Fibre - Import export

The mould construction fleece is particularly well tensile and conformable. It is also ideally suitable for complicated parts and moulds. Since this fleece is produced of 100 % polyester fibres, it can be processed with epoxy and polyester resin without any problem. The resin consumption is approx. 1.5 – 2 kg/m² depending on the application. It is ideal for producing free forms.

Protective fivefingers gloves, the outside layer is made of the Kevlar© (Aramid) fibre and the inner layer is the loop wave cotton insert. The gloves are designated as a protection against contact heat of 250°C. In the practice it means that any object of 250°C can be held by this mitten longer than 15 sec. In addition these mittens guarantee a high cut resistance. The comparison table of values according to EN 388

* Loss-in-weight FiberXpert feeder for long and uneven fibers (natural fibers, wood fibers, carbon fibers, etc.)* Also suitable for film chips and shredded film strips cut off by film edge trimmers * Technical features: special fiber screw, large steep walled hopper, novel design and special position of the stirring agitator in the hopper * High-tech weighing system with digital load cell or * high-resolution strain gauge load cell for high weighing accuracy Power range 200-19900 dm³/h

Owens Corning® Milled Fibers are designed to enhance mechanical properties, increase stiffness, improve dimensional stability, and minimize distortion under elevated temperatures. EXCELLENT DISPERSION & IMPREGNATION Predispersed nature promotes excellent dispersion in the matrix. Shortfiber thermoplastic compounds will show improved melt flow characteristics with shorter input fiber lengths. IMPRESSIVE AESTHETICS Fiber length and excellent distribution qualities provide a homogeneous, highly pigmentable surface with limited fiber prints and good color. ENHANCED PART STRENGTH Glass reinforced parts exhibit improved mechanical properties, modulus and dimensional stability. Powder Relatively freeflowing with a high bulk density for use in formulations requiring very uniform dispersion and short fibers with median fiber lengths typically in the range of 40 110 microns.

Milled peat Fraction:0-20 mm Raw material: sphagnum black-brown peat, wood fiber, fiber Chemical characteristics: EC 0,4-0,7 mS/cm pH 5,2-5,8 (H2O) Additives: Limestone 3,0kg/m3 NPK Multimix 0,5 kg/m3 Radigen 0,1kg/m3

Strength and rigidity qualify carbon fibre reinforced plastics (CFRP) for all areas in which high mechanical loads occur, but the weight should remain low.

Super light air ducts made of carbon fiber. These are mostly used as a connection for additional ventilation hoses

Neaustima produces fibre balls for cushions, upholstery furniture, toys.

For high-tech applications requiring high strength and stiffness combined with light weight, SIGRAFIL continuous carbon fiber tows are indispensable. They form the basis for high-performance composite materials such as textiles and prepregs, as well as components made of carbon fiber-reinforced plastic (CFRP). Carbon fibers are used in the automotive industry, in aerospace, in wind turbines, but also in sports equipment or mechanical engineering. By applying different types of sizing, the carbon fibers can be optimally matched to different matrix systems.

Based on proven experience with the realisation of past successful projects MPS has designed and characterised a scalable Theta/Phi fiber positioner for Multi-Object Spectrographs. The positioner has been designed with the purpose of adapting readily to the requirements of any Multi-Object Spectrograph, which requires precise positioning of optical fibers. Whether MOONS, FPS, MEGARA, or DESI, each project has so far developed its own fiber positioner from scratch, with all of the risks and long lead times linked to such a complete new development. The positioner presented here intends to significantly reduce the development time, costs, and eliminate unforeseen risks. The design is easily scalable in size, length, and shape. The positioner size starts at a diameter of 9.5mm and is scalable to fit any customer specific requirements. It is capable of reaching any target within 5 µm with just two correction moves.

EFFECTS AND ADVANTAGES It offers relaxation and optimum comfort It improves circulation and prevents swellings DIMESNIONS 55x18 COMPOSITION Terlenka or poplin with silicone padding polyester fiber. MANTEINANCE Hand wash or machine with nonabrasive products .Maximum temperature 30 °It can be dry cleaned with perchlorethyleneYou can not use chlorine bleach .You can boardYou can tumble dry.

EFFECTS AND ADVANTAGES It helps to adopt a correct position in the bed providing the maximum confort COMPOSITION Core of silicone padding polyester fiber, it founds of terlenka. DIMENSIONS high x width x deep 40x54x56 MAINTANCE Wash hands with nonabrasive products . Dry flat . Do not iron. Do not bleach. Do not dry clean.

Within the natural fibers we find the hemp, as a textile fiber its most prominent characteristic is its high resistance to tensile stress, this fiber is biodegradable, light and resistant, once is woven it can be as soft and versatile as cotton, being more strong, more stable, more durable and with greater water absorption capacity. Hemp fibers are among the most versatile natural fibers and have evolved a lot from the thick, coarse fibers they were decades ago. We have several qualities, and types according to market applications, for insulation, non woven, or mercerized and cotton spinning.

We produce virgin 100% polypropylene fiber from dtex 4 to dtex 10, in High Tenacity and with treatment UVI in ​​different lengths of fiber, and FDA certificates for Food use , in white, black and colors They are destined for various applications, geotextiles, carpet, automotive and specific materials for the construction.

The already simple application of our innovative polymer fiber filter FIBALON® is made even easier with our new FIBALON®rope. 8, FIBALON® nets arranged like on a rope of pearls for almost all common pool filters. The filter material can be removed and replaced with just one handgrip. Our special mesh ensures optimal alignment and orientation of the FIBALON® filter balls during the filtration process. In addition, the net acts similarly to a protective shield. By means of a special welding technique, both the net and the welding seams, are chemically- and in particular chlorine-persistent. Due to the use of the new FIBALON®rope, the application of our backwashing grid is obsolete. For FIBALON®rope we also use our optimized fiber combination and other process innovations offers an incomparably high selectivity of 8 microns. All advantages of FIBALON®3D can be adapted and it promises an even easier handling.

FIBALON®3D offers you excellent filter performance for all common swimming pool filters. Only 350 grams of it replace 25 kilograms of filter sand or 20 kilograms of filter glass. FIBALON®3D filters particles down to 8 microns and due to its fiber fixation, it filters nearly pressure-less. Additional it is made out of recycled PET-bottles. This leads to an energy saving and environment friendly product. The interior of the fibrous ball consists of a slightly denser core and a softer wrap. The balls nestle together to form a consistent filter bed. The deliberately chosen spherical shape maximizes the filter media’s surface area. We also developed the fiber fixation DyFix® which yields an unusually high particle retention rate and deep penetration of particles into the FIBALON® media bed to provide excellent filtration results. FIBALON® leads with minimum weight to an excellent energy balance compared to conventional filter media.

TROL as niche product is mainly used as technical fabric and needle felt in the field of industrial dedusting and liquid filtration applications. Teperature resistance TROL® posses a 35 °C higher temperature resistence compared to conventional PP. Continuous temperature resistance is 125 °C, peak temperature is max. 135 °C (< 200h/year). Hydrolysis resistance TROL® consists of saturated hydrocarbon chains. Hydrolytic cleavage and corresponding deterioration of the polymer does not take place.

Cutting thicknesses (mm); 750W 1KW 1,5KW 2KW MildSteel 8mm 10mm 12-15mm 16mm Stainless Steel 3mm 4mm 6mm 8mm Aluminum 2mm 3mm 4mm 6mm Copper - 2mm 3mm 4mm Brass

Made of %90 recycled cellulose fiber and %10 Selennizza SLN high quality asphalt additive. Available at any size between 5 - 7 mm diameter . in 600 kg or 1200 kg big bags.

The company has 2 fiber lasers, with which it performs cutting both for its own needs and for customers. Our goal is to provide good service, which means fast response, excellent quality, competitive prices. Laser cutting machines are equipped with two removable replaceable tables measuring 1500 x 3000 mm and it is adapted for continuous three-shift mode. The maximum cutting thicknesses for the different materials are: Mild steel - 20 mm Stainless steel - 12 mm Aluminum - 12 mm Copper - 5 mm Bronze - 5 mm

Characteristics: 145 g/m² 100% Cotton Long handles: approx. 65 cm Stitching on the handles for greater stability Internal overlock seams Cross Stitched Dimensions: 38 x 42 cm Maximum print area: 30 x 30 cm Suitable for embroidery, Screen, DTG and transfer printing

Rib made with 60%Recycled Cotton 40%Recycled Polyester. Fantasy fabric with feminine look and soft touch. Great for loungewear and comfortable pieces.

Product prepared with 8 – 10 % emulsifier and mineral base oil gives milky oil in water emulsions for textile fiber processing. Used for textile oil preparation for spinning, synthetic and wool fiber blending, cone transferring, kamgarn and streighgarn spinning operations Nonyl Phenol free nonionic type emulsifier package gives highly hard water resistant stable emulsions up to 100 DH Emulsifies easily and gives high degree of lubrication and washability. Eliminates static electric deposition during spinning

solidian REBARs are combining highstrength fibers with extremely resistant resins in the production process named pultrusion. Here carbon or glass fibers are oriented extremely straight, impregnated by resin and hardened. solidian REBARs are realizing unbelievable high and durable loadbearing capacities up to most extreme demands. This is the result of the combination of the straightness of the fibers and the selectable big diameters of the crosssection. As such solidian REBARs are accessible onsite. So they are the ideal noncorrosive substitution for metallic reinforcements for everybody who is interested in economical and ecological sustainability. corrosionresistant thinner concrete cover, longer service life, lower refurbishment costs reduced weight with higher tensile strength high tensile strength lower overall construction costs electronically isolating and nonmagnetic

We produce decorative cushions with filling and cushion covers in all shapes (square, ring, heart, star, cylinder, etc.) and with many different kinds of decorative accessories.As a filling we use: ball-fiber 100% PE, feathers.

We produce decorative bolsters with filling and cushion covers in all shapes (square, ring, heart, star, etc.) and with many different kinds of decorative accessories. As a filling we use: ball-fiber 100% PE.

There are several types of squash, but they are known for being rich in vitamin A, C, and B9, and for having a high copper and zinc content. Due to their high density in minerals and other trace elements and fibers, they are considered to have cardiovascular protectors and delay aging. Squash have properties that improve the glandular function of the prostate (recommended in cases of inflammation), it is refreshing, diuretic, slightly laxative and cleanses the body, preventing putrid fermentation. One of their other characteristics is the effect they have on the pancreas by stimulating the secretion of insulin.

#Description Taihan Fiberoptics co., ltd. refers to the technology and the medium associated with the transmission of data as light along a pure strand of glass, which is a thin as a human hair. With the increasing use of multimedia data and the advancement of wire and wireless services, the demand for optical fibers is increasing. Our lower bend loss optical fibre is best suited for your network enabling high network performance and significantly lower installation costs. We offer range of 250um and 200um Bend Insensitive Single Mode fibre and Non-Zero Dispersion Shifted Single Mode fibre (NZDSF) solutions suitable for 5G and FTTx applications. #Products - Low Loss optical fiber - Non Zero Dispersion Shifted optical fiber - Bending Insensitive optical fiber - Micro Diameter optical fiber - Multi mode optical fiber