Filter change - Import export

Our powder paint booths are manufactured as standard or custom design according to the customer’s needs. For the cabin selection, the dimensions of the parts and the targeted capacity are the determining elements. Our booths are made of stainless steel or galvanized sheet and fully assembled with bolts to easy disassembling. Recycling is done with the cyclones in our powder coating booths with cyclone. It is preferred because it allows easy and fast color change. The powder particles which are not used passes through the cyclone unit before the filter unit. While the particles go down through cyclones with centrifugal effect, the particle that cannot be reused is sent to the filter unit and filtered there. The parts which are suitable for recycling are recycled to the system for reuse. Multi and mono type cyclone units are used in our booths. Both types offer efficiency with recycling systems, practicality with easy color changing. In filter cabins, it is necessary to change

Medical Sensors are used for the detection of enzymes, proteins, blood, bacteria & other substances inside the human body so that the correct treatment can be administered should abnormalities occur. These sensors use a number of different Interference Bandpass Filters of different wavelengths dependent on what needs to be detected. With our wide range of stock filters, Knight Optical provide wavelengths from the UV at 214nm for detection of bloods into IR wavelengths of 2000nm for the detection radiation or gases. These interference filters are also available for full customisation to your specific requirement. They are mounted in an aluminium ring making it easier for integration, we can also provide filter wheels to ensure quick changing within the instrument.

Typically, the ASCO CO2 Gas Dosing System is used together with water desalination plants. The system is equipped with a CO2 pressure reducing valve, filtration unit, CO2 gas flowmeter, CO2 regulating valve, pressure gauges, safety valves and a completely prewired control cabinet. In case of maintenance the system provides a manual bypass line, which also can be monitored by the flowmeter. Herefore, changing a filter cartridge or doing any other service work on the system is quick and easy! As raw and fitting material ASCO uses mainly stainless steel. This makes the system very resistant and extends the products life cycle. easy to install very accurate 4 20 mA output signal robust stainless steel construction no auxiliary equipment like air compressor needed, only power supply is required

With us, your rotary blowers are in the best hands. This applies to regular Maintenance work such as oil or filter changes, up to complete overhauls of your units, at our factory or at your site. Of course, we also carry out this work on rotary lobe blowers of other makes.

The air purifier "LR 80 WIFI+" with H14 filter improves the indoor air and can help to reduce the risk of infection by viruses in closed rooms. The air purifier also reduces the concentration of mould spores, house dust, pollen, viruses, bacteria and odours in the air. The unit is equipped with 5 filters: 1. aluminium filter (washable) 2. ionisation filter 20 million ions/m³ 3. antibacterial filter 4. honeycomb activated carbon filter 5. highly efficient Hepa filter H14 with self-sterilising effect Special materials are added to the HEPA filter, which can achieve highly efficient sterilisation and reduce damage to the filter. The noise emission of the air purifier is 20 - 66 dB. Functions: Filter change reminder Parental control PM2.5 display Touchscreen Intelligent sensor system Wifi function Operation, control: control panel buttons + remote control

A few practical benefits: Fragrance diffuser- for perfect well-being the B 25 E distributes the fragrance which you choose thanks to scented oil tank No clogging of the filter thank to integrated scented oil tank 4 fan stages- for individual setting for your needs Automatic switch-off by full water tank- reduce the power consumption Integrated Hygrostat with 5 humidity values- easy setting up of a well-being Filter change indicator Lime and germs remain in Filter Night mode with dimmed LEDs, for uninterrupted sleep Holder for Secosan Stick- keeps the water clean and uncontaminated 360° distribution of air- the humidified air is evenly distributed in the entire room Refillable with normal tap water- the distilled water is not needed Very quiet operation Big water tank – 3 liters Low power consumption Also suitable for workplace, because it is very stable despite of small and compact dimensions Filters in scope of delivery

Powerful air purifiers free your indoor air from everything that contaminates it -and this reliably and whisper quietly. Filter pollutants and impurities such as dust, fine dust (PM10, PM2.5 and smaller), pollen and bacteria from the room air. The growth of mould spores is also effectively prevented by the innovative "AP80 Pro". The air purifier also reliably filters odours such as cigarette smoke, exhaust gases (including NO2), ozone and chemical vapours (formaldehyde, toluene, n-butane, VOC). Control the air purifier via a quickly understandable control element including a practical remote control. Here you set 3 power levels manually. Use the integrated lock mode and the timer if the start or stop time is outside your presence. A particularly low-noise night mode can also be set. The "IDEAL AIR PRO" app also enables detailed setting and display. The 360° filter must be replaced every 12 months on average. The practical filter change indicator informs you about this.

Pneumatic two-wheel trolley, handle and anti-vibrating feet High-performance piston pump with connecting rod system Automatic pressure bypass valve with pressure relief from the pump head Automatic bypass valve Pressure adjustment Thermal valve / gearbox Integrated detergent suction Powered by Honda gasoline engine with low oil level sensor Inspectable oil levels for pump and gearbox GX390 1,750 Weight 64 Kg Oil plugs drain and discharge ports for easy maintenance and oil changes Inspectable water filter

The HB 5010 is a hot melt adhesive tank system with gear pump, especially for manual applications. Together with the hand gun HB 910, the tank system is ideally suited for all bead or spray bonding. The construction of the simple menu navigation of the control unit is so user-friendly that the intuitive operation of the device is possible even for untrained personnel. The extremely resilient plastic housing has a dirt-resistant paint finish. The modular structure of the system increases the ease of maintenance and ensures good accessibility of the parts when servicing. A filter change is possible without additional disassembly. A conveyor system with gear pump ensures a constant volume per unit of time. The simple design of the pump makes it robust and inexpensive. The construction of the pump also enables the processing of polyamides up to 210°C. Up to 2 heatable hoses can be connected. In combination with application heads, automation of simple tasks is possible.

Systematic maintenance of your vacuum massage equipment is a guarantee of proper functioning and effectiveness of your treatments. It is also important in terms of hygiene and reducing the risk of malfunctions. We offer replacement air filters for the Cellu M6 which are compatible with KEYMODULE TM, ENDERMOLAB TM, LIPO M6 and INTEGRAL M6. These filters should be changed every 40 hours. The need to change the filter will be displayed on the device monitor. The offer applies to one filter for the CELLU M6 machine. We invite you to take a look at the full range in our shop. The offer also includes a wide selection of treatment clothing, e.g. massage costume for women, disposable treatment thongs for women and men, men’s briefs and boxer shorts. LaSpa is one of the leading manufacturers of clothing for SPA and beauty salons. From the very beginning, we have set ourselves the goal of providing only the highest quality products. Our effort has been appreciated

PRODUCT DESCRIPTION MULTITRANS PLUS SYN ATF is a high-quality, fully synthetic automatic transmission fluid. It holds OEM approvals from ZF Friedrichshafen AG for ZF TE-ML 14C and ZF TE-ML 20C specifications, as well as Voith Turbo GmbH & Co. for Voith 55.6336.XX (G1363) specification. This makes it suitable for a wide range of vehicles, including North American, European, and Asian cars, buses, trucks, and industrial equipment. Under the ZF TE-ML 14C standard, this fluid allows for extended oil and filter change intervals. For instance, in ZF Ecomat powershift transmissions in buses, intervals of up to 120,000 km or two years are feasible. In the case of trucks and off-road equipment, it permits oil and filter change intervals of up to 1500 hours/1 year under normal conditions or 1000 hours/1 year under severe conditions. Similarly, under the ZF TE-ML 20C specification, it enables intervals of up to 120,000 km or two years in ZF Ecolife powershift transmissions in buses.

installation of bagtype filters, panel filters, compact filters, filter pads, HEPA filters and activated carbon cartridges 30 mm air duct flanges connecting duct to upstream and downstream side tightly closing, lateral maintenance door with hinges and sash lock fasteners spacesaving simple toolfree filter change maintenance door optionally in right or left air direction

The EndoFlex™ is an advanced endothermic gas generators with an extensive list of features to improve gas reaction efficiency while also providing sensors to diagnose most common gas generation issues before they become problems. FEATURES & BENEFITS • Lower operating costs and emissions waste from 20-80% of generator capacity • Automatic endothermic gas pressure control eliminates regulator adjustments • Multi-retort design reduces cost, allowing for quick replacement of components • Separate methane sensors provide data for scheduling retort burnout • Filter change indicator improves system effi ciency and operation time • Built-in software for ease of scheduling, maintenance, and paperless data logging

The Effect Soot build-up in diesel particulate filters only burn without the use of an additive at a temperature of 500 to 600 °C. These values are not reached in normal operation. ERC CatClean works catalytically and reduces the ignition temperature of the soot to approx. 350 °C, and so continuous burn-off of soot is guaranteed even at low-load and correspondingly low temperatures. The Result ERC CatClean ensures a permanent, additive-supported regeneration of the diesel particulate filter during operation. Soot particles are continuously cleaned from the filter by direct burn-off without maintenance, downtimes, or problems. ERC CatClean is suitable for every filter material and does not change the diesel quality. The benefits at a glance: - Special additive for application in diesel fuel to burn off soot deposits in diesel particle filters - CatClean works catalytically and reduces the ignition temperature

Pharma Design - Series H 630 - 1600 P The HEINKEL horizontal peeler centrifuges in pharma design are characterized by easy cleaning and inspection avoiding product contamination. Special properties for the customer’s benefit: Swinging open housing for easy inspection Clean room installation possible Hydraulically operated housing locking mechanism by single clamping elements, therefore minimal area for product deposit Fully automatic, validated CIP-process possible Design virtually free of dead spaces, minimized number of screwed connections in the process housing Filtrate outlet at the rear part of the process housing, low dismantling expenses to prepare for the opening of the housing High flexibility at frequent product changes Quick change of the filter element Bearing designed as exchangeable unit

The tube filter is a compact, economical and versatile filter available either as a particle filter or as a coalescence filter. It is easy to use and filter changes can be made quickly. It is fitted with an female thread and is also available with a shut-off or drain feature. In the COMPACT version, the tube filter is already equipped with integrated flexible tube connectors.

The coalescence cartridge filter are compact, economical and versatile available either as a particle or as a coalescence filter. They are easy to use and filter changes can be made quickly. The cartridge filters are fitted with an internal thread and are also available with a shut-off or drain feature.

Gas Filters WITT gas filters allow the reliable filtration of the finest dirt particles in gases. Depending on the respective version, the gas filters can filter out particles from 3 to 40 micron and extend the service life of downstream equipment. The WITT gas filters provide high flow rates and multiple connections. WITT gas filters can be used for many technical gases. The gas filters – with or without condensation outlet – are designed for installation in pipelines or at outlet points. Gas filters can be changed while installed.

It is designed using a very rugged LDMOS transistor. So, its efficiency is very high. Max. Input power is 50W. It has reflection, current and temperature protections. Output power can be set to lower powers. It has a room temperature and humidity sensor inside, so it automatically runs airconditioner according to transmitter room air condition. It keeps event logs. It has a remote control via an ethernet or 3G/4G USB stick. N+1 redundancy system is ready to use. With the improved touchscreen software, all information about transmitters running state can be seen in one screen. Configuration, and getting help is on the same screen. RF part, DC part, and RF Filter can be accessed by separated covers. This allows for easy maintenance and service. LCD Touchscreen Control 4 Rack Unit size Stainless steel very rugged case Easy maintenance and service Hot-swappable current sharing power supply units Easy to change / clean air filter

The EPC Spot is our measuring device for a random check of the gas levels of O2/CO2 in packaging or packaging machines. A sample is taken by a special needle. Due to the small amount of gas the analyser needs for the measurement, blister packs or ampoules can also be tested. As a user, you can enter several limit values for different products in the device. The result is then additionally visualised in red or green. All measurements are stored in the device and can be further processed in various ways. Advantages - Over 20 years of experience in development and optimisation - Top response time and short heat-up phase - Two different sizes for added flexibility - Long average life components - Digital measurement data logging - User-friendly filter change - 5.7 inch touch screen - Intuitive menu navigation - in many languages

The EPC VM is our measuring device for monitoring O2/CO2 in packaging machines. In addition to continuous measurement of the gas atmosphere, spot measurement of individual packages is also possible. The functionality is the same as with our Zr-Ox EPC spot analyser. Once set, the analyser can also control the gassing of the machine. Advantages - Over 20 years of experience in development and optimisation - Top response time and short heat-up phase - Two different sizes for added flexibility - Long average life components - Digital measurement data logging - User-friendly filter change - 5.7 inch touch screen - Intuitive menu navigation - in many languages - Various RS232 protocols that can be changed in the unit for communication with different soldering, packaging soldering, packaging machines, analysers or other equipment and processes - Operation for user and administrator in different levels

The EPC SMC is equipped with an integrated proportional valve. This allows the analyser to automatically regulate the gassing in a wide range of processes. All settings for the control can be configured on the unit or via external signals. This means that the customer is not required to control the process completely manually. This gives you the option of controlling the gassing at our analyser or at the plant. For some processes, a single adjustment is sufficient and the production runs fully automatically from then on. Advantages - Over 20 years of experience in development and optimisation - Top response time and short heat-up phase - Two different sizes for added flexibility - Long average life components - Digital measurement data logging - User-friendly filter change - 5.7 inch touch screen - Intuitive menu navigation - in many languages

Our EPC 3GAS analyser is a more flexible variation of the basic model. The device changes the measurement automatically or externally controlled in order to monitor several processes simultaneously or consecutively. The change of the currently active measurement from process 1. to process 2. is done either by an external signal or in an adjustable time interval. Since our sensors can determine the oxygen concentration very quickly, time intervals of 30 seconds are realistically achievable. With desired concentrations of approx. 500 ppm, this is completely sufficient. Advantages - Over 20 years of experience in development and optimisation - Top response time and short heat-up phase - Two different sizes for added flexibility - Long average life components - Digital measurement data logging - User-friendly filter change - 5.7 inch touch screen - Intuitive menu navigation - in many languages

The Zr-Ox EPC is our standard model for continuous monitoring of residual oxygen. Advantages - Over 20 years of experience in development and optimisation - Top response time and short heat-up phase - Two different sizes for added flexibility - Long average life components - Digital measurement data logging - User-friendly filter change - 5.7 inch touch screen - Intuitive menu navigation - in many languages - Various RS232 protocols that can be changed in the unit for communication with different soldering, packaging soldering, packaging machines, analysers or other equipment and processes - Operation for user and administrator in different levels - Standardised 0/2-5/10 VDC or 00/04-20 mA analogue signal adjustable - 3 backups for storing different unit functions and settings - Display of all alarms and errors

0-29 in HgV (to 33 mbar abs) If you thought you couldn't afford the water costs associated with operating a liquid ring pump…think again. One of the wonderful features of the liquid ring pump is that it can be operated with a multitude of different fluids. A self-contained oil sealed system has a number of benefits over a traditional water sealed system: It eliminates water usage and disposal costs; it allows you to install it in remote locations where water may not be available; it allows you to attain higher vacuum levels than with water; it can prevent the condensing or dissolving of a process gas; it permits anhydrous processing with a liquid ring pump. Self contained system complete with off of the components for your basic operating needs. Standard components include: pump, TEFC motor, coupling or v-belt drive, drive guard, separator with oil mist eliminator, air cooled heat exchanger, recirculated seal line controls and high temperature alarm switch. Options include: inlet isolation valve, inlet check valve, vacuum relief valve, inlet filter, control panel and system skid plate. An oil sealed liquid ring system is more tolerant of carryover and wear, and it provides quiet operation. The oil is not required for lubrication which means it can operate at extremely long intervals between oil changes, easily going more than 10,000 hours with no down time. Aside from a periodic oil and filter change, the system can run for years with no scheduled maintenance. If your process requires very deep vacuum, Gardner Denver Nash has the solution. Using a two-stage liquid ring pump in an oil sealed system, vacuum levels lower than 10 Torr (29.6" HgV) can be attained.

Forvac Services are experts in Industrial Vacuum andExtraction. We can service, maintain and repair any make, brand and model of industrial vacuum and dust extraction equipment to suit your budget. Servicing and maintaining your vacuum equipment, extends its working life, ensures optimum running efficiency and minimises the risk of a breakdown or mechanical failure. The environments and harsh conditions that Vacuums and extraction systems are subject to, such as damp conditions, low temperatures, high temperatures, long running hours or long periods of non-use, can all effect how the equipment runs. With Forvac performing regular tests & checks, removing and replacing consumable parts, changing vacuum seals, filters and fluids, we can ensure your vacuum equipment is in top shape for when you need it most. Forvac’s engineers are experienced in servicing all makes and models of industrial vacuums and LEV’s regardless of size, age or condition.

Baghouse dust collector with dirty air inlet in the hopper, screw conveyor and rotary valve, extraction of the bags from above The Pulco Air NTC baghouse filter is a dry filtration system used to treat a wide range of pollutants. Its installation allows treatment of a vast range of pollutants. The dirty air enters the hopper directly, while the filtrated powder is unloaded through the combined action of the screw conveyor and the rotary valve. Benefits The baghouse filter is composed and configured on the base of the type of use and the specific requirements of the client. The Pulse Jet Cleaning System is managed by a PLC with a sensor that reads the pressure drop of the filtering elements encouraging minor compressed air consumption and greater duration of the bags. The hopper includes a screw conveyor and rotary valve to continuously unload the filtered powder. The ladder and the railings allow convenient access to the roof of the filter to change and maintain the filtering...

Our BlueClean® HC PRO range of horizontally mounted cartridges are designed with maintenance and ease of use in mind. With multiple configurations available, this versatile range is suitable for a wide range of process requirements. True downflow cleaning technology with the dust laden air entering the unit at high level flowing downwards through the filter unit chamber using gravity and downwards air flow to aid dust release We install a single filter cartridge in each aperture reducing the number of filter seals present within the filter unit substantially reducing the risk of filter seal failure and dust by pass. With using a single filter element this provides a more active filter cleaning area improving the filter cleaning action. Our single filter cartridge design per access door reduces the risk of dust exposure when withdrawing filter elements. Ease of maintenance with tool less filter cartridge change.

Double filtration system is used in our high pressure coolant sytems. They are easily removable and cleanable. On the other hand, especially the main feature of this system is not to be obligated to stop machine during cleaning and changing filter. One filter can be operated with machine while another is been cleaning. This will provide you the time saving during filter change Multiple Manifold Block with 4 outlets is provided as standart in this model. However, it can be manufactured over 4 outlets depending on your requirements at your machining process. HP2 High Pressure Coolant Units are used as mobile station. They have wheels under units and you may easily move it where you prefer them to be placed at your workshop.