Fume exhausters - Import export

Heat transfer between a gaseous media and a liquid finned tube heat exchangers are often called air/water heat exchangers or gas/water heat exchangers. Heat transfer between a gas (for ex. air, steam) and a liquid (for ex. water, seawater, oil) takes place in the air-/water heat exchangers. Very often air/water heat exchangers are used as exhaust heat exchanger to gain the energy out of warm or hot exhaust fumes. Finned tube radiators can also be used as air heater, air cooler or condenser To improve the thermal output transfer from the gas to the liquid, fins made of well heat transferring materials are put on the tubes. The great increase of the thermal efficiency when applying fin tubes allows a substantial reduction in size and costs of such cooling equipment. The surface of such tubes is substantially increased and consequently less tubes are required compared with exchangers with plain tubes.

Easy to guide push along carpet probe with surface filter, hose filter, hose and plug-in coupling for the inspection of pipe runs, to absorb gas traces during the mains survey with the aspiration method. Very lightweight - for daily use without fatigue. The wide border of the flexible carpet probe clings to surface unevenness of the street, largely preventing the entrance of interfering gases (exhaust fumes, ?) during the survey work.

With the MiJET part cleaning system it is possible to keep workplaces clean and workpieces hygienically cleaned with the simplest technology. An electrical connection is not necessary. Only a compressed air connection is required to use the device. Application The actual task of the MiJET is to filter oily air. Chips of the work pieces accumulate in the container. Operators often tend to blow off finished workpieces into the machine. This quickly results in dirty working environments and poor air in the production hall. However, we avoid this by exhausting these fumes. Oils are trapped from the exhaust air and chips and coolants accumulate in the container.

With the MiJET part cleaning system it is possible to keep workplaces clean and workpieces hygienically cleaned with the simplest technology. An electrical connection is not necessary. Only a compressed air connection is required to use the device. Application The actual task of the MiJET is to filter oily air. Chips of the work pieces accumulate in the container. Operators often tend to blow off finished workpieces into the machine. This quickly results in dirty working environments and poor air in the production hall. However, we avoid this by exhausting these fumes. Oils are trapped from the exhaust air and chips and coolants accumulate in the container.

Air heat exchangers as finned tube heat exchangers Heat transfer between a gaseous media and a liquid Finned tube heat exchangers are often called air/water heat exchangers or gas/water heat exchangers. Heat transfer between a gas (for ex. air) and a liquid (for ex. water) takes place in the air-/water heat exchangers. To improve the thermal output transfer from the gas to the liquid, fins made of well heat transferring materials are put on the tubes. Very often air-/water heat exchangers are used as exhaust heat exchanger to gain the energy out of warm or hot exhaust fumes. Finned tube heat exchangers can also be used as air heater, air cooler or condenser.

EEx’e’ certified electric duct air heater EEx e T2 – T6 ATEX The “LEH-Exe” type electric heaters comprise a range of certified EEx e air duct heaters, custom built to meet client specifications and suitable for use in zone 1 & 2 hazardous areas. The main applications are the heating of air in ventilation - / air conditioning or heat-recovery installations. Wide use areas are applications of the process - / environment-technology i.e. at the catalytic afterburning of exhaust fumes or drying ovens or in the plastic - / textile or paper industry. Through a variable construction concept, diverse use possibilities emerge. The application of highly compacted electrical heating elements with high purity compacted magnesium oxide powder sheathed metal tube and the direct heat transfer at the medium to be heated leads to an efficient realization of the electric energy to thermal energy. Special materials of acid constant rustproof steel stand for the heating of aggressive media by disposal. Alternatively, the heaters can be delivered also in the materials INCOLOY, INCONEL, HASTELLOY and MONEL. The duct heaters essentially consist of the following main-components: Duct with flat flanges Rod heating elements Temperature Sensors (Thermostat / Thermocouple / RTD) Electrical terminal box

Electric duct heater Electrical duct heater type “LEH-K” are intended for the heating of gaseous media. The main applications are the heating of air in ventilation - / air conditioning or heat-recovery installations. Wide use areas are applications of the process - / environment-technology i.e. at the catalytic afterburning of exhaust fumes or drying ovens or in the plastic - / textile or paper industry. Through a variable construction concept, diverse use possibilities emerge. The application of highly compacted electrical heating elements with high purity compacted magnesium oxide powder sheathed metal tube and the direct heat transfer at the medium to be heated leads to an efficient realization of the electric energy to thermal energy. Special materials of acid constant rustproof steel stand for the heating of aggressive media by disposal. Alternatively, the heaters can be delivered also in the materials INCOLOY, INCONEL, HASTELLOY and MONEL. The duct heaters essentially consist of the following main-components: Duct with flat flanges Rod heating elements Temperature Sensors (Thermostat / Thermocouple / RTD) Electrical terminal box

Electric Air heater Electrical air heater type “LEH-A” are intended for the heating of gaseous media. The main applications are the heating of air in ventilation - / air conditioning or heat-recovery installations. Wide use areas are applications of the process - / environment-technology i.e. at the catalytic afterburning of exhaust fumes or drying ovens or in the plastic - / textile or paper industry. Through a variable construction concept, diverse use possibilities emerge. The application of highly compacted electrical heating elements with high purity compacted magnesium oxide powder sheathed metal tube and the direct heat transfer at the medium to be heated leads to an efficient realization of the electric energy to thermal energy. Special materials of acid constant rustproof steel stand for the heating of aggressive media by disposal. Alternatively, the heaters can be delivered also in the materials INCOLOY, INCONEL, HASTELLOY and MONEL. The air heater essentially consist of the following main-components: Process flange Rod heating elements Temperature Sensors (Thermostat / Thermocouple / RTD) Electrical terminal box

A high-quality nutritional supplement with with natural selenium from selenium yeast plus vitamin C, E, provitamin A (carotenoids) and magnesium. Harmful environmental influences, exhaust fumes, smog, ozone, solar radiation, luxury foods and stress can result in a forming of aggressive substances. These substances are called "free radicals". Free radicals can affect the balance of the metabolic reactions. The trace element selenium and the antioxidants vitamins C and E have been proven to protect cells from oxidative stress. Therefore it is reasonable to supply the body regularly with these so-called scavengers in sufficient quantity.

Fume hood exhaust fans and Air extraction fume hoods are used as lab air ventilation systems that extract dangerous chemical fumes which is harmful to the health from the air inside laboratories. These air ventilation systems pull and filter the air from the laboratories using fume hood exhaust fans to protect and maintain lab air quality and safety standards for the workers during their working. 304 Quality Stainless Steel Construction With/out Duct Models WxDxH: 1000x620x770 ( without internal Fan unit ) Perforated Working Area Led Light with Light Intensity Controller Fan with Fan Speed Controller Custom Built Availability

Metal fume and dust come from CNC plasma cutting is always harmful to our healthy, how to efficiently collect these pollution is always a headache to customer. 1.We offer "One-Shop service" for CNC cutting machine / Fume collection table / H-beam foundation / Dust collector for customer. 2.ProArc special design high efficiency fume collection cutting table and fume collection duct will help customer solve these issue and provide a healthy working environment in cost saving way. *CE Conformity

The PARKANEX/PARKANEX rosette is a decorative element that masks the connection between the flue pipe and the chimney. The PARKANEX chimney connection system is intended for exhausting fumes from stoves, fireplace inserts and other solid fuel heating devices. The system meets European standards, ensuring safety, maximum efficiency and comfort of use. Over 130 years of experience and the use of modern technologies make the PARKANEX system gain recognition among customers throughout Europe.

The PARKANEX/PARKANEX rosette is a decorative element that masks the connection between the flue pipe and the chimney.The PARKANEX chimney connection system is intended for exhausting fumes from stoves, fireplace inserts and other solid fuel heating devices. The system meets European standards, ensuring safety, maximum efficiency and comfort of use. Over 130 years of experience and the use of modern technologies make the PARKANEX system gain recognition among customers throughout Europe.