Fixed beds - Import export

TECHNICAL DEFINITION Multi-propose filler for interior use. • Flling holes, cracks, chases • Fixing and bedding • Pasting polystyrene, roses, cornices • Finishing COMPOSITION AND APPEARANCE Powder filler composed of plaster, calcium carbonate, resin, cellulose fibre and various additives. Produces a white paste. ACCEPTED SUBSTRATES All types of interior substrates : plasterboards, plaster blocks, concrete blocks, aerated concrete, brick, earthenware, etc. VIDEO 1,5 - 5 - 15 -25 kg bags on wrapped pallet. 12 kg buckets on wrapped pallet. SUITABLE SURFACES Once completely dry, SEMIN FILLER AND SMOOTH FINISH can be covered with any type of paint, plaster-based filler, paste-like filler and wallpaper paste. For tiling, choose an adhesive suited to plaster substrates. DRYING TIME This depends on the weather conditions, on the type of substrate and on the applied thickness. As a general rule, for 1 cm thickness, SEMIN FILLER AND SMOOTH FINISH dries in 6 hours.

TECHNICAL DEFINITION Multi-purpose filler for interior use. • Filling holes, cracks, chases • Fixing and bedding • Pasting polystyrene, roses, cornices • Finishing COMPOSITION AND APPEARANCE Powder filler composed of plaster, calcium carbonate, resin, cellulose fibre and various additives. Produces a white paste. ACCEPTED SUBSTRATES All types of interior substrates: plaster, plasterboards, plaster blocks, concrete, cement rendering,concrete blocks, aerated concrete, brick, earthenware, TECHNICAL CHARACTERISTICS • Grain size : fine • Adhesion : complies with standard NFT 30 608 • pH : neutral • Setting starts after 50 minutes • Setting ends in 1 hr 10 min • Bending : 3 N/mm2 • Compression : 7 N/mm 12 kg buckets on wrapped pallet. STORAGE 9 months in original unopened packing protected from damp. THE TEMPERATURE DURING APPLICATION AND DRYING MUST BE SUPERIOR TO 5°C. DO NOT USE ON A DAMP SUBSTRATE. DO NOT USE ONCE THE PASTE HAS STARTED TO SET.

Product 13: The VOXsorbTherm (fixed bed adsorber) system has been developed especially for lean VOC concentration (<200 mgVOC/Nm³) and periodically occurring waste gas streams. The system is regenerated in place by an accompanying oxidation system.

Proven, patented method of fluid reclamation, extend the life of soluble oils, coolants, and washwater. The PRAB Oil/Water Separator uses a proven and patented method for gravity separation of oil from water to less than 15 ppm. This fluid reclamation separator is designed to meet and exceed all performance requirements of U.S. Coast Guard 46CFR162.050 and IMO Resolution A393 (X) of effluent discharge of 15 ppm free and mechanically dispersed oil in water. PRAB Oil/Water Separator filtration technology uses a double packed, fixed, porous media bed for accelerated fluid reclamation allowing the unit to be compact and lightweight. The system consists of the oil/water separator, supply pump with motor and a floating oil skimmer. Optional items include electrical controls, level switches, lid with vent, clean water discharge pump oil holding tank, oil discharge pump, and other customer specified controls and alarms.

Dorado: solid beech resin-coated multi- layer frame with support in SEBS on top of the frame and slats in beech wood always guarantee correct support for the mattress. Slats 25x8 mm in the shoulder area for a more flexible support. Firmness adjustment: In the lumbar region the bed frame is made with a special system of double slats and slider that work to regulate the hardness. Angular plate in nylon-fiber glass: the feet are fixed to the bed frame using a special angular plate in nylon fiber glass that works also as stabilizer support. All Dreamly products can be entirely customized by the customer: measurements, features, materials and finishes.

Sagitta: elegance and technology. The solid frame in multi-layer beech is covered by melamine paper with finiture Wengè. Special structure with no screw at the sight. Special slats support in TPEE and SEBS to create a dynamic support. The slats are covered by melamine paper and their particular texture results in less contact between the mattresses and the slats, increasing ventilation. Firmness adjustment: In the lumbar region the bed frame is made with a special system of double slats and slider that work to regulate the hardness. Elongated slats support: The tilting flexor joints, helps all the slats to ensure a ideal springing, interacting actively to solicitations of the mattress. Custom end slat: The slats at the of the bed frame are specially shaped for a better acceptance of the mattress. Crosspieces for feet: the feet are fixed to the bed frame using a special crosspieces that works also as stabilizer support. Slats 25x8 mm in the shoulder area for a more flexible support.

Leo represents absolute excellence in the bed sector, because it unites all the new trends into a single product. All the materials used for construction are of the highest quality and durable over time: starting from the sturdy frame in resin-coated multi-layer beech wood, to the slat supports in TPEE, a latest generation material also used in the automotive and aerospace sectors. The shoulder area is equipped with TSS, an independent and adjustable suspensions system that allow you to customize the rigidity and to follow the need of the body. Elongated slats support: The tilting flexor joints, helps all the slats to ensure a ideal springing, interacting actively to solicitations of the mattress. Custom end slat: The slats at the of the bed frame are specially shaped for a better acceptance of the mattress. Crosspieces for feet: the feet are fixed to the bed frame using a special crosspieces that works also as stabilizer support.

Firmness adjustment: In the lumbar re‌gion the bed frame is made with a special system of triple slats and slider that work to regulate the hardness. There is also a frame reinforcement. Crosspieces for feet: the feet are fixed to the bed frame using a special crosspieces that works also as stabilizer support. Slats supported by a high density foam when the bed frame is in the sleeping position. Elongated slats support: The tilting flexor joints, helps all the slats to ensure a ideal sprin‌ging, interacting actively to solicitations of the mattress. 4 section movements for the bed frame. The head part is straight for a more strong system.

They are made of a hard, resistant plastic and are used on the corners of the bed frames, fixing them by screwing the screws through the holes of the corners, in the wooden struts. In the center of the corners, the legs of the bed frames can be mounted very easily, by screwing them. The leg, struts and screws are not included in the price.

SBS suspensions are made of thermoplastic rubber, characterized by increased elasticity, as you can see in the videos below. It helps to mitigate the impact by cushioning when the bed frame is subjected to weight. It is mounted on their struts by being fixed on the bolts (click here) by pressing. The ideal supports for slats with a width of 38 mm are available in several colors and sizes, their role being to ensure increased comfort. The narrowest ones of 3.5 cm are used on the central spar of the bed frame, being fixed on both sides of it, while the medium supports of 5 cm and the widest ones of 6.5 cm are mounted on the outer spars.

The airy and delicate Morphey bumpers loved by all are now in an improved form. At the request of customers, we added an additional layer between the knitted fabric and padding polyester. Now a cover is sewn into each pillow with a second layer, where the padding is located. Our bumpers will create comfort in the crib and will perfectly fit into the interior of the nursery, thanks to the stylish laconic design Made of cotton yarn, inside there is silicone polyester Each pillow has 2 cotton ties on each side, with which the bumpers can be easily fixed to any bed Consist of 4 pieces 2 pillows 60 * 30 cm, 2 pillows 120 * 30 cm Easy to clean they can be washed in a washing machine without fear that the filler will get lost The height of the sides 30 cm, length 360 cm

The airy and delicate Morphey bumpers loved by all are now in an improved form. At the request of customers, we added an additional layer between the knitted fabric and padding polyester. Now a cover is sewn into each pillow with a second layer, where the padding is located. Our bumpers will create comfort in the crib and will perfectly fit into the interior of the nursery, thanks to the stylish laconic design Made of cotton yarn, inside there is silicone polyester Each pillow has 2 cotton ties on each side, with which the bumpers can be easily fixed to any bed Consist of 4 pieces 2 pillows 60 * 30 cm, 2 pillows 120 * 30 cm Easy to clean they can be washed in a washing machine without fear that the filler will get lost The height of the sides 30 cm, length 360 cm

The airy and delicate Morphey bumpers loved by all are now in an improved form. At the request of customers, we added an additional layer between the knitted fabric and padding polyester. Now a cover is sewn into each pillow with a second layer, where the padding is located. Our bumpers will create comfort in the crib and will perfectly fit into the interior of the nursery, thanks to the stylish laconic design Made of cotton yarn, inside there is silicone polyester Each pillow has 2 cotton ties on each side, with which the bumpers can be easily fixed to any bed Consist of 4 pieces 2 pillows 60 * 30 cm, 2 pillows 120 * 30 cm Easy to clean they can be washed in a washing machine without fear that the filler will get lost The height of the sides 30 cm, length 360 cm

for sensitive cells, for catalyzed reaction and for immobilized bioprocess. completely automatically working controlled by WinEr

cost-efficient scale down model, Saving time. completely automatically working controlled by WinEr

When your intruders arrive, you don’t have to think about sleeping areas. You can optionally separate the L-FOLD from the joints and turn it into 2 different sofas. Designed for small spaces, L-FOLD can be turned into an L armchair during the day and a warm bed by lifting it from its back at night. The arms of the corner set are fixed. It comes to bed position with the mechanism inside. If it is desired to be used in the bed position, it will be sufficient to slightly lift and open the profile of the metal designed for the product to be a bed. There is absolutely no creaking, flexing or loss of balance in the metal skeleton. Sugar crumbs and collapse-resistant felt are used in the seating part. Depth: 140 cm Width: 200 cm Height: 75 cm Seating Depth: 50 cm Seating Height: 45 cm. All of our products are set up in our assembly unit before they are packaged, and if there is no problem, they are sent to the packaging unit. In packaging, we cover all metal parts with polyethylene foam.

The Trindy triple sofa bed has a durable metal profile made of high quality premium fabric and a design that easily converts into a bed. The seating area is 67 cm by 185 cm when closed (triple sofa). The bed size is 120cm x 185 cm. The product is disassembled. The arms of the triple sofa are fixed. It comes to bed position with the mechanism inside. The seating part is made of quality sponge and collapse-resistant felt. If you want to use it in bed position, it will be enough to slightly lift and open the profile of the metal designed for the product to be a bed.

The adsorption system (AD) from Venjakob Umwelttechnik serves to concentrate exhaust air flows containing low concentrations of pollutants, and is particularly suitable for removing extremely low to medium concentrations of solvent-based pollutants (VOCs). This machine is characterized by: During the adsorption process, the pollutants are physically retained on the surface of a solid material (e.g. activated carbon, zeolite). The pollutants are then removed /desorbed from the zeolite by means of a small, hot stream of air. Afterwards, the flow of exhaust air from the desorption process is cleaned by means of an exhaust air cleaning system (TI, RTO, CTO). By reducing the volume and by increasing the concentration, the operating costs of the downstream exhaust gas purification system can be kept very low and make autothermal operation possible among other things The rotor is mounted vertically on a shaft with bearing and rotated slowly in the air flow. During rotation, the adsorption and desorption take place simultaneously in separate chambers with cooling on a hydrophobic (water-repellent) incombustible zeolite material. For tough applications, versions can be provided with a removable wear layer and / or higher temperatures of up to 300 ° C for desorption. Two containers are operated alternately. While one of the containers is adsorbing, the other container can be desorbed The adsorption process can be used for smoothing pollutant concentration peaks. If pollutant peaks occur during a process that could lead to a potentially explosive mixture (> 25% lower explosion limit), they cannot be introduced into an incinerator. However, the pollutants may be temporarily stored in an adsorber and then be released during the desorption phase. In certain situations, the installation of an additional fixed bed adsorber (molecular sieve) may further enhance the process (safety, operating costs).

The modern design and pressure distribution in five zones adjust the anatomical support and improve the orthopedic effect. Made of 100% beech, respectful with the environment, antiallergic and antistatic. The sheets are covered with aluminum foil by German technology, which allows a hygroscopic effect and prevents the appearance of dust mites. Designed for highly efficient support and ventilation of all types of viscoelastic, latex and foaming mattresses. The effect of the mattress doubles and provides 30% mattress area ventilation , eliminates accumulated moisture, prevents the appearance of unpleasant odor and mildew, prolongs the life of the mattress. The total height of the base is 33 cm. The sizes can be standard and on request. For hotels we offer wholesale prices.