Front end - Import export

Mobile crushers are mounted on a self-propelled steel platform equipped with wheels, crawlers, or pneumatic pads for movement. The platform incorporates all necessary auxiliary equipment and subsystems for crusher operation. They operate independently on the mine floor. Placed at the working face, the crusher minimizes the need for truck or front-end loader transport, with planned moves occurring between one day and one week. Installation of mobile crushing plants is advantageous under specific conditions; * A clear and undisturbed geological situation, * Straight and long benches for shiftable face conveyor installation, * Long-term mine planning for various conveyors. The benefits of fully-mobile crushers include * Elimination of truck transport * Reduced personnel requirements * Avoidance of high truck maintenance costs * Decreased mine traffic * Overall improvement in mine safety.

Precision resistors are used wherever the highest standards of temperature stability, error tolerance and durability are required. Models 1164 and 1166 are available for higher loads up to 1 W. The resistors are supplied with two connections on the front end (suitable for mounting on circuit boards). The precision resistors comprise low-capacitance, low-inductance wire coils made of MANGANIN®, which are encapsulated in small plastic cylinder housings. Prior to trimming, the resistance bodies are exposed to a meticulous artificial aging procedure. This special process and trimming to approximately half of the nominal tolerance guarantee long-term stability of < 0.02% over the course of years. FEATURES: — TC ≤ 10 ppm/K —Class ± 0.02 % or ± 0.05 % —Production range from 5 Ω ... 100 kΩ —Resistance material MANGANIN® —Custom resistance values available on request —Minimum order per resistance value 10 pcs

Lithium Complex Moly is an extreme pressure lithium grease specially crafted with a lithium complex thickener. This advanced grease excels under extreme conditions, credit to its extreme pressure additives and a 3% molybdenum disulphide content. Additionally, it incorporates specific additives designed to shield equipment from oxidation, high temperatures, and corrosion. This grease exhibits remarkable resistance to water and boasts exceptional adhesion, rendering it the ideal choice for applications in wet environments and under the most demanding working conditions. Highly recommended for lubricating heavy-duty mechanisms enduring extreme loads and extended greasing intervals, particularly in the mining and construction sectors. Well-suited for lubricating sleeve bearings, hydraulic hammer bearings, open gears, fifth wheels, and front-end loader bolts. Suitable for use in a temperature range spanning from -10°C to 150°C.

Capacities from 10.000 L to 40.000L. Steel cylinderical-shaped tank. light-weight construction with self-supporting tank. Lowered centre of gravity and dished ends front and back. Construction according the latest ADR regulations class 3 fuel transport.

Capacities from 10.000 L to 24.000L. Steel grade cylindrical-shaped tank. light-weight construction with self-supporting tank. Lowered centre of gravity and dished ends front and back. Construction according the latest ADR regulations class 3 fuel transport.

Capacities from 25.000 L to 40.000L. Aluminium tank (various shapes available). light-weight construction with self-supporting tank. Lowered centre of gravity and dished ends front and back. Construction according the latest ADR regulations class 3 fuel transport. Tank made in aluminium 5182 according DIN standard. Tank is divided in 2 to 5 compartments.

Capacities from 10.000 L to 24.000L. Aluminium tank (various shapes available) light-weight construction with self-supporting tank. Lowered centre of gravity and dished ends front and back. Construction according the latest ADR regulations class 3 fuel transport. Tank made in aluminium 5182 according DIN standard. Tank is divided in 2 to 5 compartments.

Capacities from 10.000 L to 24.000L. Aluminium tank (various shapes available). light-weight construction with self-supporting tank. Lowered centre of gravity and dished ends front and back. Construction according the latest ADR regulations class 3 fuel transport. Tank made in aluminium 5182 according DIN standard. Tank is divided in 2 to 5 compartments

Capacities from 10.000 L to 24.000L. Aluminium tank (various shapes available). light-weight construction with self-supporting tank. Lowered centre of gravity and dished ends front and back. Construction according the latest ADR regulations class 3 fuel transport. Tank made in aluminium 5182 according DIN standard. Tank is divided in 2 to 5 compartments. Electric driven pump, powered by a Li-ion battery pack for silent operation in domestic areas.

Compur Statox 502 Control - and Common Alarm Module The All – Rounder in Gas Detection No matter if you want to detect toxic or combustible gases: This control module works with any sensor head. It provides the power supply and processes the signal. Three highly rated relays and a 4 – 20 mA output are the interfaces to peripheral instrumentation. Potential front ends may be the Statox 501 or Statox 505 transmitters with electrochemical or infrared sensors, or sensor heads with a Wheatstone bridge signal such as Statox 501 PID, catalytic or the Statox 501 LC and MC series with infrared sensors. Just by the push of a button you can program the module to handle 4 – 20 mA sink or source. Even the bridge voltage can be set to any value between 2 and 5.2 V, it even works with sensor heads of other manufacturers. So there is no restriction at all when selecting the appropriate sensor head for you application. With its two “sense” lines it can even compensate the voltage drop in the cable for very remote sensor heads or if there are extreme temperature variations. For maximum flexibility the measuring range is user programmable. You can also select the unit, no matter if it is ppb, ppm, % LEL or % volume. Easy installation The control module is mounted on a standard DIN rail. With an optional power rail you can interface the 24 V DC power and the alarm signals. This way you can program one of the modules to operate as a common alarm module. Even this function can be programmed just by push button. The application of a control module as a common alarm module is a very useful feature. It displays when any of the modules goes into Alarm 1, 2 or system alarm, and controls peripheral alarm devices. All electrical contacts are located easily accessible on the front side. The terminals for alarm signals, analog output, sensor head connection run into 6 pluggable terminal blocks. This makes not only the first installation quick and easy, but also any service event or system modification. A module can easily be removed out of its row, without interrupting its neighbors or disconnecting wires. Intuitive User Interface You want a gas detection system that needs little or no attention. No matter if setting the initial parameters or performing scheduled calibrations or proof tests: The handling shall be safe, quick and easy. The password - protected Statox 502 software structure is so clear that most menu items are self - explanatory. The “Reset” button brings you time back into the measuring mode at any time. Even if you have to interrupt your work and forget to reset, the watchdog function returns the system into the measuring mode, if no button has been pushed for a while. Functional safety paired with utmost system flexibility The Statox 502 complies with the standards DIN EN 61508 and 61511 functional safety, level SIL 2. In context with the HRC or ARE sensor heads you can create a complete gas detection system for combustible gases complying with SIL 2 standard. In larger installations signals of gas detectors often run into SIL certified process control systems, in smaller plants there is a need for a control module complying with SIL requirements. As any combination sensor head / control module forms a complete gas detection system, this system closes the gap. It is expandable without limits, and there is no restriction to the mix of sensor heads connected. Connecting other front ends The versatility of the Statox 502 does not end with gas detection. You can connect any front end providing a 4 – 20 mA analog signal or a Wheatstone bridge signal. So you can create your own compact control system for a variety of sensors with just one type control device. Accessories Useful accessories such as calibration adapters, intrinsically safe repeaters, Power supplies etc. complete the system. 205 VAC, 8 A min. make or break power >/= 12 V, 10 mA, contakte silver / nickel

De Smet Engineers &amp; Contractors has performed numerous studies and audits related to agro-industrial plants implementation, restructuring and energy efficiency improvement ranging from simple advice to fully detailed studies. DSEC is also capable of providing investors with Conceptual Engineering, Front End Engineering Design (FEED) and project cost estimates that are the key to projects viability analysis. Conceptual and Pre-engineering services can also be the basis of the establishment of comprehensive tender documents that can be launched on the market by project promoters. DSEC technical opinions and budgeting services are recognized by lenders and Export Credit Agencies as a reliable tool for their own analysis of a potential investment.

Through its heritage from Mr. Jean-Albert De Smet, inventor of the De Smet continuous counter-current solvent extractor, De Smet Engineers &amp; Contractors has continued to work closely with the edible oil production sector, offering the integration of all processing units and related auxiliaries from seed storage to refined oil packaging. DSEC’s understanding of vegetable oil techniques provides a unique background for the implementation of a comprehensive project, being with its definition, its construction or its operation. Edible Oils Plants construction requires a deep specialization that De Smet Engineers &amp; Contractors processes over years of experience in projects implementation around the world and a very capable team of engineers that masters every detail of Edible Oil Production as well as all the technical capabilities required. DSEC´s Contracting Services offers the client a wide variety of contractual setups from Conceptual Engineering, Front End Engineering Design (FEED) to Full Turnkey (EPC) or EPCM to adapt to every client needs.

Ethanol production plants construction requires a deep specialization that De Smet Engineers &amp; Contractors processes over years of experience in projects implementation around the world and a very capable team of engineers that masters every detail of this business as well as all the technical capabilities required. In the same way it extended its activities from oil to biodiesel some years ago, De Smet Engineers &amp; Contractors also identified bioethanol projects as a logical development of its general contracting activities where its sugar engineering experience was of utmost importance. The company has so far undertaken the construction of complete fuel ethanol plants using both cereals and sugarcane as feedstock. DSEC´s Contracting Services offers the client a wide variety of contractual setups from Conceptual Engineering, Front End Engineering Design (FEED) to Full Turnkey (EPC) or EPCM to adapt to every client needs.

InfraQuant offers an easy-to-use platform to streamline QC operations and produce analytical results of high and trusted quality. We understand that the supervisor wants a highly configurable tool, whereas an operator is looking for simplicity. That is why InfraQuant has balanced both these aims and offers an advanced configuration module as well as an easy front interface to run the daily routines. The front-end Wizard guides the operator through the analysis sequence with information messages, warnings and reminders. The Wizard ensures consistent results independent of operator skills and experience. Our philosophy is to minimise the use of the mouse and work from a “next-next-next-ok” design perspective. > Software highlights: - Runs on up-to-date windows 10 - Intuitive and easy to use without training - The choice between multiple user languages - Easy link to AnalyticTrust for easy instrument surveillance and QA - Easy link to LIMS

Application The versatile reamer for reaming longer holes and adjacent mating holes. Description Right-hand cutting reamer with expanding blades. Integral pilot with guide sleeves at the front end of the reamer. The guide sleeve provide for exact alignment between the hole being reamed and the other mating hole. Due to the unique Hunger relief grinding operation the blades have a progressively increasing clearance angle giving a soft cutting action. The adjusting nut is marked with a annular scale. One graduation of the scale corresponds to a change of the reaming diameter by 0,01 mm. The reamers are available with standard blades made of high quality special steel to ensure superior cutting performance. The reamers are also available with hard chromium coated blades. The hard chromium coating has superior hardness in combination with a low friction coefficient.

Right hand cutting solid reamers with extra long shanks. The front end of these reamers is ground to act as pilot. The cutting edges are precision ground with a gradually increasing relief angle to eliminate chattering and to permit easy and smooth chip formation. The reamers are provided with a hard chromium coating. The very hard chromium coating reduces friction, giving improved chip flow and reducing the tendency for built-up edges.

The first examples of which were built by CMC TEXPAN in the early 1990s.They are aimed at cleaning the material ow fed into the machine byremoving any possible contaminants, the density of which is higher than that of the processed wood chips, e.g. stones, sand, metals, rubber, coarser chipsetc.The principle of operation is based on densimetric separation chieved in a vibratory box. In addition to the vibration of the machine casing, the materialow is subjected to a strong, pulsating air ow, enhancing the separationeect and providing for further “dry leaning” of chips. Heavy contaminants (e.g. stones, glass, rubber and plastic) are removed from the material ow,discharged from the machine side and conveyed to further re-classication,while clean chips are discharged from the machine’s front end.

One single MiniFEB (Front End Board) allows the operation of 3 sensors parallel. The MiniFEB has an TCP/IP output protocol and can be used for many channel systems by combining with a switch. A backplane can be used for power supply and synchronisation of all MiniFEB boards. Pricing may vary depending on requested cable length and available power source.

Measurement of magnetic and electrical signals with STL's unique 26 bit ADC's For measuring electric and magnetic fields the STL's unique 26 bit ADC pioneers works in an underwater system. In addition to deployment and recovery the chain configuration by a single cable used for power and data transmission uses three or more sensors platforms are fully connected to the base station. Environmental and pressure sensors use an ultra low noise isolation preamplifier, and the analogue sensor front end is formed by 3 pairs of UEP Carbon electrodes. The 26-bit analogue to digital converter is what the digital part is based on with a novel high end performance. Geometry compensated signal output through the consequent digital signal processing provides temperature. To achieve the software alignment the tilt sensors are used to achieve the precise settings with a pair of high resolution electric field vector components.

Quality that inspires It isn’t just the price-performance ratio of MANOK that is impressive. With its incredible holding power, precision and rigidity, MANOK has already surprised many users who never would have imagined that this kind of quality could be found in a manual clamping device. In addition, you can also mount an end-stop to the MANOK in no time at all: Simply fasten the inside end-stop directly onto your machine tool table or mount a front end-stop on the face of the clamping taper. That’s it! Absolute versatile implementation MANOK is not only practical and economical, but it is also extremely versatile. For instance, the integrated actuation lever makes this possible by functioning as an additional force accumulator and acts as an anti-vibration device during milling.