Fire control - Import export

The AViTEQ Vobtronic units are fully equipped controllers for the operation of vibrators. About a variety of standard features and special designs the controllers can be used in many different industries and variable to adapt to the work environment. VIBTRONIC® -controllers are designed to supply AC voltage to control magnetic vibrators. They operate according to the principle of voltage control (phase-fired control). For all standard voltages in the 50 and 60 Hz main supply, AViTEQ has a suitable controller available in either a built-in or housing design. The controllers have voltage compensation for fluctuations in the main supply and some models have a limited control that rotects the magnetic vibrator from impact. The setpoint specification can be set using a potentiometer or an external setpoint (0-10 VDC or 0/4-20 mA). Information regarding operational status can be read from the integrated status relay and LEDs. Depending on the model, a vibrator current up to 100 A is possib

The door holding magnets are mainly used as holding devices on fire protection doors. They hold them in place when open. Controlled by a fire alarm or smoke protection control panel, they release the closures by interrupting the power supply in the event of a fire hazard. Product features: - Coil vacuum encapsulated (IP65) - VdS quality-controlled - Tested according to EN1155 & EN 14637 - Optimised design and quality - Accessories: Anchor plate

The door holding magnets are mainly used as holding devices on fire protection doors. They hold them in place when open. Controlled by a fire alarm or smoke protection control panel, they release the closures by interrupting the power supply in the event of a fire hazard. Product features: - Coil vacuum encapsulated (IP65) - VdS quality-controlled - Tested according to EN1155 & EN 14637 - Optimised design and quality - Accessories: Anchor plate

The door holding magnets are mainly used as holding devices on fire protection doors. They hold them in place when open. Controlled by a fire alarm or smoke protection control panel, they release the closures by interrupting the power supply in the event of a fire hazard. Product features: - Coil vacuum encapsulated (IP65) - VdS quality-controlled - Tested according to EN1155 & EN 14637 - Optimised design and quality - Accessories: Anchor plate

The door holding magnets are mainly used as holding devices on fire protection doors. They hold them in place when open. Controlled by a fire alarm or smoke protection control panel, they release the closures by interrupting the power supply in the event of a fire hazard. Product features: - Coil vacuum encapsulated (IP65) - VdS quality-controlled - Tested according to EN1155 & EN 14637 - Optimised design and quality - Accessories: Anchor plate

The door holding magnets are mainly used as holding devices on fire protection doors. They hold them in place when open. Controlled by a fire alarm or smoke protection control panel, they release the closures by interrupting the power supply in the event of a fire hazard. Product features: - Coil vacuum encapsulated (IP65) - VdS quality-controlled - Tested according to EN1155 & EN 14637 - Optimised design and quality - Accessories: Anchor plate

The door holding magnets are mainly used as holding devices on fire protection doors. They hold them in place when open. Controlled by a fire alarm or smoke protection control panel, they release the closures by interrupting the power supply in the event of a fire hazard. Product features: - Coil vacuum encapsulated (IP65) - VdS quality-controlled - Tested according to EN1155 & EN 14637 - Optimised design and quality - Accessories: Anchor plate

The door holding magnets are mainly used as holding devices on fire protection doors. They hold them in place when open. Controlled by a fire alarm or smoke protection control panel, they release the closures by interrupting the power supply in the event of a fire hazard. Product features: - Coil vacuum encapsulated (IP65) - VdS quality-controlled - Tested according to EN1155 & EN 14637 - Optimised design and quality - Accessories: Anchor plate

The door holding magnets are mainly used as holding devices on fire protection doors. They hold them in place when open. Controlled by a fire alarm or smoke protection control panel, they release the closures by interrupting the power supply in the event of a fire hazard. Product features: - Coil vacuum encapsulated (IP65) - VdS quality-controlled - Tested according to EN1155 & EN 14637 - Optimised design and quality - Accessories: Anchor plate

Light and sound sirens are used in fire alarm systems, in evacuation control systems, extinguishing systems etc. 13 variants of labels (or custom) and modifications for the power supply voltage of 12 or 24V.

Intrinsically safe light and sound sirens are used in fire alarm systems, in evacuation control systems, extinguishing systems etc. in explosive areas Power supply voltage - 12 V 5 variants of labels (or custom).

Addressable fire alarm control panel with 2 loopsIntended to protect premises of any size. This is a new look at fire safety: a modern software and hardware platform, high technologies, an affordable price and impressive capabilities that are not characteristic of any domestic analogue.

AM-OUT2R is an addressable module used to control fire automation equipment in the Tiras PRIME A system. Connects to the addressable interface and adds 2 relays 10A/230V, capable of switching the voltage of both direct and alternating current.

BTF designs and builds ovens for performance of fire resistance testing according several standards. We have experience in the construction of vertical, horizontal and combi ovens which are built for fire resistance trials –under controlled pressure and temperature. The furnaces are equipped with all the instruments needed for the monitoring, the acquisition and the processing of data. We continuously develop our own software using Siemens material for the automatic monitoring of the ovens during tests on the basis of a programmed curve and with data measured by the various sensors and probes (temperature, pressure, oxygen, radiation, deflection,…) The ovens can be flexible and equipped with a loadbearing system, an outdoor chimney with an extraction or treatment of flue gas, walkways, camera, deflection measurement system, etc. We also manufacture frames, removable walls and caps to modulate space in ovens according to tested samples. We move, adapt and renovate existing installation.

We , Boran Reklam Ltd., provide safety warning signs solutions all over the world. Quality is the important part for us. We use 4 mm. composite panels for our signs. Special protection system has been developed to increase life time of UV printing. Also we have different solution such as 1 mm. aluminium for warning signs. Aluminium has been fired up to 200 celcius degree for resistance. Our printing is water-based and there is no any health issue while printing, finished product. Our printing has waterproof for hard weather conditions. Category of the sign: 1.Site Safety Signs prohibition signs , warning signs, mandatory action signs, prompt signs 2.OSHA Signs Danger signs, Warning signs, Caution signs, Notice Signs 3.IMO Signs Safety signs, Direction signs, IMO Fire control signs, Prohibition signs, Mandatory signs, Fire signs, Warning signs, Hazardous goods signs, IMO signs with text, ISPS signs

Our standard Downdraft Spray Booth draws non-pressurized fresh filtered air, from a ceiling-mounted supply plenum, which then flows uniformly over the entire work area and out through a filtered, grated in-floor or grids basement exhaust plenum – creating an optimal spray coverage environment. Spray Booth Specifications: The main room & generator system: Wall panel: sandwich style, δ=50mm，rock wool available as required. Basement: steel structure, full grids，ramp: 2 pcs of grids. Door: 3 pcs of front door without aluminum side cover. 1pcs of emergency door with pressure lock. One 11kw intake fan and one 11kw exhaust fan. DUCTS: Electrical VCD. one pressure meter. Spraying/baking transition damper, automatically air controlled. Fire protection equipment: 1set, the inductor control closed; energysaving equipment: 1set. 4m straight exhaust ducts, one 90° bend, and one 60° bend.Intake duct :4m straight exhaust ducts, one 90° bend, and one 60°bend. 4m straight chimney and 2 small bends.

Combined disabled refuge EVC, disabled toilet alarm, fire telephone and building alarms system, controlled and monitored from a single fire panel sized enclosure. All control boards, PSUs, batteries, etc. mounted inside the monitoring station. Simply connect mains and outstations for a complete system. Saving money, installation cost, space etc. Remote monitoring and third-party interfaces over serial / IP / fibre available

Developed to be used in rescue, emergency’s, fire, vehicle´s release, operational controls, among others. Developed in mesh fabric with a high visibility reflective band throughout its periphery. It has two external front pockets for diagnostic and intervention material, two large capacity internal flat pockets, an internal rear compartment for a hydration bag. All around MOLLE system for the attachment of additional medical and/or tactical material. For Day and Night Operations.

Automatic detection and activation management provides 24 hours protection. In addition of fire detection, you can activate the system manually thanks to a special system of manual activation. The most effective agent in fire extinguishing industry. Thanks to high pH formula it extinguishes fire and prevents reignition. Steel cylinders under pressure are always ready to discharge the fire extinguishing agent in case of fire. Pressure transducer on the cylinder of fire extinguishing agent provides visual control. 100 % installed and tested control block ensures safe operation of the input and output functions. Installation will be made without disturbing the workflow of your kitchen due to the flexible pipe configuration. Protective chrome cover protects nozzle from clogging by dirt and grease, providing discharge of gas without interruption. Nozzles’ cover are removing and don’t interrupt the discharge of fire extinguisher.

Patol can design and manufacture control modules and fire & safety control equipment panels and cubicles to meet the requirements of national standards, client specifications or project needs.

LIYY LIYCY LIHCH LIH(St)CH YSLY-JZ YSLYCY-JZ NYSLYO-JZ J-Y(St)Y...Lg J-H(St)H...Lg PDV HBH

Marine Sign has a complete production unit dedicated to the production of IMO Signs and Posters. With over 40 years of experience in the field of Printing, Screen and Digital Printing, our unique goal is to offer our customers Superior Quality products that last withstand time and have a high tolerance of exterior conditions such as sun exposure, humidity, scratch and wear.