Filter units - Import export

Valve + filter regulator + lubricator maintenance unit of the Comfort series Sizes: 1/4" to 1" Adjustment range: 0-2 bar, 0-4 bar, 0-8 bar standard, 0-12 bar Filter fineness: 5 – 20 – 50 µm Flow rate at 6 bar with ∆p 1 bar: 800 to 3500 Nl / min Pressure range up to 15 bar

"FFU (Fan Filter Units) that require precise cleanliness of environmental air (as per ISO 14644 standard flow environments) also need to operate in a laminar air flow in these situations. Mikropor produces Fan Filter Units with two stage filtration. Fan Filter Units ( FFU) are based on a push and pull working principle, with environmental air drawn through a G4 class coarse filter to capture relatively large particles. Thanks to Mikropor’s highly efficient HEPA class filters on the second stage, outlet air on the production lines will have the highest level of air purity. Mikropor produces standard or custom sized Fan Filter Units, designed and manufactured to meet the cleanroom application requirements."

Trolley with vane pump Cartridge filter: 10 microns Suction and discharge kit: Oil: 10 to 500 cSt (mm2/s) Built-in and adjustable bypass Maximum suction lift: 5 metres Maximum temperature of the pumped liquid: 60°C Single-phase or three-phase motor Voltage: single-phase 230 (FiLTRO20, FiLTRO22) and three-phase 400 (FiLTRO21, FiLTRO23) Current: 4.6 (FiLTRO20), 2.2 (FiLTRO21), 7.8 (FiLTRO22), 5 (FiLTRO23)

Filter unit guaranteeing a double filtration For oil and diesel by absorbing the water and impurities present Filtration capacity of the first cartridge: 30 μ with water absorption Filtration capacity of the second cartridge: 5 μ for impurities Flexible suction hose: 3 metres with a built-in foot valve and a 3-metre discharge hose Structure: a trolley on wheels with a large diameter and retention tray

Our powder paint booths are manufactured as standard or custom design according to the customer’s needs. For the cabin selection, the dimensions of the parts and the targeted capacity are the determining elements. Our booths are made of stainless steel or galvanized sheet and fully assembled with bolts to easy disassembling. Recycling is done with the cyclones in our powder coating booths with cyclone. It is preferred because it allows easy and fast color change. The powder particles which are not used passes through the cyclone unit before the filter unit. While the particles go down through cyclones with centrifugal effect, the particle that cannot be reused is sent to the filter unit and filtered there. The parts which are suitable for recycling are recycled to the system for reuse. Multi and mono type cyclone units are used in our booths. Both types offer efficiency with recycling systems, practicality with easy color changing. In filter cabins, it is necessary to change

The cup falls Feeding station Aluminum placing (preset cap) Waterproofing Dating Carrier’s exit Automatic date placement The cup filling machine has three photocells A photocell to check the filling whether there is any cup or not. Thanks to this photocell system, the machine will not lose the product. If there are no cups, then the machine will not proceed with filling. The photocell control for the aluminum lids, whether there is cup or not, thanks to this system if there is no cup then the machine will not waste the aluminum lids. The photocell control for sealing, thanks to this system it checks whether there are aluminum lids on the cups or not, if there are no lids on the cups then the machine will not reach the sealing unit and the machine stops.. Additional options are possible in the yogurt filling sealing machine Flow filter unit-ΗΕΡΑ Second filling station for filling multiple products Adjustment of placement between cap and cap

Combined Filter Drier and Liquid Receiver is an unit which hold Filter Drier and Liquid Receiver within a single body and performs as both at the same time. Having of the innovative design, the unit saves a great space. The function of the liquid receiver is to send the refrigerant fluid in 100% liquid state to the expansion valve for the best cooling effect. These series are produced for vehicle type refrigeration and air conditioning systems. They have high performance against the variable revolution of engine. ESSCV, Vertical mounting, ESSC, Horizontal mounting, ESSC / ESSCOD / ESSCOR / ESSCV Series Combined Filter Drier And Liquid Receiver ESSC / ESSCOR / ESSCOD / ESSCV Combined Filter Drier and Liquid Receiver series are hermetic designed to be used in compacted bead style for use on liquid line. Moisture removal formula, is prepared as %100 Molecular Sieve targeting maximum moisture removal and acid formation prevention.

CF 30 G equipment is supplied completely assembled and ready for operation. The dust collection unit is suited for intermittent operation only, because regular cleaning of the pocket filter element in certain intervals is an absolutely must for the proper operation of the equipment. The cleaning intervals will depend on the operating conditions and must be established by experience. Normally cleaning intervals will be between operating times of 30 minutes to two hours. It is a prerequisite for sufficient and intensive cleaning of the filter cloth that dust collecting is interrupted during cleaning to achieve static pressures on the filter material. A retention time of 1 - 2,5 minutes between the end of the suction and the beginning of the cleaning process is therefore required. The filtered air must be removed outside - do not lead back to closed rooms!

The professional air purifier with 3 filter stages and UV-C light frees the air reliably from aerosols, bacteria, pollen and viruses. Particularly suitable for large rooms with a high footfall, such as doctors' surgeries, fitness studios, open-plan offices and kindergartens. The device consists of a powerful fan with a 3-stage filter unit. The air is sucked in and passed through a pre-filter past UV-C lamps and then passes through the built-in HEPA filter (HEPA - High Efficiency Particulate Air Filter Class H14). Noise level in dB: 25% - 43 dB 50% - 51 dB 75% - 59 dB 100% - 61 dBAttention: Only our original filters guarantee safe use!

A double head mitre saw with disappearing blades specifically studied for the tubular steel shapes. Automatic positioning of the movable unit. Electronic positioning of the cutting units on any angle within 45° and 135°. It is equipped with the system TS 690. Frontal and straight blade feed with speed adjustments. Hydro-pneumatic blade feed. Speed of rotation of the blades, variable by means of a frequency converter (inverter). Automatic shifting of the support plates of the profile once over the cutting cycle. Dynamic protection guards for a total covering of the cutting area. Blade lubrication cooling system with electric pump. Coolant liquid vat with extractable pump for vat cleaning. Cutting deepth stop device. Intermediate workpiece support automatically operating Mobile roller conveyor with pneumatic clamp for section support Compressed air treatment unit (filter/reducer/lubricator)

Valve+Filter+Regulator+Oiler Maintenance unit of the Comfort series Sizes: 1/4" to 1" Adjustment range: 0-2 bar, 0-4 bar, 0-8 bar standard, 0-12 bar Filter fineness: 5 – 20 – 50 µm Flow rate at 6 bar with ∆p 1 bar: 1000 to 3900 Nl / min Pressure range up to 15 bar

Filter+regulator+lubricator maintenance unit of the Comfort series Sizes: 1/4" to 1" Adjustment range: 0-2 bar, 0-4 bar, 0-8 bar standard, 0-12 bar Filter fineness: 5 – 20 – 50 µm Flow rate at 6 bar with ∆p 1 bar: 1650 to 4500 Nl / min Pressure range up to 15 bar

Filter+regulator+lubricator maintenance unit of the compact series Sizes: 1/8" and 1/4" Adjustment range: 0-2 bar, 0-4 bar, 0-8 bar standard, 0-12 bar Filter fineness: 5 – 20 – 50 µm Flow rate at 6 bar with ∆p 1bar: 280 Nl/min Pressure range up to 15 bar

Filter regulator + lubricator maintenance unit of the compact series Sizes: 1/8" and 1/4" Adjustment range: 0-2 bar, 0-4 bar, 0-8 bar standard, 0-12 bar Filter fineness: 5 – 20 – 50 µm Flow rate at 6 bar with ∆p 1 bar: 260 Nl/min Pressure range up to 15 bar

Active Filter Units Thyristor-high speed Reactive Power Compensation panels, Reactive Power Compensation Units with Contactors, Passive Harmonic Filters High power up to 1.000KVAR Special solutions for industrial applications, Cabinet up to IP65 for indoor and outdoor applications Project-based special design and production

For clayey materials, as an alternative or in addition to the disruptor, it is possible to consider a system of high pressure water jets called the jet-ring system. This system consists of a ring, applied in correspondence with the filter of the dredging unit and a centrifugal pump for feeding the ring with a horizontal axis (available in electric and hydraulic version).

The TSC Series is the Torque and Speed Conditioner used to connect Magtrol Eddy-Current (WB) or Powder (PB) Dynamometers to the DSP7000 Dynamometer Controller. Powered by the dynamometer controller, and based on a precision instrumentation amplifier, the unit amplifies and filters the torque signal. It also provides power and connections for the speed pickup sensor which is located in the dynamometer.

The household reverse osmosis filtration system gives a high purity of drinking water through a system of high capacity filtration that removes even the smallest microorganism or particles that may be present in the water. The filtration system consists of: Prefilter for sediment. Activated carbon filter. Reverse osmosis membrane. Postfilter activated carbon filter. A patented reverse osmosis unit that is unique on the market, whose design avoids the need for multiple connections and tubes, and possible water leaks. System with easy to replace filters. It incorporates a pump that ensures the required water input pressure necessary for proper operation and a pressured accumulator tank of 12 liters. It is installed under the sink in the kitchen and requires water inlet, drainage and electricity like a washing machine. A faucet for purified water has to be installed which can be the standard equipment or the special three way faucet head model with a more elegant design.

The environmental protection has become essential. The water quality is a rare and expensive commodity and its production involves a problem more and more present with the industrial or urban slurries which need to be eliminated at a lower cost and if possible to be recovered. The filter-press has an important place in numerous industries whenever slurries can be concentrated : it can be used either in process or at the end of treatment. In any case the filter-press enables an optimal separation of liquid and solid and the last technical developments which has made it 100 % automatic made it also 100 % topical. The filter-presse is a machine used to filter under pressure the liquids loaded with solid matter in suspension. The filter-press is composed of 3 main parts : the frame, the filter part and the hydraulic power unit..

The Exofalc Choquenet candle filter is used in many industries such as the food industry (sugar refinery, cocoa, etc.), chemicals, alumina, pharmaceuticals, etc. Indeed, its simplicity of use (100% automatic) combined with a technology allowing a high concentration of sludge makes it a formidable thickening filter adaptable to many fields. It offers high filtration rates/filtering surface ratios for a modest footprint. A permanent visual control of the quality of the filtrate allows to react instantly in case of a punctured or clogged cloth, each ramp being individual, it can be isolated in order to maintain a high production rate. It also has the advantage of being able to see its internal filtering surface evolve according to customer constraints without modifying its external environment. Finally, due to its design and degree of automation, it allows increased productivity with very low operating costs.

SF-IL Inline Screen Filters Heavy duty industrial inline screen filters for coarse applications. Standard units are supplied with inline connections for easy istallation. Industrial design Range of screen sizes Hinged closure Stainless Steel Construction PN16 flange 10 bar pressure rating PED compliant F-SF Inline Bulk Transfer Filter Designed for product transfers from holding tanks to tankers. Ideal for product transfers from tankers to tanks Industrial or hygienic design Camlock couplings for quick connections Clamp closure for easy maintenance Basket in range of mesh sizes PED 10 bar -10 / 80 °C

acuraLine 1FU Cartridge Filter Housings are industrial inline filtration units. These filter housings feature strong Stainless Steel construction, robust threaded closure, high operating pressures of up to 25 barg and option to mount a differential pressure gauge. All 1FU filter housings are supplied with a Viton seal as standard for chemical compatibility. Applications Oils Chemicals Water Paints CNC machine Coolant Acids Process water Solvents Batch filtration Laboratories Recirculating baths Parts washing Features Connections Inline connections for easy installation. Cartridge locking Suitable for DOE or SOE (Code 3 & Code 8) filter cartridges. Traceability Identification with serial number. Construction Strong industrial design with threaded closure for industrial & process applications. Design Code According to AD2000. pecifications Cartridge sizes 5”, 10”, 20”, 30” Connections 1” BSPF Inline Housing material 304 Stainless Steel (Optional 316SS)

STAUFF Systems Units are characterised by their extremely efficient filter elements which are rated to 0,5 micron. Specially designed for industrial hydraulic installations the STAUFF Offline Filters are available in single or double length configurations. The Offline Filter Units can easily be mounted to new and existing hydraulic installations. By means of an integrated motor/pump unit and an Offline Filter, the oil is pumped from the reservoir through the filter unit and after filtering the oil is then returned to the tank. Motor/Pump Units ▪ Different configurations available ▪ Air driven motors Clogging Indicators (available as an option) ▪ Visual clogging indicator Filter Elements ▪ Filter elements of SRM series Pre-Filter Elemets ▪ Spin-On filter elements of SF67 series Construction ▪ Offline filter with integrated motor/pump unit ▪ Offline filter units with up to four filter housings in single or double length configurations Nominal Flow Rate ▪ 2,1 ... 17 l/min / .55...

STAUFF Offline Filter Units can be applied to every imaginable industrial application where hydraulic or lubrication systems are present. An integrated motor/pump unit draws fluid out of the tank, filters it and pumps clean oil back into the system. Offline Filter Units can continue to work even when the main system is not in use. Motor/Pump Unit ▪ Available in different configurations ▪ Air driven motors Clogging Indicator (available as an option) ▪ Visual clogging indicator Micro Filtration Elements ▪ Micro filter elements of SRM series Construction ▪ Offline filter with integrated motor/pump unit ▪ Offline filter units with up to four filter housings in single or double length configurations Nominal Flow Rate ▪ 2,1 ... 17 l/min / .55 ... 4.5 US GPM Max. System Volume ▪ Up to 10.800 l / 2.853 gal Port Connection ▪ G3/8, G1/2, G3/4 and 18 L Materials ▪ Anodised Aluminium Media Compatibility ▪ Mineral and lubrication oils, other fluids on request

Specially designed for industrial hydraulic installations, the STAUFF Offline Filters are available in single or multiple housing configurations. The Offline Filter Units can easily be mounted to new and existing hydraulic installations. By means of an integrated motor/pump unit and an Offline Filter, the oil is pumped from the reservoir through the filter unit and after filtering the oil is then returned to the tank. Motor/Pump Unit ▪ Available in different configurations ▪ Air driven motor Clogging Indicator (available as an option) ▪ Visual clogging indicator ▪ With water sensor Filter Elements ▪ Filter elements of SRM series Construction ▪ Offline filters with integrated motor/pump unit ▪ Heated offline filter unit Nominal Flow Rate ▪ Max. 4,2 l/min / 1.2 US GPM Max. System Volume ▪ Up to 2.700 l / 713 gal Water holding capacity ▪ Up to 2.280 ml / 80 oz. Materials ▪ Anodizied Aluminium

Isolation Unit, 2-piece, for positive or negative room pressure This Isolation Unit is made for installation on walls or windows. Pressure differences up to 20 Pascal are easily generated. Negative pressure is obtained when the filter unit is placed inside the room, and the ventilator unit is placed outside the room. (infectious patients) Positive pressure is obtained when the ventilator unit is placed inside the room and the filter unit is placed outside the room. (immune-compromised patients). Both parts are connected by a tube – through the wall – which contains an air back-pressure flap (standard) and fire damper (optional). Filters used in this Isolation Unit are of HEPA14 or ULPA15 quality, leaktested and airtight secured. – Automatic differential pressure regulation – Automatic pressure loss alert – Filter detection by ID code (filter condition) – Complies with CDC guidelines (Centres for Disease Control and Prevention)