Frame joints - Import export

EUROtrade S.A. Commercial Warehouses. EUROtrade S.A. Romney-Hangar steel buildings come in kit form travel all around the world. Their frame, made of joint semi-circular tubes or pillars offers a vast selection of 64 different models. Their aerodynamic design with curved surfaces, reduces to the minimum the exercised pressures, and thus allows mounting on a concrete floor with raw bolts which minimizes dramatically the cost of building works. This way, the overall budget of your investment shapes at an incredibly low level, and in combination to the very short erection time makes ROMNEY-Hangar buildings economical and attractive. EUROtrade S.A. Romney-Hangar Advantages Over 60 types of buildings Short delivery time Attractive prices Wide colour range Fast assembly from non-specialized team Immediate amortisation of the investment

Each expansion joint is tailor made. Layers of material are assembled on a frame which conforms exactly to the required profile. Bellows type expansion joints incl. or without reinforcing rings/frames. Diaphragms Expansion joints for varying cross sections and transitions. Construction from round to rectangular Construction according to drawings Non-standard high temperature seals Compound movement

The belt type is the preferred choice for large diameter ducts. Delivery available with insulation pre-installed for high temperature applications. Insulation depends on temperature level of the medium. Insulation is necessary to protect the expansion joint from abrasive media. Corners of rectangular expansion joint frames should be radiused. Delivered as open-end construction for site completion. The final splice will be made on site. The storage and installation instructions as well as the necessary adhesives are included with each shipment. Pre-assembled endless units are complete with appropriate steel components which may be in several parts depending on the size. KOREMA®’s “on-site service” is available for site supervision.

Rubber profiles and gaskets for facades are essential components used in modern building construction to ensure long-lasting performance and protection. Designed for use in curtain walls, window systems, and other exterior façade applications, these rubber products provide effective sealing against air, water, and temperature fluctuations. Made from high-quality materials like EPDM and silicone, they offer excellent weather resistance, UV stability, and elasticity, ensuring a tight and durable seal around glass panels, metal frames, and joints. Rubber profiles and gaskets for facades also help in reducing noise, preventing leaks, and enhancing the thermal insulation of buildings, making them crucial for energy-efficient and sustainable construction projects.

The manual folding mattress Relax RDR2, for a matrimonial bed for two people, is made of hardwood, multi-layered beech, which offers flexibility and resistance over time, supporting a weight of over 350 kg. The Relax RDR2 model mattress is an ideal product for people who want a high degree of comfort, thanks to the folding system, which helps you to have the most comfortable position for the spine. The folding movements of the mattress can be independent (left right side) when there are 2 mattresses or single (when there is only one double mattress). The bed frame contains 2 joints located along the length of the frame, allowing the choice of an optimal body position. In the lumbar area, the hardness of the slats can be changed with the help of a 3-step adjustment system: soft, medium or hard, depending on your preferences. This improves your blood circulation and relieves tension in your lumbar area, relaxing your back muscles.

The electrically adjustable bed frame for a single bed, model Relax RES2, is made of hardwood, beech. Made of multi-layered wood, it is flexible and supports a weight of over 200 kg. The RES2 electric lift mattress is a luxury product and can be used both while sleeping, watching movies on TV, reading or as a great necessity for people with various medical or motor conditions. The bed frame contains 5 joints located along the length of the frame, allowing the choice of an optimal body position. The motorized system is very quiet, almost imperceptible, made in Germany. The slightly curved slats are 3.8 cm wide, 0.8 cm thick and are fixed in ABS elastic supports, which have the role of absorbing the weight. The lumbar area can be stiffened by approaching the red sliders, which are mounted on the doubled slats that reinforce this portion.

The Relax RES3 mattress, electrically adjustable, is made of hard wood, beech, famous for its resistance. It supports a large weight, over 200 kg per person, because it is made of layered veneer, which gives it flexibility. Its movements can be coordinated from two wired remote controls by raising or lowering only the head parts , the feet being fixed. Thanks to the degrees of inclination, we can adjust the maximum desired level of comfort. The parts in the head area rise to a maximum of 85 degrees, the ideal position in which an immobilized patient can eat. The bed frame contains 2 joints located along the length of each part in the lumbar area of ​​the frame, allowing the choice of an optimal body position. The mattress can be raised simultaneously or independently Mattresses with latex content, polyurethane foam, or memory foam can be adapted to the RES3 mattress with electric lift. Avoid mattresses with springs or rigid ones that do not allow undulation.

The manual folding mattress Relax RDR1, for a matrimonial bed for two people, is made of hardwood, multi-layered beech, which offers flexibility and resistance over time, supporting a weight of over 300 kg. The Relax RDR1 model mattress is an ideal product for people who want a high degree of comfort, thanks to the folding system, which helps you to have the most comfortable position for the spine. The folding movements of the bed frame can be independent (left and right side), in the standard version (when two mattresses are used) or unique (when a single double, matrimonial mattress is used). The bed frame contains 2 joints located along the length of the frame, allowing the choice of an optimal body position. In the lumbar area, the hardness of the slats can be changed with the help of a 3-step adjustment system: soft, medium or hard, depending on your preferences. This improves your blood circulation and relieves tension in your lumbar area, relaxing your back muscles.

Pallet racking from SCHULTE Lagertechnik is the optimum solution for storing heavy items. In the pallet racking, pallets can be stored either horizontally or vertically. — High shelf loads up to 4,450 kg and bay loads up to 24.5 t as standard — Single-piece frame profile up to 12 m high — Height of beams can be adjusted in increments of 50 mm — Structural analysis in accordance with EN 15512 — Placing and removing items using storage and retrieval systems and industrial trucks — Particularly stable with framework strutting in the frames — High length and joint rigidity through cold-formed box profiles with welded brackets — Intermediate heights of the frames and intermediate lengths of the beams can be supplied — Long-term planning security thanks to standard frames — Easy to erect by simply hanging in the beams — System accessories for optimum storage of flat pallets, pallet cages and other loading aids thanks to system accessories

Universal deck form PSK-CUP combines the functions of deck form and scaffolding. The deck form PSK-CUP corresponds to the space frame which forms the rigid frame without joints which does not require additional stabilization by diagonal connections in most cases. It is assembled from the tubular members: vertical and horizontal, lower threaded lifting jacks and upper threaded uniforks, connection elements, it may be completed with fixation elements. Vertical elements are the basic bearing components of the framework on vertical plane. There are six basic dimension. They are joined with the help of connection elements according to the principle “tube-in-tube”. In every 500 mm the vertical elements have welded cup connections – “lower cup” produced from the high-quality steel, with the attached mobile cups – “upper cup” produced from ductile casting. They provide support for horizontal elements. The horizontal elements provide the framework rigidity.