Results for
BILOTSERKIVLYT LLC TM "BRIZOLL"
Ukraine
All Standard Shipping orders are handled by GLS except Germany which is handled by DHL. 2–5 business days All Express Shipping will be handled by DHL. Anywhere in EU: 1–2 business days
Request for a quoteSOPEM
Belgium
Year - 1965 Cross-bottom bag machine - Bag width : 10 to 32 cm Cut length : 15 to 47 cm - Bottom width : 5 - 12 cm Without printer
Request for a quoteSOPEM
Belgium
Year - 1970 Bag width : 12 - 26 cm - bag length : 20 - 39 cm - bottom width: 4 - 12 cm - 4 colour printer
Request for a quoteILUDEST DESTILLATIONSANLAGEN GMBH
Germany
For liquidliquidextraction according to the MixerSettlerprinciple, design acc. to Dr. E. Müller (Lurgi). With screw stirrer for intensive mixing of the phases, especially suited for metallic salt extraction. Pumping capacity and residence times are changed by adjusting the stirrer speed. An additional advantage of the unit is the application for extractions during which reactions of considerable density changes occur. Typical applications for this universal apparatus are metal salt extractions mixtures with low surface tension if the dispersed phase coalesces with difficulty if variation in residence time of the phases occur in the extraction stages if reactions are expected during the extraction process if considerable changes in density are expected as a result of extraction
Request for a quoteILUDEST DESTILLATIONSANLAGEN GMBH
Germany
Especially the theoretically additional evaluation of the temperature and pressure dependence of phase equilibrium is insufficient very often in daily practice, thus the experimental determination of VLEdata is increasingly requested in the overpressure range, too. ILUDEST®/ iFischer® modified the VLEequipment, since decades sold under the worldknown FISCHER® brand, suitable for the overpressure range up to 50 bar. The VLEequipment is designed for a charge of 50 ml (dynamic mode) and can be operated under vacuum (1...1,013 mbar), atmcondition and overpressure (1...50 bar) as well as temperature up to 250°C. An extended operating range up to 100 bar is possible.
Request for a quoteILUDEST DESTILLATIONSANLAGEN GMBH
Germany
Scientists and chemical engineers still measure phase equilibria despite the significant improvement in theoretical evaluations. Therefore, our phase equilibrium apparatus is part of the standard equipment in chemical engineering laboratories. The vapourliquid equilibrium of binary and multicomponent mixtures constitute an essential basis for the determination of the theoretical plates necessary for the evaluation of separation processes. Although VLEdata are known from literature, there is still an increasing tendency towards redetermining equilibrium data by experiments, because the thermodynamic parameters like pressure, temperature and concentrations are different or inadequate. For designing e.g. extractive distillation processes the evaluation of vapourliquidliquid phase equilibria (VLLEdata) are required. The practical measurement and determination of these data proves difficult with the standardised VLEunits because of the phase formation of the liquids.
Request for a quoteILUDEST DESTILLATIONSANLAGEN GMBH
Germany
Automatic SemiMicroDistillationUnit with the FISCHER® SPALTROHR® Column Compact and especially versatile, the fully automated FISCHER® LABODEST® HMS 500 AC is a unit with highest separation efficiency A modular system, which can be designed according to specific requirements including an equipment for recording the distillation curve or for printingout the distillation record by means of a printer or for connection for electronic data processing. Technical Data Charge Quantity 10...500 ml Operation Temperature up to 200°C, with optional extension up to 350°C Operation Pressure Atmospheric or Vacuum 10 0...0.1 mbar Pressure Drop < 0.1 mbar Separation Efficiency up to 90 theoretical plates Mains Supply 230 V, 50 Hz Dimensions (w x d x h) 1.25 x 0.60 x 1.70 m Weight approx. 100 kg
Request for a quoteILUDEST DESTILLATIONSANLAGEN GMBH
Germany
The iFischer® DIST D5236 CC / FISCHER® AUTODEST® 860 AC is a fully computer controlled unit of turn key design, and ready for use after installation and commissioning. The system is fully housed and equipped with doors in the front and rear to satisfy safety requirements and to facilitate service aspects. The automatic fraction collector with 12 receivers includes a builtin internal balance, which is used for the simultaneous determination of the fraction weight and for the direct distillation rate control. The vacuum equipment and the control system are designed for highest accuracy, repeatability and reproducibility of data. Also available are the iFischer® DIST D5236 CC 50 ltr, 100 ltr, 150 ltr and 250 ltr fully automated computerised distillation systems acc. to ASTM D5236 equipped with a set of comprehensive safety features in correlation with the applicable EU Machine Directives and refinery standards. Numerous optional items available.
Request for a quoteILUDEST DESTILLATIONSANLAGEN GMBH
Germany
The iFischer® DIST D2892 MC/ FISCHER® AUTODEST® 800 MC is an automated, computer controlled and PC operated unit of turnkey design, ready for use after installation and commissioning. The system is fully housed and equipped with doors in the front and rear to satisfy safety requirements and to facilitate service aspects. A respective design as per ASTM D5236 (Postill) is also available.
Request for a quoteILUDEST DESTILLATIONSANLAGEN GMBH
Germany
The system is a fully computer controlled unit of turn key design, and ready for use after installation and commissioning. It is fully housed and equipped with doors in the front and rear to satisfy safety requirements and to facilitate service aspects. The automatic fraction collector with 20 receivers includes a builtin internal balance for the determination of the fraction weight, while the separate volume follower system is used for discharging the fractions into the final receivers and the determination of the fraction volume as well as for the direct distillation rate control. The vacuum equipment and the control system are designed for highest accuracy, repeatability and reproducibility of data. Numerous optional items available.
Request for a quoteILUDEST DESTILLATIONSANLAGEN GMBH
Germany
The iFischer® DIST D1160 CC / FISCHER® AUTODEST® 850 AC is a fully computer controlled unit of turn key design, and ready for use after installation and commissioning. The unit extends the current test method and does not limit your vacuum distillation testing options. You are able to define your own tailored program also beyond the current standard. The system is fully housed and equipped with doors in the front and rear to satisfy safety requirements and to facilitate service aspects. The design also grants an easy maintenance by the operator. The analysis protocol is printed out simultaneously to the distillation and the distillation curves in actual boiling temperatures (ACT) and atmospheric equivalent temperatures (AET) as well as essential distillation parameters are shown on the monitor. The final data and the distillation curves are printed and stored on harddisk.
Request for a quoteILUDEST DESTILLATIONSANLAGEN GMBH
Germany
The iFischer® DIST D5236 CC / FISCHER® AUTODEST® 860 AC can be converted to the “HV” version by adding an extended Potstillcolumn to the standard ASTMsystem (Potstill). The respective distillation process is performed in the range of 0.005...0.1 mm Hg. The iFischer® DIST D5236 HV 6 ltr / FISCHER® AUTODEST® 860 HV 6 ltr is a fully computer controlled unit of turnkey design, and ready for use after installation and commissioning. The system is fully housed and equipped with doors in the front and rear to satisfy safety requirements and to facilitate service aspects. The automatic fraction collector with 12 receivers includes a builtin internal balance, which is used for the simultaneous determination of the fraction weight and for the direct distillation rate control. The vacuum equipment and the control system are designed for highest accuracy, repeatability and reproducibility of data. The system is also available with a capacity of up to 50 ltr.
Request for a quoteILUDEST DESTILLATIONSANLAGEN GMBH
Germany
Fully Automated/Computerized Distillation System for fractionating of crude oil samples, atmospheric residues resp. vacuum distillations of lubricating oil samples up to very low operation pressure (high vacuum HV Operation pressures down to 0.005 mmHg, allowing fraction temperatures up to 600 °C AET). The unit is equipped with an automatic fraction collector (FC) and combined automatic fraction discharge into final receivers, which are closed automatically. The fraction volumes and weights are determined by builtin volume follower system and internal balance (included software "FCExtension" allows to operate very narrow fractions by using max. 40 receivers).
Request for a quoteILUDEST DESTILLATIONSANLAGEN GMBH
Germany
The iFischer® DIST D2892/5236 CC or FISCHER® AUTODEST® 800/860 AC is a fully computer controlled unit of turnkey design, and ready for use after installation and commissioning. Fully housed and equipped with doors in the front and rear to satisfy safety requirements and to facilitate service aspects. The automatic fraction collector (in the system section TBP with 20 receivers) includes a builtin internal balance for the determination of the fraction weight, while the separate volume follower system is used for discharging the fractions into the final receivers and the determination of the fraction volume as well as for the direct distillation rate control. The automatic fraction collector (in the system section Potstill with 12 receivers) includes a builtin internal balance, which is used for the simultaneous determination of the fraction weight and for the direct distillation rate control.
Request for a quoteFISCHER FORTUNA GMBH
Germany
with HSK-C63 tool interface. Universally compatible, multi-sector grinding spindle with maximum performance. Spindles are not sold on the Webshop, but spindle inquiries are accepted. Below on this page are listed the available accessories and peripherals for the MFM1709/15 in the web shop.
Request for a quoteFISCHER FORTUNA GMBH
Germany
with HJND16 tool interface. Universally compatible, multi-sector grinding spindle with maximum performance. Spindles are not sold on the Webshop, but spindle inquiries are accepted. Below on this page are listed the available accessories and peripherals for the MFM1418 in the web shop.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
FISCHER FORTUNA GMBH
Germany
with HJND50 tool interface. Universally compatible, multi-sector grinding spindle with maximum performance. Spindles are not sold on the Webshop, but spindle inquiries are accepted. Below on this page are listed the available accessories and peripherals for the MFM1290 in the web shop.
Request for a quoteFISCHER FORTUNA GMBH
Germany
with HJND28 tool interface. Universally compatible, multi-sector grinding spindle with maximum performance. Spindles are not sold on the Webshop, but spindle inquiries are accepted. Below on this page are listed the available accessories and peripherals for the MFM1224/60 in the web shop.
Request for a quoteFISCHER FORTUNA GMBH
Germany
with HSK-C40 tool interface. Universally compatible, multi-sector grinding spindle with maximum performance. Due to the compact and durable design, the MFM-1224 is suitable for use in industrial robots. Spindles are not sold on the Webshop, but spindle inquiries are accepted. Below on this page are listed the available accessories and peripherals for the MFM1224 in the web shop.
Request for a quoteFISCHER FORTUNA GMBH
Germany
with HJND21 tool interface. Universally compatible, multi-sector grinding spindle with maximum performance. Spindles are not sold on the Webshop, but spindle inquiries are accepted. Below on this page are listed the available accessories and peripherals for the MFM1224/42 in the web shop.
Request for a quoteFISCHER FORTUNA GMBH
Germany
with HJND60 tool interface. Universally compatible, multi-sector grinding spindle with maximum performance. Spindles are not sold on the Webshop, but spindle inquiries are accepted. Below on this page are listed the available accessories and peripherals for the MFM12120 in the web shop.
Request for a quoteFISCHER FORTUNA GMBH
Germany
with HJND50 tool interface. Universally compatible, multi-sector grinding spindle with maximum performance. Spindles are not sold on the Webshop, but spindle inquiries are accepted. Below on this page are listed the available accessories and peripherals for the MFM1090 in the web shop.
Request for a quoteFISCHER FORTUNA GMBH
Germany
with HJND21 tool interface. Universally compatible, multi-sector grinding spindle with maximum performance. Spindles are not sold on the Webshop, but spindle inquiries are accepted. Below on this page are listed the available accessories and peripherals for the MFM1022 in the web shop.
Request for a quoteFISCHER FORTUNA GMBH
Germany
with HJND60 tool interface. Universally compatible, multi-sector grinding spindle with maximum performance. Spindles are not sold on the Webshop, but spindle inquiries are accepted. Below on this page are listed the available accessories and peripherals for the MFM10120 in the web shop.
Request for a quoteFISCHER FORTUNA GMBH
Germany
FISCHER MFL-1075 precision grinding spindle By fine-tuning the performance and optimizing the design, we have succeeded in developing a high value product line that does not compromise in quality. Spindles are not sold on the Webshop, but spindle inquiries are accepted. Below on this page are listed the available accessories and peripherals for the MFL1075 in the web shop.
Request for a quoteFISCHER FORTUNA GMBH
Germany
FISCHER MFL-1045 precision grinding spindle By fine-tuning the performance and optimizing the design, we have succeeded in developing a high value product line that does not compromise in quality. Spindles are not sold on the Webshop, but spindle inquiries are accepted. Below on this page are listed the available accessories and peripherals for the MFL-1045 in the web shop.
Request for a quoteFISCHER FORTUNA GMBH
Germany
FISCHER MFL-1024 precision grinding spindle By fine-tuning the performance and optimizing the design, we have succeeded in developing a high value product line that does not compromise in quality. Spindles are not sold on the Webshop, but spindle inquiries are accepted. Below on this page are listed the available accessories and peripherals for the MFL-1024 in the web shop.
Request for a quoteFISCHER FORTUNA GMBH
Germany
FISCHER MFL-10105 precision grinding spindle By fine-tuning the performance and optimizing the design, we have succeeded in developing a high value product line that does not compromise in quality. Spindles are not sold on the Webshop, but spindle inquiries are accepted. Below on this page are listed the available accessories and peripherals for the MFL10105 in the web shop.
Request for a quoteResults for
Fischer fischer - Import exportNumber of results
67 ProductsCountries
Company type