Fibre optic systems - Import export

PMA cable protection systems are used wherever the mechanical protection of electrical lines and cables is needed. Highly flexible cable protection tubes are specifically suited for the additional protection of cable guides in e-chain® systems. Due to the combination of technical knowhow and the strictest international safety guidelines, PMA fulfils the worldwide requirements of industrial markets in application areas like mechanical engineering, automotive construction, fiber optics, solar systems as well as applications in the robot sector with high speeds and millions of alternate bending cycles.

Safe energy and data transmission The igus® Chainflex® cable range offers a choice of over 850 different cables, available from stock. A main focus of the range are the data and bus cables. Solutions based on copper, glass or plastic fiber optic cables are provided for almost all bus systems in industrial use. We continue to provide you with all supply cables for your drive systems such as motor cables with and without brake/tacho cables and the matching feed cables. Ready assembled with plugs and sockets on request. Cost-reducing assembly The use of pre-assembled E-ChainSystems® enables expensive assembly hours at the place of installation to be considerably reduced. Functionally tested systems guarantee that plant components are soon put into operation. Assembly service We would be pleased to send you an offer for complete solutions, including all assembly services. You do not tie up your own resources and you have a trouble-free energy supply system for the future at a fixed price. LBT FLIZZ® - High speeds and accelerations Travel distances up to 120m, travel speed up to 8 m/s Suitable for moving or stationary controls, ideal for all bus systems When light weight is required When quiet, maintenance-free operation is required When rust-proof property is required At -10°C to +60°C constant temperature At accelerations over 10 m/s² Energy supply system for all media, not only electrical Also suitable for outdoor use (with reduced load data) Your benefit from LBT FLIZZ® Guaranteed service life Cost-effective compared with conventional energy supply systems Cable protected against dirt, rain, sun, ice, snow and leaves Insensitive to wind and motion Good resistance to chemicals, solvents, etc. Use of special cables possible, e.g. servo drive cables, fiber optic cables, bus systems etc. almost maintenance free Quick and easy installation due to delivery as a ready-assembled system Easy integration with existing plants Cable length 50% of the travel distance No central cable junction No effort required to maintain carriages Sewage treatment plant Longitudinal scrapers Sand traps Rain water overflow reservoir Galvanizing equipment Cranes Plant construction Space-saving and compact energy supply with LBT FLIZZ® - low maintenance system, delivered pre-fitted with ready-assembled igus® E-Chain Energy supply system protected from wind and weathering. The used materials are weather-resistant, as well as resistant against most chemicals, oils, fats, coolants and solvents Solid plastic with powder-coated support tubes Modular assembly: the system can be enclosed with intermediate panels! Can be delivered pre-fitted Variable fields, which are simply screwed on top of each other Glide rail integrated in the profile

Based on our rotary solenoid D2, Kendrion offers a wide range of highly reliable optical shutters for blocking light and laser beams in the field of optical safety technology. The optical shutter D23 forms the technical basis with remarkable properties and can be used in a wide range of applications, e.g. in medical instruments, aeronautical instruments, fiber optic signal transmission systems and in mass photometry. The D23 optical shutter impresses with maximum reliability, durability and a fast switching time of approx. 15 ms. With at least 10 million switching cycles, the Shutter D23 is designed for reliable continuous operation.

Blower turbo-massage (optional for the ELITE system) Once assembled, this optional introduces a supplementary air debit into the air base lines, supplied by a turbo-blower 1Hp. Activating the blower leads to air enrichment of the air-water jets and implicitly, to an energic, sportive hydro-massage. The optional is a standard endowment in the superior systems of ELITE system. Supplementary multi-LED spot (optional fot ELITE and ELITE TURBO system) The supplementary spot is the same type as the one previously described. The second spot has a syncronized functioning with the first one, increasing the intensity of the light show. The optional has a standard endowment in the superior systems of ELITE TURBO system. Optic fibre STARS20 illumination (optional for ELITE, ELITE TURBO and ELITE TURBO PLUS systems) The colored light provided by a multi-LED EFX22 module, installed in a dispersion body in the optic fibre, is transmitted through optic

Fiber optic patch cables are ideal for supporting high-speed telecommunication network fiber applications. General use of these cable assemblies includes the interconnection of fiber cable systems and optics-to-electronic equipment.

The DIAMOND Network Acceptance (DNA) Kit is an FBG-based (Fiber Bragg Grating), easy-to-use testing system for fiber-optic P2P networks. The system provides the capability of a clear Optical Line Identification (OLiD), thanks to the integration of FBGs within connectivity components. This allows the line integrity and link correctness to be checked from a single access point. OLiD is a technically valuable and efficient alternative to the time-and resource-consuming red-light examination method. The system does not interfere with the standard telecom P2P operating bandwidth, therefore it can also be used on lines that are already active.

MODULAR CONSTRUCTION The system comprises five main components whose frames have been designed for later installation of various options. This allows the machine to be upgraded at moderate cost as the need arises, e.g., for ring marking, higher UV curing performance, etc. MAIN COMPONENTS TPO1-K Autotraversing Pay-off Unit CCD1-K Coloring and UV curing Station Ink supply system, high-speed coating head, and high performance M550 UV irradiator unit mounted on a common frame. UVM1-K Second coloring and UV curing Station for speeds up to 3000 m /min TUD1-K Take-up High-speed capstan and take-up system with separate control cabinet. PCI1-K Control Unit FEATURES Fiber tension sensors ensure optimized fiber tension control. Automatic reel size detection makes it extremely easy for the operator to adjust the traversing system New M550 UV irradiator with control system that constantly measures the irradiator power and automatically adjusts the power

In addition to our wide range of passive fiber optic system components you can also receive the necessary accessories from us, such as splice cassettes, splice protection holder, splice protection tubes and measuring launch fiber cases. Thanks to our in-house assembly department, we can realize every customer request.

Range of application fiber optic transmission systems in public telecommunication networks, service networks and dedicated networks if connected to the public communication network, installation between buildings of different types, installation in communication lines, on power lines and automatic control lines of electric railways at points with a maximum electric field potential of up to 12 kV, inside protective PE pipes (including air blowing installation), in swamps, in cable trays, in ducts, tunnels, sewers, on bridges and overpasses.

Range of application fiber optic transmission systems in public telecommunication networks, service networks and dedicated networks if connected to the public communication network, installation in grounds 1 3 types and in rodent infested grounds as also in cable duct systems, pipes, over bridges and overpasses, for installation in asphalt and concrete pavement.

Range of application fiber optic transmission systems in public telecommunication networks, service networks and dedicated networks if connected to the public communication network, installation in grounds 1 3 types and in rodent infested grounds as also in cable duct systems, pipes, over bridges and overpasses, for installation in asphalt and concrete pavement.

Range of application fiber optic transmission systems in public telecommunication networks, service networks and dedicated networks if connected to the public communication network, installation between buildings of different types, installation in communication lines, on power lines and automatic control lines of electric railways at points with a maximum electric field potential of up to 12 kV, inside protective PE pipes (including air blowing installation), in swamps, in cable trays, in ducts, tunnels, sewers, on bridges and overpasses.

Range of application fiber optic transmission systems in public telecommunication networks, service networks and dedicated networks if connected to the public communication network, installation between buildings of different types, installation in communication lines, on power lines and automatic control lines of electric railways at points with a maximum electric field potential of up to 12 kV, inside protective PE pipes (including air blowing installation), in swamps, in cable trays, in ducts, tunnels, sewers, on bridges and overpasses, as well as winding, connecting and attaching to external load bearing power elements (ropes, wires, etc.) at points with a maximum electric field potential up to 12 kV.

Range of application fiber optic transmission systems in public telecommunication networks, service networks and dedicated networks if connected to the public communication network, installation in communication lines, on power lines and automatic control lines of electric railways at points with a maximum electric field potential of up to 12 kV.

Range of application fiber optic transmission systems in public telecommunication networks, service networks and dedicated networks if connected to the public communication network, installation in communication lines, between buildings of different types.

Range of application fiber optic transmission systems in public telecommunication networks, service networks and dedicated networks if connected to the public communication network, installation in grounds of all types but for grounds subject to cryogenic deformations, in cable ducts, bridges and overpasses.

Range of application fiber optic transmission systems in public telecommunication networks, service networks and dedicated networks if connected to the public communication network, installation in cable duct systems, over bridges and overpasses, inside protective PE pipes (including air blowing installation).

Range of application fiber optic transmission systems in public telecommunication networks, service networks and dedicated networks if connected to the public communication network, installation in grounds 1 3 types and in rodent infested grounds as also in cable duct systems, pipes, over bridges and overpasses, for installation in asphalt and concrete pavement.

Range of application fiber optic transmission systems in public telecommunication networks, service networks and dedicated networks if connected to the public communication network, installation in grounds of all types as well as for grounds subject to cryogenic deformations, in cable ducts, bridges and overpasses.

Range of application fiber optic transmission systems in public telecommunication networks, service networks and dedicated networks if connected to the public communication network, installation in grounds of all types as well as for grounds subject to cryogenic deformations, in cable ducts, bridges and overpasses.

Range of application fiber optic transmission systems in public telecommunication networks, service networks and dedicated networks if connected to the public communication network, installation in grounds 1 3 types and in rodent infested grounds as also in cable duct systems, pipes, over bridges and overpasses, for installation in asphalt and concrete pavement.

Range of application fiber optic transmission systems in public telecommunication networks, service networks and dedicated networks if connected to the public communication network, installation in grounds of all types but for grounds subject to cryogenic deformations, in cable ducts, bridges and overpasses.

Range of application fiber optic transmission systems in public telecommunication networks, service networks and dedicated networks if connected to the public communication network, installation in communication lines, between buildings of different types.

Range of application fiber optic transmission systems in public telecommunication networks, service networks and dedicated networks if connected to the public communication network, installation in communication lines, between buildings of different types.

Range of application fiber optic transmission systems in public telecommunication networks, service networks and dedicated networks if connected to the public communication network, installation in communication lines, between buildings of different types.

Range of application fiber optic transmission systems in public telecommunication networks, service networks and dedicated networks if connected to the public communication network, installation in cable duct systems, over bridges and overpasses, inside protective PE pipes (including air blowing installation).

Range of application fiber optic transmission systems in public telecommunication networks, service networks and dedicated networks if connected to the public communication network, installation in grounds of all types but for grounds subject to cryogenic deformations, in cable ducts, bridges and overpasses.

Range of application fiber optic transmission systems in public telecommunication networks, service networks and dedicated networks if connected to the public communication network, installation in grounds 1 3 types and in rodent infested grounds as also in cable duct systems, pipes, over bridges and overpasses, for installation in asphalt and concrete pavement.

Range of application fiber optic transmission systems in public telecommunication networks, service networks and dedicated networks if connected to the public communication network, installation in grounds 1 3 types and in rodent infested grounds as also in cable duct systems, pipes, over bridges and overpasses, for installation in asphalt and concrete pavement.