Fillers and primers - Import export

TECHNICAL PROPERTIES Primer filler for vertical surfaces or for use on ceilings made from poured concrete or pre-slabs. Decorating filler, for smoothing over. Smooth, matt finish. Odour-free. COMPOSITION AND APPEARANCE. Solvents : Water. Filler : Calcium carbonates. Additives : Dispersing agent, bactericidal fungicide. Thickeners : Cellulosic, polyacrylates. Binders : Acrylic dispersing agent. Density : 1.86. Dry matter : 75%. TECHNICAL PROPERTIES • Fire classification: A2-S1, d0 SUITABLE SURFACES Interior : ideal for covering bricks, brick tiles, cement breeze blocks, cinder blocks, de-bubbling pre-slabs, shuttered concrete, aerated concrete, for redecorating stippled walls or old damaged surfaces. APPLICATION. • The first coat should be levelled out using 60 cm scraper or skimmed with a rule. • After drying, the second coat should be smoothed with a scraper. • After allowing to set slightly, squeeze the filler at a slight angle using a clean scraper.

TECHNICAL DEFINITION CE 78 PERFECT’LIGHT is a lightweight ready-mix paste specially formulated for jointing mitred-edge plasterboards in association with plaster tape. COMPOSITION AND APPEARANCE Resin, water, calcium carbonate, lightweight fillers, preservation agent and various adjuvants. The paste is white. COVERINGS. Plasterboard primer. Smoothing filler. REFERENCE DOCUMENTS • CE marking • DTU 25.41 and DTU 25.42 • NF EN 13963 • DoP PACK SIZE 20 kg buckets on covered pallet. STORAGE 12 months in original unopened packaging away from frost and high temperatures. APPLICATION Before actual jointing, fill any accidental gaps between boards and any other areas (spalls, deterioration of the surface etc.). Apply manually by «buttering» the mitred-edge using a 10 or 15 cm plaster spatula and then adding the tape Then add a finishing coat, allow to dry and finish to hide the tape. Also hide the screw heads. For projecting vertical edges, use reinforced tape.

TECHNICAL DEFINITION CE 78 PERFECT’JOINT is a ready-mix paste specially formulated for jointing mitred-edge plasterboards in association with plaster tape. COMPOSITION AND APPEARANCE Resin, water, calcium carbonate, thickener, pre- servation agent and various adjuvants. The paste is white. SUITABLE SURFACES All types of plasterboard with or without insulation (glass wool, rock wool, polystyrene) with mitred edges and carded surfaces. COVERINGS Plasterboard primer. Smoothing filler. REFERENCE DOCUMENTS • CE marking • DTU 25.41 and DTU 25.42 • NF EN 13963 • DoP PACK SIZE 7 and 25 kg buckets. STORAGE 12 months in original unopened packaging away from frost and high temperatures. APPLICATION Before actual jointing, fill any accidental gaps between boards and any other areas (spalls, deterioration of the surface etc.). Apply manually by «buttering» the mitred-edge using a 10 or 15 cm plaster spatula and then ad- ding the tape (milled face against the jointing coa- ting).

TECHNICAL SPRAYS TSP 110primer light grey 400ml TSP 120primer grey 400ml TSP 130primer dark grey 400ml TSP 140primer white 400ml

Surface preparation; Before starting the application, the surface should be cleaned of dust and anti-adhesive substances. The smoothness and mechanical health of the application surface should be checked. Application; The appropriate consistency of the mortar is 25 kg of joint filler in 5-7 liters of water. With a low-speed mixer, the joint filler is mixed into clean water for 3-5 minutes so that no lumps remain. The mortar, which is left to rest for 5 minutes, is mixed again for a short time and becomes ready for use.

PX 07 is a single-component, colourlessly drying dispersion of styrene-acrylic copolymer. It is used for priming absorptive, mineral substrates before application of anti-graffiti coating, which minimises or prevents the covered surface form darkening. It also enhances and evens out its absorptiveness. The product perfectly penetrates into the surface while improving its adhesive properties thanks to small size dispersion particles. PX 07 allows diffusion, has hydrophobic properties, protects the surface from penetration by hazardous substances and is UV and erosion resistant.

Terracol SL 320B is a 50% emulsion of vinyl acetate and VeoVa-10 versatic acid vinyl ester that forms a transparent glossy film with excellent physical and chemical properties. Contains dibutyl glycol acetate to improve film-forming properties. CONTAINER: Eurocube 1000kg, Plastic barrel 40kg Terracol SL 320B, thanks to the effective protective function of VeoVa-10, has excellent resistance to the main adverse atmospheric influences: UV rays, temperature changes, rain and high alkalinity of the main types of building surfaces. Therefore, paints, fillers, primers and other finishing materials based on TERRACOL SL-320 B are favorably distinguished by a longer service life.