Fork lifts - Import export

BATTERY LIFTER FOR BOXES AND REELS FP PS 04 E - LOAD 400 kg Lifter with manual pushing and lifting with electro-hydraulic pump, allows to lift loads (axis, bags, containers, minipallet, etc.) with maximum weight of 400 kg up to a height of mm. 1510. The elevator FP PS 04 E is compact and easy to handle. Is equipped with polyurethane wheels of large diameter for a high smoothness (two fixed and two steerable complete with brake). It is supplied with loading forks with a length of 650 mm. The battery 12 V-80 Ah. without maintenance, combined with the robust engine and control electronics with overload protection ensures safe and reliable operation. The battery charger is integrated.

TILTING BUCKET IN POLYETHYLENE FP-BE 1000 WITH CAPACITY 1000 LT. Tipping container made of sturdy polyethylene and forkable steel base with forklift truck, it allows the transport and unloading of scraps and scrap operating in safe conditions. The bucket is secured to the forks of the forklift truck by means of the supplied chain and to carry out the overturning it is sufficient to operate the release lever directly from the driver's seat of the forklift truck (by means of a rope) and therefore to operate in maximum safety. The tipping container is complete with polyurethane wheels with brake and gas shock absorbers to control the tipping speed Features - Rotational molded monobloc container (robust, handy and light) - Double wall with cavity, smooth interior and rounded edges - Reinforced base with ribs - Forked structure built with galvanized steel - N° 2 gas shock absorbers and end-of-stroke device for progressive tipping - N° 2 fixed wheels and 2 swivel wheels with brake

MANUAL BOXES AND REEL LIFTER FP PS 04 - LOAD 400 kg Compact and easy to handle manual forklift equipped with hydraulic foot pump and large diameter polyurethane wheels for high smoothness (two fixed and two steering complete with brakes). It is supplied with 650 mm long loading forks. The lifting pedal can be positioned vertically to reduce its overall dimensions and the descent is controlled by a valve with handwheel.

In Europe,50% pallets are under 300kg weight. To replace hydraulic pallet truck when under 300kg load. Pallets are simply lifted by pulling the handle backwards (the leverage principle). Saves a lot of time as no pumping is required. It differs from standard pallet trucks as completely mechanical and devoid of hydraulic system. Thanks to the low weight, the mechanic lifter can easily be carried to other floors, put into a truck or a car. Foldable.when not in use, it can be hung up on a hook on the wall. No hydraulic pump to repair, no oil can leak out,no seals to replace. Ideal for grocery stores, all kind of small stores, pharmaceutical industry, drugstores, offices, schools, hospitals etc.

MANUAL LIFTER FOR PALLETS MOD. FP SDJA 1016 with adjustable forks - shipped fully assembled! Pallet lifter with hydraulic foot pump and rudder (for low weight can use the pedal), steel frame with fork tip rounded, directional nylon wheels with brakes and double rollers, forks with adjustable width. Caution: the front supports have fixed width standard of 570 mm. WARNING: all the elevators are shipped pre-assembled, tested one by one before packing in a professional manner and with CE certification. The elevators FPSDJ are very practical and robust, recommended where the paving is smooth (eg warehouses) where the occasional and not continuous lifting of pallets does not justify the purchase of a battery model. The structure and operation are similar to those of a standard pallet truck. You can lift the load both through rudder or pedal. For each pumping the forks are raised about 3 cm The descent is done by pressing the lever on the rudder.

TIPPING CONTAINERS Tipping containers in steel sheet painted watertight, with the base fork mounted for lifting with a forklift. They are supplied in series with settling tank, filter sheet for the separation of liquids or solid substances and cap for the discharge of liquids. The reversal is automatic and is done via the release lever. A rope is used to activate the lever directly from the cab of the truck and then to operate in maximum security. All containers are equipped with wheels for manual handling. On request they can be equipped with feet.

The hook for forks MKFP 100 is made from a sturdy steel frame suitable for insertion of forks with section max. mm. 135x50, screws for locking to the forks and lifting swivel hook fitted with a safety lock. The fork hook allows you to safely lift loads up to 1000 Kg. Before purchasing it is essential to make sure that your lifter is certified to raise up 1000 Kg, considering installing this hook at about half the length of the forks.

Moving solutions for all who need to transport or lift an object but have no fork lift or crane available Our Lift Trolleys, Lift Tables and Box Tilters will not let you down.

Available for following automatic cutting machines: Profilma 250, 500 E, 510 E, 600 R Top loading by crane or fork lift Max. bundle Ø 650 mm Max. load 4.000 kg Bar length 3.000 – 6.200 mm Pneumatic gripper for good feeding of the profiles

Collects swarf and chips in a 1000 litre container can be dumped easily by fork lift. Motor-driven top opens automatically 2 hoods Ø 100mm – without pipe Powered by 4,0 kW, 400 V, 50 Hz motor Performance 4.300 m³/Std. incl. ventilating worm casing above the extractor Large filtre with big surface and external filtre shaker for long durability Steady-state performance or controlled by saw Noise level: 80 db/A Dimension 180 x 320 x 165 cm Weight 380 Kg Serial Paint: RAL 7016 / 9016

Stackable and suitable for forks lift. Available in industry version (industrial gray) or food version (RAL 7001). Ideal for textile industry, pharmaceutical industry, metalworking, plastics processing and food industry. Easy to clean, does not absorb odors and moisture. Storable outdoors. Available with feet, runners or wheels. Are movable with pallet trucks and forklift. The bins can be ordered with 4 legs, runners and 4 wheels without brakes. The version with 4 wheels without brake can be transformed into the version with 2 or 4 wheels with brake by purchasing the relative accessory. This is only a surcharge that must be applied to the bins that already has wheels (it cannot be applied to the bins with the feet).

Stackable and suitable for forks lift. Available industry version (industrial gray) or food version (RAL 7001). Ideal for textile industry, pharmaceutical industry, metalworking, plastics processing and food industry. Easy to clean, does not absorb smells and humidity. Storable outdoors. Available with feet, runners or wheels. Are movable with pallet trucks and forklift. Approximate weight 17 kg. The bins can be ordered with 4 legs, runners and 4 wheels without brakes. The version with 4 wheels without brake can be transformed into the version with 2 or 4 wheels with brake by purchasing the relative accessory. This is only a surcharge that must be applied to the bins that already has wheels (it cannot be applied to the bins with the feet).

The Coilprotect Premium is a further development to the already existing Coilprotect Semi. The second set of stake enables an even closer stake out, especially for narrow slit strips. The coil tray can be equipped with a coil hook and coil tongs. A fork lift assebly must be checked by the customer due to the greater width of the coil tray. secutex Coilprotect are coil cradles made from sturdy steel and are constructed for the longterm storage of coils. secutex Coilprotect is loaded using coil hooks, coil tongs or forklift trucks.

STURDY BIG BAG HOLDER Big Bag lifting beam with 2000 kg capacity suitable for lifting and handling the classic Big Bags 90x90x120 cm. The grip of the big bag is very safe and takes place by hooking it on the 4 corners. The lifting beam can be installed on the forks of a lift truck by placing it in the appropriate seats or it can be used with a crane or bridge crane.

Unbreakable and professional containers used in food service and industrial. Colour Grey. Available with or without front door. Stackable and suitable for forks lift. Available in industry version (industrial gray) or food version (RAL 7001). Ideal for textile industry, pharmaceutical industry, metalworking, plastics processing and food industry. Easy to clean, does not absorb odors and moisture. Storable outdoors. Available with feet, runners or wheels. Are movable with pallet trucks and forklift. * Door Dimensions 782x40x236 mm h The Model 700 PLUS is available in: - Technical Grey - Food RAL 7001 - Standard without door opening (SP version) - With door opening (version PC) The bins can be ordered with 4 legs, runners and 4 wheels without brakes. The version with 4 wheels without brake can be transformed into the version with 2 or 4 wheels with brake by purchasing the relative accessory.

Our 500 kVA canopy diesel generator hire service offers cost-effective, reliable power. Whether you have a planned or emergency power project, our 500 kVA generators will get the job done. Data is based on 50 Hz. For more information please request a data sheet. Generator shown may not be representative of equipment available at the time. EU emissions compliant to the Stage IIIA standard for Non-Road Mobile Machinery (NRMM). Super-silent sound attenuation levels without compromising performance. Fork lift pockets for easy loading and unloading with hiab vehicles. Tough but light-weight steel canopy enclosure. Simple controls and connections. Each generator package can include fully-bunded fuel tanks. Unique particulate filtration units can be fitted to most generators to dramatically reduce particulate matter. 24/7 Aggreko Remote Monitoring. Ideal for sites where emission reduction is a priority or environmental controls are in place.

Our 320 kVA canopy diesel generator hire service can assist with your planned or emergency power generation requirements. From construction sites to festivals, railways to power plants - a 320 kVA generator offers flexible, portable power. Data is based on 50 Hz. For more information please request a data sheet. Generator shown may not be representative of equipment available at the time. EU emissions compliant to the Stage IIIA standard for Non-Road Mobile Machinery (NRMM). Super-silent sound attenuation levels without compromising performance. Tough but light-weight steel canopy enclosure. Simple controls and connections. Fork lift pockets for easy loading and unloading with hiab vehicles. Each generator package can include fully-bunded fuel tanks. Unique particulate filtration units can be fitted to most generators to dramatically reduce particulate matter. 24/7 Aggreko Remote Monitoring. Suitable for sites where emission reduction is a priority or environmental controls

Our 125 kVA canopy diesel generator hire service can assist with your planned or emergency power generation requirements. If you need portable and reliable power, we'll rapidly deliver and install our 125 kVA generators to get you up and running in no time. Data is based on 50 Hz. For more information please request a data sheet on our 125 kVA diesel generator. Generator shown may not be representative of equipment available at the time. EU emissions compliant to the Stage IIIA standard for Non-Road Mobile Machinery (NRMM). Super-silent sound attenuation levels without compromising performance. Tough but light-weight steel canopy enclosure. Simple controls and connections. Fork lift pockets for easy loading and unloading with hiab vehicles. Fully-bunded fuel tanks available, to reduce the risk of fuel leakage. Unique particulate filtration units can be fitted to most generators to dramatically reduce particulate matter. 24/7 Aggreko Remote Monitoring.

Because the units carry the label made in Germany you can be sure that you are buying a top-quality, highly efficient and extremely reliable heating unit which will carry on heating in the most hostile of environments and harshest of conditions. Theres also an electronically-controlled multistage switch to regulate air flow and air temperature so that you can carry out blasting, coating and painting work in fact almost any surface work at all - at a constant temperature both indoors and out. Here the low-down on the TEH 300: Heating performance: 80 kW Air flow rate: 6000 m³/h Mains voltage: 400 V Power: 123 A Power socket: CEE 125 A plug Mobility: wheelable/ fork lift / crane Sound level (distance 3 m): 76 dB (A) Air pressure: 600 Pa Temperature increase ΔT: 60 °C Length: 1.625 mm Width: 800 mm Height: 1.245 mm Weight: 245 kg Some of the TEH 300s abundant qualities: Extremely robust top-quality product "made in Germany" Stackable

Because the units carry the label made in Germany you can be sure that you are buying a top-quality, highly efficient and extremely reliable heating unit which will carry on heating in the most hostile of environments and harshest of conditions. Theres also an electronically-controlled multistage switch to regulate air flow and air temperature so that you can carry out blasting, coating and painting work in fact almost any surface work at all - at a constant temperature both indoors and out. Here the low-down on the TEH 200: Heating performance: 40 kW Air flow rate: 3,000 m³/h Input voltage: 400 V Power consumption max.: 61 A Fuse protection / plug: 63 A / CEE 63 A, 5-pin Mobility: wheelable/ fork lift / crane Sound level (distance 3 m): 75 dB (A) Air pressure: 600 Pa Temperature increase ΔT: 60 °C Length: 1,625 mm Width: 800 mm Height: 1,270 mm Weight: 230 kg

Our 350 kVA canopy diesel generator is quick and easy to install, so we'll get you up and running in no time. Whether you have a planned or emergency power project, our 350 kVA generator hire service will give you cost-effective, reliable power - every time. Data is based on 50 Hz. For more information please request a data sheet. Generator shown may not be representative of equipment available at the time. EU emissions compliant to the Stage IIIA standard for Non-Road Mobile Machinery (NRMM). Super-silent sound attenuation levels - no compromise on performance. Durable, light-weight steel canopy enclosure. Simple controls and connections. Fork lift pockets for easy loading and unloading with hiab vehicles. Fully-bunded fuel tanks are available. Unique particulate filtration units can be fitted to most generators to dramatically reduce particulate matter. 24/7 Aggreko Remote Monitoring. Suitable for sites where environmental controls are in place or emission reduction

Mobile and flexible in combination with a fork-lift truck or forklift The verifiable load receptor iL Special 3000U/MP offers you a broad spectrum of weighing ranges: With its compact and practical U-shaped design it weights pallets ranging from 600 kg to 3,000 kg – also as dual interval. Combined with an iS weighing terminal the system reliably fulfills the functions weighing, counting or filling. Specifically for filling systems we are offering you a model with wider dimensions. Benefit with iL Special 3000/MP from time-saving processes, e.g. easy filling. The version with conveying unit allows mobile applications such as via pallet truck – back-friendly and without major physical effort. A battery pack makes you independent in terms of power supply.

ELEVATOR WITH MANUAL TIPPING FRONT A 85° FPLTM10M The elevator-tilter for dump boxes with hydraulic pump driven by the rudder allows operators to lift and fold up to a maximum of 85° each type of fork mounted container (plastic, metal, wood) and to withdraw/deposit products with maximum safety. The height of a pick-up is about 1000-1200 mm. (Depends on the level of tipping) and allows operators to maintain an ergonomically correct position. The trolley is equipped with a lever valve with two positions (lifting and tilting) Placing the lever on the lifting forks are raised horizontally up to 285 mm. from the floor, by positioning the lever on the opposite side starts tilting gradual up to a maximum of 85 °. Sturdy steel frame with fork tip rounded, steering wheels in polyurethane with parking brake and foot protectors.

Our 45 kW commercial electric heaters have a high specification to allow accurate temperature control on any heating project. From heating a temporary venue, to drying out a building - our heater hire packages can help. Tough design for rental applications. Digital display makes it easy to control heat levels. Portable with heavy duty castor wheels, fork pockets and lift eye points. Can be internally or remotely thermostatically controlled. Provides precision control of temperature settings. Ideal for both indoor and outdoor industrial applications. Can be used for either largescale or localised temporary heating. Can be used for HVAC applications, as well as industrial or construction applications - wherever warm air is required.

Our 42 kW heavy-duty, industrial electric heaters will keep your operations running and your projects on track. From heating a temporary venue, to drying out a building - discover how our electric heater hire packages can help. Tough, portable design. Easy to manoeuvre with heavy duty castor wheels, fork pockets and lift eye points. Remote thermostatic control if required. Provides good airflow over long distances. Suitable for commercial use and both indoor and outdoor applications. Ideal for either largescale or localised temporary heating. Can be used for HVAC applications, as well as industrial or construction applications - wherever warm air is required.

METAL CONTAINERS WITH OPENABLE BOTTOM - MOD. FP B637/638 Very robust metal containers, suitable for the collection of processing waste and building materials. The CP-CT containers allow to be lifted with the forks of the forklift or with the 4-branch chains, depending on the model and arrangement. The operator can open the bottom of the body by using a rope and remaining at a safe distance. The openable bottom allows you to empty the container comfortably and quickly in larger containers or specific areas for disposal. Built in painted steel. All standard models are wheelless. The 1000 liter series can be equipped with wheels and cover.

The H1 Euro pallet is the version of the EURO H1 without central box retainers. The food-safe plastic pallet is ideal for applications that require maximum hygiene. Dimensions L x W x H: 1200 x 800 x 160 mm Weight: 18,0 kg Material: HDPE Load capacity: static 5000 kg, dynamic 1250 kg, in racking system 1000 kg Colour: light grey Runners: 3, welded Rim: 7 mm All runners have chamfered edges on both sides for ideal use with fork lift trucks Option: — Rim options: 7 mm — Palgrip® anti-slip runners — Reinforced runner plates

The H1 recycled Euro pallet offers the proven H1 design in first-class regranulate quality. The robust plastic pallet is particularly convincing thanks to its high bending strength. Dimensions L x W x H: 1200 x 800 x 160 mm Weight: 16,5 kg Material: HDPE Load capacity: static 5000 kg, dynamic 1000 kg, in racking system 1000 kg Colour: black Runners: 3, unwelded Rim: 7 mm All runners have chamfered edges on both sides for ideal use with fork lift trucks Option: — Rim options: 7 mm — Palgrip® anti-slip runners — Reinforced runner plates

The CS3 industrial pallet is designed for universal use and - thanks to a variety of equipment options - a true allrounder for use in many different sectors. With its almost completely closed top deck, this multitrip pallet is ideal for handling bagged goods, cardboard boxes, as well as packaged goods in both food and non-food sectors. Dimensions L x W x H: 1200 x 1000 x 150 mm Weight: 16,0 / 18,0 kg Material: PE Load capacity: static 5000 kg, dynamic 1250 kg, in racking system 400 kg (unwelded runners) / 800 kg (welded runners) Colour: basalt grey Runners: 3, welded or unwelded All runners have chamfered edges on both sides for ideal use with fork lift trucks Option: — Welded runners — Rim options: Without, 7 mm, 22 mm, 22 mm outside — Reinforcement profiles for a load capacity of 1.400 kg in high rack — Palgrip® anti-slip runners — RFID transponders