 G Ex’d’ IIC T4-T6 nach EN60079-0 und EN60079-1 The Exheat range of flameproof mini line heaters consist of a screw plug or flanged type immersion heater mounted in a thermally insulated heating vessel. They are designed to efficiently transfer heat to a flowing medium (liquid, air or gas). All flameproof heaters are fully ATEX certified and designed for use in zone 1 & 2 hazardous areas, gas group IIC.

Portable diesel heaters for heating closed spaces The portable diesel hot air heaters with smoke outlet, are ideal for heating indoor spaces. The equipment is totally portable and incorporates a fuel tank to obtain a correct autonomy of operation. The equipment incorporates a burner that provides a flame inside the combustion chamber that travels inside to obtain the greatest heat exchange. A fan providing air inside the equipment and when passing through the hot zones increases its temperature and is driven inside the room to be heated. These equipments have flue gas outlet and are suitable for any type of premises. The equipment can be controlled with an ambient thermostat that is responsible for starting or stopping the equipment depending on the desired temperature.

Domestic heating with hot air boiler with diesel operation Hot air boilers with diesel operation are a fast and efficient system for heating domestic and commercial premises. The equipment has a soundproofed interior of the diesel burner so that its operation is as quiet as possible. It also incorporates a 3-speed fan to adjust the air flow according to the heating needs of the room to be heated. For its operation, a fuel tank, a smoke outlet and a single-phase connection socket are required. The diffusion of the hot air can be direct or with a network of ducts to direct the hot air to the different rooms to be heated.

Industrial warm air heater with diesel or gas operation from 26 to 500 kW The MM hot air generators are indirect heating type equipment (the hot air does not mix with the combustion gases) and they work completely autonomously. They do not need additional elements for heat dissipation, a fact that reduces acquisition, installation and maintenance costs. Its operation is based on the heating of a certain air flow, through the combustion of diesel, natural gas or propane gas. Said flow is aspirated and driven by the fans that the equipment incorporates and that comply with the ERP 2020 regulations. The main advantages over other heating systems are: - Reduction of acquisition and installation costs - Very fast heating system - Air diffusion can be direct or a duct network can be applied - 90% combustion efficiency

Hot air heating with portable equipment with butane gas or propane gas for open or properly ventilated premises Hot air heaters with butane or propane gas operation are a really effective system for heating open or properly ventilated spaces. The equipment has a gas-operated burner, which provides an internal flame responsible for heating a small combustion chamber. The air driven by the fan passes through the combustion chamber and the hot air provided in this exchange is used to increase the temperature of the room to be heated.

Industrial wall mount heater with diesel operation The GS wall-mounted industrial heaters are units that operate completely autonomously, that is, they do not need heat dissipating elements, which reduces acquisition and installation costs. Its diesel operation is based on heating the air drawn in by the fans and driving the hot air inside the room to be heated. The main advantages over other heating systems are: - They do not take up space on the floor. - Reduction of acquisition and installation costs. - Very fast heating system. - Air diffusion can be direct or a network of ducts can be applied to channel the air in adjoining areas where the equipment has been installed. - Efficiency of combustion of 92%.

Gas unit heater free blowing. 90 KW, ErP 2021

we are looking for country distributors, buyers

Electrical gas heaters for operating pressure up to 500 bar - Seal gas heaters, fuel gas heaters - Natural gas heaters for gas pressure regulation stations - LNG and LPG vaporizers - Vaporizers and heaters for industrial gases - Process heaters - Gas heaters for analysis and laboratory application ATEX, IECEx, TR-CU and other international certificates

Finned Tubular Heaters are the ideal solution for air or gas flow heating processes. The ribs enlarge the heat-releasing surface significantly. Basis of the finned tubular heaters are our 8.5 mm tubular heaters. The outer diameter of the fins is 28 mm. The elements can be delivered straight, U-shaped or circular (special design on request). Tubular heater as well as fins are made of stainless steel, the standard for the tube is 1.4828 (other materials possible as in chapter Round Tubular Heaters), the fins are normally made of 1.4301 (1.4571 on request).

Portable diesel heaters for heating open or properly ventilated spaces The portable diesel hot air heaters without smoke outlet are ideal for heating premises where there is proper ventilation or in open spaces. The equipment is totally portable and incorporates a fuel tank to obtain a correct autonomy of operation. The equipment incorporates a burner that provides a flame inside the combustion chamber that travels inside to obtain the greatest heat exchange. A fan providing air inside the equipment and when passing through the hot zones increases its temperature and is driven inside the room to be heated. These equipments do not have flue gas outlet and are only suitable for ventilated premises or open premises, therefore, their use in closed premises is totally prohibited. The equipment can be controlled with an ambient thermostat that is responsible for starting or stopping the equipment depending on the desired temperature.

Heating of mechanical and automotive workshops with hot air equipment with diesel operation The hot air generators with diesel operation of the VE series are the perfect solution for the heating of small mechanical or automotive workshops. The equipment will quickly and efficiently provide hot air to obtain a comfortable comfort temperature in a very short time. The team has a 35-liter fuel tank for a range of about 3-4 days. A powerful and silent fan provides the hot air necessary for heating premises of up to 150-175m2. The room thermostat incorporated in the equipment will be in charge of starting or stopping the equipment depending on the desired temperature and in this way the energy consumption of the equipment will be optimized. The installation is as simple as installing a smoke outlet to evacuate combustion gases outside the room to be heated and a single-phase electrical connection socket.

Hot air fan heaters with water coil (20 to 106 kW) - ATR The hot air heaters with hot water coil are ideal for heating all types of commercial, industrial or agricultural premises where a flow of hot air is required to heat different areas of the premises to be heated. The hot water must be produced by a diesel, gas or biomass boiler. The hot water, by means of a circulation pump, passes through the interior of the heating coil of the air heater and the heat transfer is carried out by the air fan of the air heater. The fan can be axial or centrifugal, the axial type is used for direct dissolution and the centrifugal fan allows a network of ducts to be applied in addition to having a greater reach.

Electric heaters for any type of premises RP PROFESSIONAL electric heaters or heaters are robust and with the best components to obtain a fast, efficient and durable electric heating system. All models include, as standard, an ambient thermostat to start and stop the equipment once the desired temperature has been reached in the room and in this way optimize energy consumption. The 30 kW model can be applied to an external room thermostat with 10m of cable in case you want to control the room temperature at a point away from the equipment. Constructive details - Armored electrical resistance AISI 321 of high thermal exchange - Built-in room thermostat - Power selector - 1.5m electrical connection cable - Manual reset safety thermostat - Front protection grid - Channel up to 6m (except RP 33 M model) - Possibility of stacking several teams

Ergonomic design, portability and easy installation Suitable for all indoor spaces as cafe, restaurant, shopping Malls and industrial spaces.. Equipped by stainless steel with high efficiency %98 Comfortable with low sound level Thermostatically equippied Gas saving with 15-24 minutes timer option 3-10 stage adjustable control system

They are the most economical and correct solution hot air generators for large volume spaces where ambient air should be heated. High efficiency, Homogeneously heat distribution in a short time, Ease to assemble and execute, Economic, Long life, Investment and operating costs are lower than, Electronic ignition system heating system with boiler and tubing system Technical Features Model Sirokko 50 Sirokko 60 Sirokko 70 Nominal Thermal Power (kW) 47,5 57 66,5 Natural gas Consumption (Nm3/sa) 5 5 7,5 Heating Area (m2) 200-400 250-500 325-650

The most intense areas in terms of energy losses of workshops and sales areas are their outer doors. Heated air in the winter and the costly chilled air in the summer are lost through these openings. The larger the doors, the higher the costs due to uncontrollable changes between indoor and outdoor temperatures. It also increases the possibility of airflow between the doors. The ambient temperature is kept under control with the help of air curtains. With this, energy costs decrease and working conditions improve. Technical Features Model AIR WALL 20 Power 21,7 kW Natural Gas Consumption 2,30 Nm3/sa Gas Connection 20-55 mbar Air Flow 1400x3 m3/sa

Sirokko Farm is a hot air generator with high heating and combustion efficiency, suitable for duct type use, operating with natural gas and propane. It is designed to provide intensive breeding by heating farm and poultry buildings. Thanks to its pressurized fan, it is suitable for duct-type use and can be used independently of the environment to be heated. In addition, it prevents unnecessary heating costs by providing the desired amount of hot and clean air to the environment thanks to its special bidirectional damper air ducts. Easily adjustable air duct providing clean air intake at the desired rate. Modular output channel suitable for duct type and ductless use. Technical Features Nominal Thermal Power 82 kW Efficiency %89 Air Flow 2.000 m³ Blowing Distance 30 m Power Supply 220-240v 50 Hz

6 different power types. Compatible for factories, workshops, gyms, cafes, restaurant, chicken farms, indoor swimming pools, it can be used in all large-volume spaces such as hangars, meeting rooms and warehouses. It is remote controlled and modulated with 3 heat stages. Provide heat comfort and energy savings assists. 6 different thermal power values are produced in 2 different models, including L and U type. Using engineering, the preferred reflectors and angles allow heat to spread to the maximum area. Compatible with LPG,LNG and Natural Gas. Safe gas valve system is used in our devices

6 different power types. Compatible for factories, workshops, gyms, cafes, restaurant, chicken farms, indoor swimming pools, it can be used in all large-volume spaces such as hangars, meeting rooms and warehouses. It is remote controlled and modulated with 3 heat stages. Provide heat comfort and energy savings assists. 6 different thermal power values are produced in 2 different models, including L and U type. Using engineering, the preferred reflectors and angles allow heat to spread to the maximum area. Compatible with LPG,LNG and Natural Gas. Safe gas valve system is used in our devices

Powrmatic CPx 360kW Gas Fired Cabinet. Upright. Horizontal and External Cabinet Heaters also available

Power: 400 – 800 – 1200W AC 220-240V, 50/60 Hz 3 Power Adjust Quiet Operation Compact & lightweight Changes 7 Colors Package includes: 1 X Fan Heater 1 X Cord 1 X Manual GW 1 Kg / NW 0.860 Kg SKU: HV-H1200

These heaters are also designed to use in outdoor and semi open cafes, restaurantss, hotel, patios and offices with 3intensity levels for economical heating purposes. 2 staged unit remote control system modulation provides you to supply heating comfort and energy investment. It has an appealing design with a cylinder shape. It can be operated by LPG, LNG and Natural Gas. It has an efficieny value that could make an intensive heat transfer. There is a safe gas valve system in all our products.

These are designed to use in outdoor and semi open cafes, restaurantss, hotel, patios and offices with 3intensity levels for economical heating purposes. 2 staged unit remote control system modulation provides you to supply heating comfort and energy investment. It transfers the heat intensively to needed spaces by the support of sheet metals around the seramic plates It can be operated by LPG, LNG and Natural Gas. It has a 72% efficieny value that could shorten payback time and supply customer satisfaction There is a safe gas valve system in all our products.

These are designed to use in outdoor and semi open cafes, restaurantss, hotel, patios and offices with 3intensity levels for economical heating purposes . 2 staged unit remote control system modulation provides you to supply heating comfort and energy investment. It has an appealing design covered by black glass that is translucent during heating process. It can be operated by LPG, LNG and Natural Gas. It has a 1200 temperature heat resistant glass that could make a intensive heat transfer. There is a safe gas valve system in all our products.

55.000 kcal/H diesel force air heater, there are two options, one of with chimney, second without chimney. - no smoke - high quality - 24 month warranty

Steam air heaters heat materials, in particular air and liquids. Widely use in dairies for example.