Flat steel- stainless - Import export

These are the dowel used in filtration system.

Stainless steel tubes 1.4301 304L 1.4404 316L 1.4571 316TI, 321, 1.4541 Stainless steel round bars 1.4301 1.4404 1.4571 1.4541 1.4021 1.4006 1.4104 Welded and seamless stainless steel tubes 904L 1.4539 UB6 - Full stainless steel round bars UB6 904L 1.4539 Refractory tubes and round bars 309 1.4828 1.4833 310 310S 1.4841 1.4845- Duplex tubes UNS S31803 1.4462 Super duplex tubes UNS S32750 S32760 1.4410 1.4501 Duplex super duplex full round bars 1.4462 1.4410 1.4501 Stainless steel sheets 1.4301 304L 1.4404 316L 1.4571 316TI, 321, 1.4541 Refractory sheet 309 1.4828 1.4833 310 310S 1.4841 1.4845- Duplex sheets UNS S31803 1.4462 Super duplex sheets UNS S32750 S32760 1.4410 1.4501 Stainless steel sheets UB6 904L 1.4539 Alloy tubes 600; 601; 800; 825 Hastelloy C276 - Tubes and sheets 2.4816; 2.4851; 2.4856; 2.4360 Duplex super duplex stainless steel flanges 904L UB6 1.4539

Self-locking trapezoidal thread, spindle has end lock. Note: The through hole allows easy clamping and positioning of the workpiece. Drawing reference: 1) centring hole for 02210

The force to be measured must be introduced axially and perpendicularly to the entire surface of the inner and outer bands of the sensor in the opposite direction. Conversion of the acting force into an electrical output signal is performed by strain gages connected together in a full bridge circuit. To achieve optimal accuracy, the base of the sensor should rest on a smooth level surface, hardened to at least ≥ 58 HRC with sufficient dimensions. The base cover welded to the surface has a stabilizing effect on the sensor element. Lateral forces must be avoided anyway as they distort the measured results. Tension and bending relief for the sensor cable is to be carried out on the machine side. FEATURES: — Measuring ranges from 0 ... 100 N to 0 ... 200 kN — Centric throughout hole — Flat disc design — Made of stainless steel — Completely welded sensor body — Nominal characteristic value standardization possible — burster TEDS optionally available

stainless steel*flat form

ACCUMULATION ROTATING TABLE IN STAINLESS STEEL AISI 304 The rotary table of accumulation is generally used in the final part of the packaging lines and facilitates the discharge of the packs, facilitating the sampling operations by the operator. The stainless tables are available with rotating table diameter from mm. 800 to 1400 mm and exist in concave or convex version (ideal for bags and products that are accumulated) and flat (ideal for bottles, cans and products that can spill). The tables are supplied with adjustable feet up to 40 mm. On request it is possible to have wheels with brakes. Edges and sides stainless steel version The flat stainless steel version is equipped with containment rod while the concave tables do not have containment systems as the products accumulate in the center. The models in flat version can be equipped with double-rod containment, closed side with height 50 cm, exit slide, load system for incoming products

Ming Xiao Mfg has a friend factory working on wire forming production of all kinds of spring manufacturers, pressure spring, tension spring, torsion spring, clamp spring, shrapnel, special-shaped spring, stainless steel spring, metal spring, tower spring.... There are square steel, flat steel, various stainless steel and tin bronze spring and so on. The wire formed parts as belows: Large spring bending Shaped spring Compression spring Linear spring Hardware hook Torsion spring series Tensile spring Buckle retaining ring Clockwork coil roll Custom Springs Production equipment: computer spring forming machine, automatic spring coiling machine of various specifications, advanced double end spring grinding machine and torsion spring machine of various specifications, etc.

-Material :Stainless steel -Neck length:20mm -Style:England -Handcraft:Welding -Finish:Polishing -can be customized -Lead time:20-35days

COFFEE SPRINTER – The single cup coffee brewer, pour over for fresh coffee. The single-cup coffee brewer is the perfect solution for ultimate freshness. Place the COFFEE SPRINTER on your mug and introduce 2 tablespoons of ground coffee into the filter. The water distributor is inserted to press the ground coffee flat to the stainless-steel mesh at the bottom. Add some hot, not boiling water (appr. 50 ml ) and wait for 20 seconds to allow the ground coffe to swell up. Fill with hot water and pülace the lid on top (caution: observe cup/mug capacity). Hot water passes the ground coffee and fills the mug below. As soon as the water goes through the filter, remove the lid, turn it upside down, then place the filter on the lid which is now serving as a drip-off tray. Enjoy great coffee! Highlights fits most cups and mugs, from 7,1cm to 8,6cm micro-fine stainless-steel mesh water distributor for consistent extraction of the ground coffee lid serves as drip-off...

This extremely flat stainless steel anchor does not get in the way when stacking containers. Combine 2 ABS-Lock X-Flat devices to create a temporary lifeline system. The anchor is riveted onto the subsurface from above using 14 watertight blind rivets. The integrated sealant tape prevents water from seeping in. EN 795:2012, A + CEN/TS 16415:2017 Specially designed for sandwich and trapezoidal sheeting (positive/negative) For steel plating ≥ 0.5 mm Distance between the rows of pre-drilled holes: 180-250mm / 280-333 mm Installation materials included

The FLEXON maxxTop product range offers both stainless steel and plastic flat top chains. The range also includes conveyor chains made of cast iron and plastic, as well as straight running and sideflexing plate top conveyor chains. FLEXON stainless steel and plastic flat top chains are available as straight running or sideflexing versions, in a variety of materials, widths and plate thicknesses. Featuring low friction values, high resistance to wear, good noise damping, high-quality workmanship and surface finishes, they are widely used in the beverage industry and beyond. iwis Stainless steel flat top chains made of hardened material, which offers excellent tensile strength, corrosion and abrasion resistance. Highlights: - Increased wear resistance - Corrosion-proof - Better wear and corrosion properties when compared to carbon steel equivalent - Available in most standard sizes

The innovative SANHA installation system NiroTherm® combines high-quality NiroTherm® press fittings with a black sealing ring made from EPDM (=ethylene propylene diem rubber) and NiroTherm® stainless steel system tubes. The system is produced from the material 1.4301 (AISI 304). Due to the well-known corrosion resistance of stainless steel, NiroTherm® offers installers therefore a real alternative compared to conventional steels when it comes to closed systems in humid atmospheres such as screed. Since it needs considerably less isolation against humidity*, the installation is faster and labour costs accordingly lower. In addition to the system description, NiroTherm® system press fittings are marked on the outside with a red dot. * This does not affect thermal insulation necessitated by national energy efficiency laws. NiroTherm® system pipe, material no. 1.4301, reduced wall thickness, in 6 m lengths, for cooling, compressed air, heating and industrial applications

The innovative SANHA installation system NiroTherm® combines high-quality NiroTherm® press fittings with a black sealing ring made from EPDM (=ethylene propylene diem rubber) and NiroTherm® stainless steel system tubes. The system is produced from the material 1.4301 (AISI 304). Due to the well-known corrosion resistance of stainless steel, NiroTherm® offers installers therefore a real alternative compared to conventional steels when it comes to closed systems in humid atmospheres such as screed. Since it needs considerably less isolation against humidity*, the installation is faster and labour costs accordingly lower. In addition to the system description, NiroTherm® system press fittings are marked on the outside with a red dot. * This does not affect thermal insulation necessitated by national energy efficiency laws. NiroTherm® system pipe, material no. 1.4301, reduced wall thickness, in 6 m lengths, for cooling, compressed air, heating and industrial applications

The innovative SANHA installation system NiroTherm® combines high-quality NiroTherm® press fittings with a black sealing ring made from EPDM (=ethylene propylene diem rubber) and NiroTherm® stainless steel system tubes. The system is produced from the material 1.4301 (AISI 304). Due to the well-known corrosion resistance of stainless steel, NiroTherm® offers installers therefore a real alternative compared to conventional steels when it comes to closed systems in humid atmospheres such as screed. Since it needs considerably less isolation against humidity*, the installation is faster and labour costs accordingly lower. In addition to the system description, NiroTherm® system press fittings are marked on the outside with a red dot. * This does not affect thermal insulation necessitated by national energy efficiency laws. NiroTherm® system pipe, material no. 1.4301, reduced wall thickness, in 6 m lengths, for cooling, compressed air, heating and industrial applications

The innovative SANHA installation system NiroTherm® combines high-quality NiroTherm® press fittings with a black sealing ring made from EPDM (=ethylene propylene diem rubber) and NiroTherm® stainless steel system tubes. The system is produced from the material 1.4301 (AISI 304). Due to the well-known corrosion resistance of stainless steel, NiroTherm® offers installers therefore a real alternative compared to conventional steels when it comes to closed systems in humid atmospheres such as screed. Since it needs considerably less isolation against humidity*, the installation is faster and labour costs accordingly lower. In addition to the system description, NiroTherm® system press fittings are marked on the outside with a red dot. * This does not affect thermal insulation necessitated by national energy efficiency laws. NiroTherm® system pipe, material no. 1.4301, reduced wall thickness, in 6 m lengths, for cooling, compressed air, heating and industrial applications

The installation system consists of high-quality NiroSan® Gas press fittings with yellow moulded sealing rings made of HNBR (hydrogenated nitrile butadiene rubber) and NiroSan® stainless steel system pipes according to EN 10312, DVGW-Arbeitsblatt GW 541 and EN 10312. All NiroSan® Gas press fittings are made of the material 1.4404 / AISI 316L (for moulded fittings) and 1.4408 (for threaded fittings and stainless steel precision castings). The material contains at a minimum of 2.3 % molybdenum and a lower carbon content than the conventional steel quality 316. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® Gas press system is certified in accordance with and all important European certification bodies.

The installation system consists of high-quality NiroSan® Gas press fittings with yellow moulded sealing rings made of HNBR (hydrogenated nitrile butadiene rubber) and NiroSan® stainless steel system pipes according to EN 10312, DVGW-Arbeitsblatt GW 541 and EN 10312. All NiroSan® Gas press fittings are made of the material 1.4404 / AISI 316L (for moulded fittings) and 1.4408 (for threaded fittings and stainless steel precision castings). The material contains at a minimum of 2.3 % molybdenum and a lower carbon content than the conventional steel quality 316. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® Gas press system is certified in accordance with and all important European certification bodies.

The piping system consists of high-grade NiroSan® press fittings with an EPDM (=ethylene propylene dien rubber) moulded sealing ring and NiroSan® stainless steel system pipes according to EN 10312. All NiroSan® press fittings are made from the premium stainless steel type 1.4404 / AISI 316L (for pressing components) and 1.4408 (for precision cast threaded stainless steel components). The material 1.4404 contains at least 2.3 % molybdenum, yet less carbon than the conventional type 1.4401. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® press system and its components are certified in accordance with the rules and regulations of all important European certification bodies.

Attention:Delivery is made by forwarding . Freight costs as incurred. This flat rack out of stainless steel has adjustable feet and a damping. The wage and device plate (54,0 cm x 54,0 cm) will be inserted in the rack and put on your laboratory table. The effect is that your laboratory table will be upgradet to a wage table. Article number for wage and device plate : L58745001 Geben Sie Text oder eine Website-Adresse ein oder lassen Sie ein Dokument übersetzen. Abbrechen Verwendungsbeispiel für "": Automatisch von Google übersetzt

Stainless steel, flat, grades availabe on request, hot-rolled. Technical delivery conditions according to DIN EN 10088-3:2014. Execution as per DIN EN 10058. The produced bars are delivered with mill test certificates according to DIN EN 10204/3.1. Available in random lengths of 4000-6500 mm. *The regular minimum order quantity is 500 kg. The finished bars are packed in bundles of approx. 500 kg. Each bundle carries two labels, providing information about dimensions, grade, heat number, weight, manufacturer's code and works inspector. Other dimensions on request. Application areas: • Mechanical engineering • Power plants • Chemical industry • Petrochemical industry • Food industry / agricultural technology • Aerospace • Ship building • Medicine and pharmaceutical • Decorative purposes / kitchen equipment • Construction industry Special features: • Non-magnetic materials • Materials for low temperatures

Height 1300mm Width 520mm Wall to Face 85mm Tapping Centres 490mm Off Wall 70mm Output Polished 347 Watts / 1197 BTU @ delta 50 Output Polished 437 Watts / 1491 BTU @ delta 60 P Rating 15 @ D50 Electrified versions available with either standard element or a temperature controlled element. Dual Fuel Kits Standard code – EDF300 With integral temperature control code – EDF300TC Electric Models Standard Electric code – SS100E With Integral temperature control code – SS100ETC

The LogTag ST100T-15 external sensor is a strong and safe external sensor specifically designed for use with food. This external sensor is suitable for measuring the core temperature of a product. Place the sensor in the food and measure the temperature accurately.

Stainless steel is a very common material to use in fabrication projects, thanks to its versatility and durability, among others. Stainless steel possesses high good corrosion resistance which makes it the primary option for industries such as pharmaceuticals, food, petrochemicals and machinery.The versatility of stainless steel requires different fabricating techniques. Stainless steel is a sensitive material which requires delicate weld preparation practices such as thorough surface preparation prior to commencement of welding. Shoddy surface cleaning may compromise the material features such as corrosion resistance. Stainless steel has definite advantages over other metals and, it’s one of the most expensive metal. This high cost puts additional pressure on fabricators to be more careful in fabrication processes. Stainless steel should be fabricated in a specialized clean workshop to prevent contamination. Also it required specialist steel contractors

CNC Turning stainless steel part

Stainless Steel Investment Casting Graphite iron castings Gray iron casting Huan-Tai specialize in investment castings, sand castings, die castings, gravity castings in material of carbon steel, alloy steel, cast iron, ductile iron, aluminum, bronze and custom material. Typical products include custom casting parts, trailer parts, agricultural gearbox, gear, gear shaft, CNC machining parts, train parts, wear resistant parts, crusher parts like liner plates, bowl liner, jaw plate, mantle, heavy castings, coal mining machinery parts and aluminum castings & bronze castings etc. We strive to provide the high quality castings with tight tolerance and try to avoid defects delivered to our customers. Our inspection: 1.Metal testing and analysis, mechanical properties, microstructure, spectrometer and furnace chemical composition analysis. 2.Non-destruction inspection: MPE, LPE, UE and RE 3.Dimension inspection: well experienced inspector team 4.Quality control 5.

Etched stainless steel 304 plate

Etched stainless steel 304 gasket

CNC Turning stainless steel 304 gear part