Results for
SAMSYS GMBH
Germany
The OnRobot force-torque sensor provides accurate force and torque measurement along all 6 axes. This gives you precise control during difficult assembly, polishing, grinding or deburring. In addition, the HEX software offers path recording, force control and special functions for insertion. This reduces the integration time for your production line. Our sensors are suitable for most of the industrial robot arms currently in use. Common applications are polishing, grinding, deburring and assembly. They can also be used for teach-in applications and collision detection. Currently available models: HEX-E – High precision, HEX-H – Low deformation, HEX-E QC, HEX-H QC Seamless integration into the robot of your choice. For example Universal Robots, Nachi, Doosan, Yaskawa, TM Robot, Kawasaki, ABB, Kuka, Hanwha, Fanuc.
Request for a quoteCLA CLINICAL LABORATORY AUTOMATION SA
Switzerland
In order to measure torque and force, a large range of sensors is available. All these sensors are bidirectional, inductive or resistive type with a good linearity and negligible hysteresis. These sensors allow to measure torque less than 1 uNm and up to 1 Nm.
Request for a quoteCLA CLINICAL LABORATORY AUTOMATION SA
Switzerland
The Digimes Universel is a 5 KHz carrier current bridge for resistive, inductive or differential transformer transducers connected in full or half bridge. The sensitivity is adjustable by the user between 2 mV/V and 100 mV/V according to six measuring ranges. Gain and offset can be adjusted with potentiometers to allow calibration of the sensor. There is also the Digimes Compact, dedicated to one sensor.
Request for a quoteCLA CLINICAL LABORATORY AUTOMATION SA
Switzerland
The CLA TSF-000 through TSF-5 are bidirectional, inductive type torque sensors. The measurement system is composed of an axis mounted on flexible pivots with cruciform springs allowing frictionless torque measurement. The axis rotation angle measurement, which is proportional to the measured torque, is performed via an inductive displacement sensor with carrier frequency. The small rotation angle, approximately 1° for all measurement range, allows very good linearity and negligible hysteresis.
Request for a quoteCLA CLINICAL LABORATORY AUTOMATION SA
Switzerland
The CLA LC-01 and LC-1 are bidirectional, inductive type force sensors. The measurement system is composed of a displacement transducer which mobile core is linked to two leaf copper beryllium springs. The spring flexion measurement, which is proportional to the force to be measured, is performed by inductive sensor with carrier frequency. The measurement shaft is interchangeable, allowing the use of special shaft.
Request for a quoteCLA CLINICAL LABORATORY AUTOMATION SA
Switzerland
The CLA SC-002 is bidirectional, resistive type force sensor. The measurement system is composed of a semiconductor strain gage. The measurement shaft is made of a 0.5mm diameter axis with a positioning notch for calibration and measurement. The design of that sensor is specially made for a high resonance frequency.
Request for a quotePPS (PRESSURE PROFILE SYSTEMS)
United Kingdom
The FingerTPS is a set of wearable finger sensors that enable you to measure grip, touch, and other hand forces. A more affordable alternative to the TactileGlove, this easy-to-use system captures high-quality data in a natural and organic form-factor. **Finger selection can be customised to specification** Features: Design or research with accurate, sensitive and repeatable data even for complex finger geometry. Comfortable and minimally-intrusive system allows for full range of motion and ensures natural hand manipulation research. Plug and play—no configuration needed. Just place on the hand, calibrate the sensors and Chameleon auto-detects your hand configuration. Compact wireless Bluetooth electronics provides simple and easy to use set-up, with minimal wires. Connect two wrist assemblies at the same time for two handed operations.
Request for a quotePPS (PRESSURE PROFILE SYSTEMS)
United Kingdom
The CTA TactileHead is a width adjustable pressure measurement and mapping system for quantifying pressures exerted by headphones, earmuffs, headbands, and more on various head sizes. A high-resolution Conformable TactArray sensor is molded onto the curved area around the ear of the mannequin head, while another high-resolution TactArray sensor is mounted to a flat plate on the other side of the head to provide a controlled comparison. Chameleon, our real-time visualization and acquisition software, is then used to display pressures from both sensors simultaneously and to perform real-time analysis for evaluating comfort and fit.
Request for a quotePPS (PRESSURE PROFILE SYSTEMS)
United Kingdom
The PPS TactileGloves are tactile pressure sensor gloves with embedded sensing elements throughout the palm and fingers, allowing for natural and accurate testing of pressures applied to and exerted by the hand. Nearly any hand operation can be measured accurately through the 65 individual highly sensitive sensing elements within each glove. Sensor Glove Features: Ensure a natural test environment with the only glove hand sensor on the market User friendly, comfortable to wear and no adhesives or wires to get in your way High-resolution, sensitive sensors detect even the lowest pressures (0.1oz/3g) Meant to handle the real world. It's wireless and battery powered. Delivered in pairs (Left + Right). Available glove size: small, medium, and large.
Request for a quotePPS (PRESSURE PROFILE SYSTEMS)
United Kingdom
The TactileMat is a rigid and robust pressure sensing pad that is of the largest, high-resolution pressure mapping sensors on the market. The use of a large area sensor like the TactileMat allows you to capture dynamic pressure over a larger area without the dead zones typically associated with trying to use multiple smaller sensors side-by-side. This is one of the largest pressure mats on the market. Key Features Large pressure mapping surface area (220 mm x 450 mm) Rigid, robust, and can be built in various full scale ranges (FSR) up to 188 psi FSR Waterproof IP53+ (Can be special ordered to higher water-proofing upon request) Slim construction (7.69 mm) with a non-slip base Array Size = 44 x 90, element size = 5 mm x 5 mm
Request for a quotePPS (PRESSURE PROFILE SYSTEMS)
United Kingdom
The RoboTouch patented capacitive tactile sensing technology is the highest performance embedded tactile sensing technology for giving industrial and consumer robotic grippers or Humanoid robots the “sense of touch”. It is based on Digitacts sensor technology that features embedded digital output ideal for OEM integration into the gripper. The sensors comprise of multiple sensing pads, each typically with 12-24 sensing elements, which can be placed on any location of choosing in the gripper. Data from sensors are transferred to grippers via I²C or SPI digital interfaces, enabling you to easily integrate the sensors into your grippers.
Request for a quotePPS (PRESSURE PROFILE SYSTEMS)
United Kingdom
We have been an innovator and partner to numerous successful medical projects over the past 20 years. Our patented technology enables new possibilities in the medical space, and our team has the experience and expertise to effectively integrate tactile sensing for breakthroughs in medical advancement. Whether you are looking to simply integrating our sensors for data capture, or looking for an agile, knowledgeable partner to take you from concept to creation, we’re here to help. Examples: PULSE DEVELOPMENT KIT - Measure and analyze pulse waveforms SURETOUCH - An FDA approved, radiation-free, breast lesion detection system MANOSCAN - A high-resolution esophagus catheter WRIST-AID - A non-invasive carpal-tunnel-syndrome treatment device
Request for a quotePPS (PRESSURE PROFILE SYSTEMS)
United Kingdom
A sensitive, waterproof capacitive tactile sensor array designed to capture instantaneous and actionable spray pattern and spray pressure data generated by sprayed fluids or gases. Capture spray distribution and impact pressure and accurately identify the location and pattern where sprayed fluid or gases land. Available in two application variants, Spray Pressure or Spray Pattern, and optimal for use in situations where spray pressures are infinitesimally small.
Request for a quotePPS (PRESSURE PROFILE SYSTEMS)
United Kingdom
The Stretchable TactArray is a flexible pressure sensor pad engineered from a soft and conductive silver-metalized Spandex. The Stretchable TactArray can stretch up to 10% and be folded in multiple directions while still maintaining high data quality. This sensor is approximately 3-7 mm thick and is best suited for dynamic curvature applications such as seats, horseback saddles and other applications where sensor thickness is not an issue. Key Features Stretch this sensor up to 10% while maintaining accurate data Can be used on objects with dynamic, multi-directional curvature (e.g., heads, spheres, computer mouse) Ideal for applications where the sensor will be flexed or deformed through use, such as seat cushions, mattresses, or clothing Capture high quality pressure data between pressures of 5 psi to 50 psi and within temperature ranges of –20° to 50°C Comes standard with Chameleon Visualization Software, and is available in many sizes and configurations
Request for a quotePPS (PRESSURE PROFILE SYSTEMS)
United Kingdom
The Industrial TactArray is a flat sensor that can capture and map pressure distribution in even the most extreme conditions. Constructed from high-quality Kapton or Polyimide, the Industrial TactArray can pressure distribution of up to 700 psi and in temperatures between -40° C and 200° C. This system is best suited for use in applications requiring tactile sensors that can withstand extremely high temperatures and pressures—like heat presses, brake pads, and nip rollers. Key Features High-resolution sensor arrays can measure pressure distribution at levels of up to 700 psi and retain performance characteristics in temperatures between -40° C and 200° C Real-time thermal compensation ensures accurate measurements even under changing temperature conditions Ultra-thin construction, 0.3 mm thick, and high-resolution sensing elements Can accommodate moderate flexing and bending Available in multiple sizes and configurations Chameleon Visualization Software included
Request for a quotePPS (PRESSURE PROFILE SYSTEMS)
United Kingdom
The Conformable TactArray is a ~1mm thick flexible sensor constructed from soft, conductive cloth and captures pressure distribution between two objects in direct physical contact. The Conformable TactArray can accommodate varying degrees of curvature and can output accurate, repeatable data even while wrapped around irregular shapes. Key Features and Benefits: Maintain high-resolution and capture quality data even around complex shapes High resolution, sensitivity, and repeatability allow for consistent capture of accurate data The sensors can capture a minimum sensing pressure of 10 Pascal Save time and improve results through repeatable accuracy and less recalibration time needed Available in a wide range of size configurations, pressure ranges, and resolutions Comes standard with the powerful Chameleon Visualization Software
Request for a quoteTEST GMBH
Germany
The small dimensions of the hydraulic force transducers of the model series TesT 1001 / 1011 / 1021 as well as the flat building method permit versatile applications. The small transducers were conceived for occasional control measurements, e.g. for adjusting or service work. The indicating instruments of model versions 1001 and 1011 have a diameter of 63 mm. The indicating instrument of model version 1021 can have a diameter of 63 mm or 100 mm. All model versions possess a drag indicator to display peak values.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
FRIEDRICH VOLLMER FEINMESSGERÄTEBAU GMBH
Germany
Precise even with low strip tension The segment rolls were developed specially for use in stretch bending levellers. The extremely free-running measuring rings permit high-precision shape measurement even with very low strip tensions. A rigid tubular section which forms the shaft of the roll supports several pivotably mounted measuring rings. They form the outer shell of the measuring roll over which the strip passes. Force sensors inside the measuring rings detect the force resulting from the strip tension. The sensors have high resolution, are overload-proof and maintenance-free. The data are transmitted through the centre axis of the roll and output as a Profibus signal.
Request for a quoteEMSYST
Slovakia
Universal membrane force sensor for general use. The load to be measured is applied via external threads. Suitable for use in manufacturing plants as well as in laboratories and testing. Range: from 50 N up to 5 kN Force dir: Tension / Compression Version EMS21 has built-in signal conditioner with voltage or current output.
Request for a quoteEMSYST
Slovakia
Portable display unit for force (weight, torque, pressure) measurement with ability to record data. Communication with PC via USB interface.
Request for a quoteEMSYST
Slovakia
Supported Analog Outputs: - voltage: 0 .. ± 10 V, 0 .. ± 5 V, 5 .. ± 5 V - current: 4 .. 20 mA, 12 .. ± 8 mA 24 VDC Power supply Built-In Electronic Filter DIN Rail Mounting
Request for a quoteEMSYST
Slovakia
Extremely high load sensor with good metrological properties. Range: from 500 kN up to 3 MN Force dir: Tension / Compression
Request for a quoteEMSYST
Slovakia
Precise force sensor, not sensitive to lateral forces, well suited for testing. Range: from 1 kN up to 500 kN Force dir: Tension / Compression
Request for a quoteEMSYST
Slovakia
Version EMS111 has built-in signal conditioner with voltage or current output. Range: from 200 N up to 10 kN Force dir: Tension / Compression
Request for a quoteEMSYST
Slovakia
Robust type load cell with a wide capacity range designed for universal use. Range: from 100 N up to 500 kN Force dir: Compression Version EMS51 has built-in signal conditioner with voltage or current output.
Request for a quoteEMSYST
Slovakia
Universal membrane load cell with robust construction is suitable for industrial use. The force must be applied in the axis of the sensor. Range: from 1 kN up to 50 kN Force dir: Tension / Compression Version EMS41 has built-in signal conditioner with voltage or current output.
Request for a quoteEMSYST
Slovakia
Universal membrane force sensor for general use. The load is applied via external threads. Range: from 100 N up to 5 kN Force dir: Tension / Compression
Request for a quoteBURSTER PRÄZISIONSMESSTECHNIK GMBH & CO KG
Germany
The force to be measured must be introduced axially and perpendicularly to the entire surface of the inner and outer bands of the sensor in the opposite direction. Conversion of the acting force into an electrical output signal is performed by strain gages connected together in a full bridge circuit. To achieve optimal accuracy, the base of the sensor should rest on a smooth level surface, hardened to at least ≥ 58 HRC with sufficient dimensions. The base cover welded to the surface has a stabilizing effect on the sensor element. Lateral forces must be avoided anyway as they distort the measured results. Tension and bending relief for the sensor cable is to be carried out on the machine side. FEATURES: — Measuring ranges from 0 ... 100 N to 0 ... 200 kN — Centric throughout hole — Flat disc design — Made of stainless steel — Completely welded sensor body — Nominal characteristic value standardization possible — burster TEDS optionally available
Request for a quoteBURSTER PRÄZISIONSMESSTECHNIK GMBH & CO KG
Germany
The force measuring chain is an universal reference measuring chain for the calibration of press-fit force measuring equipment. It finds applications in the quality assurance, commissioning and equipment monitoring fields. A DAkks calibration certificate is included so that the force measuring chain can be traced back. The calibration is traceable through accreditation at the German Accreditation Body. The calibration certificate records the displayed values for mounting positions at 0°, 120° and 240°. During calibration in field, the reference load cell is inserted in line with the flux of the press-fit measuring equipment. The force application is of central significance here for the quality of the measurement. Special force application parts are required, so that the line of action of the force agrees as exactly as possible with the geometrical axis of the load cell that is to be measured (central loading).
Request for a quoteResults for
Force sensors - Import exportNumber of results
59 ProductsCountries
Company type
Category