Flange welding - Import export

We are able of producing a wide range of stainless steel flanges, including raised face socket weld, raised face threaded, raised face slip-on, stainless steel blind plate, stainless raised face blind, stainless lap joint, and stainless steel slide on plate. Stainless steel flanges with dimensions ranging from Ø 30 mm to Ø 740 mm are manufactured in accordance with your technical drawing requirements.

We are able of producing a wide range of stainless steel flanges, including raised face socket weld, raised face threaded, raised face slip-on, stainless steel blind plate, stainless raised face blind, stainless lap joint, and stainless steel slide on plate. Stainless steel flanges with dimensions ranging from Ø 30 mm to Ø 740 mm are manufactured in accordance with your technical drawing requirements.

Stainless steel flanges are a crucial component in various piping systems, providing ease of assembly and strength in connecting pipes, valves, pumps, and other equipment. They serve as a plate for covering or closing the end of a pipe and are commonly used in plumbing, oil and gas, petrochemical, and food industries due to their durability and corrosion resistance. Types and Specifications Stainless steel flanges come in several types to suit different applications: Weld Neck Flanges: Designed to be welded to the pipe. Suitable for high-pressure applications. Slip-On Flanges: Easily slide over the pipe and are welded in place. Socket Weld Flanges: Used for smaller, high-pressure piping. Threaded Flanges: Attached without welding, ideal for low-pressure applications or pipes with a thin wall. Blind Flanges: Used to seal the end of piping systems or pressure vessel openings. Lap Joint Flanges: Used with stub end fittings for applications requiring frequent dismantling.

EN 1092 plate flange for welding type 01, reduced thickness grade 1.4301 54 PN10 Form

EN 1092 plate flange for welding type 01, reduced thickness grade 1.4301 54 B11 PN16 Form A

EN 1092 plate flange for welding type 01, reduced thickness grade 1.4301 42 PN10 Form

EN 1092 plate flange for welding type 01, reduced thickness grade 1.4301 42 B11 PN40 Form A

DIN 2633 weld-neck flange, grade 1.4301 48.3 PN16 Form C

DIN 2633 weld-neck flange, grade 1.4301 42.4 PN16 Form C

DIN 2633 weld-neck flange, grade 1.4301 26.9 PN16 Form C

DIN 2633 weld-neck flange, grade 1.4301 21.3 PN16 Form C

DIN 2633 weld-neck flange, grade 1.4301 33.7 PN16 Form C

Wide range of products available at short notice Our delivery program in the product group flanges (ANSI B 16.5) includes the following types: Welding Neck Flanges. Slip-on flanges Loose Flanges (Lap Joint Flanges) Blind Flanges and Socked Welding Flanges Threaded Flanges Special / drawing parts. Special competence for special materials We supply flanges in the dimensions ½ "to 24" in the pressure levels 150/300/600/900/1500/2500 lbs. Our special competence lies in the delivery of special materials. The following special materials are available: Carbon Steel A 350 LF2 Chrome-Moly Alloy A 182 F Chrome-Moly Alloy A 182 F11 Chrome-Moly Alloy A 182 F 22

Combination of welding outlet and flange Nipoflange in pipeline construction A nipoflange is used in pipeline construction just like a welding outlet or a nipple outlet for a 90 ° branch. A Nipoflange is a combination of welding outlet, nipple outlet and flange. Further terms for Nipoflange are Weldoflange or Flangeolet. Two different branch sides On the pipe branch side , a nipo length has the shape of a welding outlet. This means that the branch from the pipe is made with a welded joint. There is a flange on the connection side, ie a flange connection is created. The flange can be designed according to customer requirements (usually according to DIN or ANSI). Nipoflange as a forged fitting A nipoflange (similar to ANSI B 16.9 / MSS-SP 97) is usually made from a forged blank. This means that a Nipoflange is a forged fitting and has no welds.

Welding Neck (WN) Flange Slip-On (SO) Flanges Socket Weld (SW) Flanges Lap Joint (LJ) or Van Stone Flanges Threaded or Screwed Flanges Blind Flanges Custom Flanges and fittings

The MBS hydraulic cylinders of the MZR-1019 series are lightweight cylinders where weight is of crucial importance. They were designed for the areas of mobile hydraulics, crane and aerial work platform construction. All cylinders work with low friction and are characterized by a stick-slip-free run. Lift and piston rod overhang are variable selectable. The cylinder connection is via plain bearing bushes. Connections are provided on the valve plate or a control block, which are flanged to the cylinder via welded pipes, in accordance with DIN EN 280. With the exception of the piston rod, all surfaces are protected against corrosion with a black primer. On request alternative surface treatments are possible. The surface of the piston rod is hard chromed, ground and polished. The cylinders are suitable for hydraulic fluids of types H, HL and HLP according to DIN 51524/51525. If you have questions about areas of application or other options, we are happy to answer them. Download the...

The consistent high quality of B57S makes it an excellent choice of anodising quality aluminum. It is designed for many different applications including electronic covers, in the transport and automotive industries, road and advertising signs and equipment housings. Your selection of material is of utmost importance. Finding a high quality product, with a good price/performance ratio, B57S will meet your needs. B57S can easily be cut, drilled, punched, edge-flanged and formed. Welding and brazing should be avoided in visible areas, because the localized heating of the metal will change its structure and affect the anodized finish.

Standards : EN 1092-1, DIN, ANSI B16.5 Dimension : DN15-DN600, 1/2"-24" Pression : PN2.5-PN160, 150Lbs-2500Lbs Material :Acier Carbonne, Allié, Inoxydable, Duplex & Super Duplex et autres…

Standards : EN 1092-1, DIN 2631-2638, ANSI B16.5 B16.47, BS 4504, JIS B2220 Dimension : DN15-DN2000, 1/2"-60" Pression : PN2.5-PN400, 150Lbs-2500Lbs Matière : Carbon Steel, Alloy, Stainless Steel, Duplex & Super Duplex and others…

Standards : EN 1092-1, ANSI B16.5, ASME B16.47 Dimension : DN15-DN2000, 1/2"-60" Pression : PN10-PN400, 150Lbs-2500Lbs Material :Carbon Steel, Alloy, Stainless Steel, Duplex & Super Duplex and others…

The Repico® SD – Slip type coupling two locks is designed to replace traditional pipe joining methods(welded, flanged, threaded etc.). Sealing against 10.7 bar (165psi) maximum and it has a progressive sealing. Max. angular deflection 5°. Completely made out of stainless steel 316. Green PTFE coated bolts. No special tools or skilled people are required to install the Repico® pipe couplings. Light weight appr. 30% in comparison with flanged connections. Quick to install (minutes). It requires limited space for installation, just a bit bigger than the pipe OD. Connects different materials. No transition couplings required, allows pipe section replacement. 60% noise reduction compared to rigid connections.

The Repico® Grip type coupling is designed to replace traditional pipe joining methods (welded, flanged, threaded, etc.). The Grip type pipe coupling offers a tensile or restraint connection between the pipes. This means that there is a leak free connection made and the pipes are held in position inside the coupling. A grip ring holds the pipe within the coupling. Of course any type of pipe material that can withstand the sealing pressure of the coupling can be connected. Note that there are different versions for metallic and plastic pipes. No special tools or skilled people are required to install the Repico® product program. The pipe ends only need to be deburred and cleaned. The bolts tightened evenly and torqued with a torque wrench ensures a secure and durable connection. The Repico® grip range has the following types: GLP, GMP, G, GF, please see their specifications in the separate sections.

The Repico® slip type coupling is designed to replace traditional pipe joining methods (welded, flanged, threaded, etc.) The Repico Slip type pipe coupling offers a non-tensile or non-restraint connection between the pipes. This means that there is a leak free connection made and the pipes are not held in position inside the coupling. Contraction and/or expansion of the pipe material can be handled within the coupling. Any type of pipe material that can withstand the sealing pressure of the coupling can be connected. Material that is not strong enough or has the tendency to shrink should be supported by a support bush (insert or stiffener). No special tools or skilled people are required to install the Repico® product program. The pipe ends only need to be deburred and cleaned. The bolts tightened evenly and torqued with a torque wrench ensures a secure and durable connection. The Repico® slip range has the following types: S, SL, SF, SD, SDL, SDF, ST and SQ, please see their...

The monoblock diaphragm and the ISA1932 monoblock nozzle are made from a solid round. The pressure taps are directly machined in the monoblock. They can be simply machined (pressure tapping holes) or supplied with nipples to connect directly to your installation. This type of diaphragm or nozzle has the advantage of being simple to install: simply mount it between single flanges or weld directly on the pipe for a version to be welded. All types of edges (sharp-edge, conical, quarter-circle, eccentric, segmental and multi-hole) can be made in a single-piece version. Flanged or corner pressure taps can be made in monoblock version.

The OPTISONIC 3400 is a 3-path ultrasonic inline flowmeter designed for a wide range of standard or more demanding process applications with homogeneous, non-viscous aqueous liquids as well as viscous fluids of up to over 1000 cSt. It is also the perfect choice for applications with cryogenic products (as low as -200°C / -328°F), media with extended temperature ranges (up to +250°C / +482°F) as well as low or extreme pressure ratings. Based on the transit time method, the 3 parallel acoustic paths of the flowmeter allow bi-directional measurement independent of flow profile for high accuracy even under less favourable flow profile conditions (e.g. short inlet and outlet runs). By means of the velocity of sound, the device is also able to identify process changes or liquid pollution. Its fully welded construction does not cause any pressure loss and is maintenance-free. The OPTISONIC 3400 is available with flange as well as welded connections.

Sensor with flange and extention tube The TRA/TCA-F13 is a flange temperature assembly. The main field of application is in tanks or pipelines and a weld neck flange is used to connect them; the particular advantage to this type of thermometer is that they can be coated (e.g. with PTFE), making them resistant to aggressive media. Form acc. DIN 43772: Form 2F Design: DIN-style, welded, multipart thermowells Process connection: flanges: DN25/PN40, DN50/PN40, ANSI 1/2", 1" and 1 1/2", 150 and 300 lb Neck tube connection: with fixed neck tube Tip design: straight tip Diameter: Ø 9, 10, 11 and 12 mm

WFIF welded stainless steel filter housings with flange connections are designed filtration of compressed air as well as many other gasses where the risk for corrosion is very high or where stainless steel housing is required. Required compressed air quality according to standard ISO 8571-1 can be achieved with 8 different grades of filter elements (PI, PIW, PN, PP, PR, PM, PS and PA). Fluid group 1 on request. Optional external condensate drains should be used for efficient condensate draining from filter housing.

Industrial water and chemical tanks serve a variety of purposes. They need to be strong and non-reactive with the chemicals they contain. Enduramaxx plastic rotationally moulded tanks are made from polyethene (PE) or Polypropylene (PP) according to which chemicals are to stored, and they are UV stabilised to withstand many years of outside use. These industrial chemical tanks are available with customised fittings and flanges. These include BSP inlets and outlets, PN16 and ANSI flanges, welded sockets, vents and fume proof lids for fuming chemicals. Liquid level sensor assemblies, fill pipes and suction pipes are available terminating in BSP and flanged connections.