Ferrous ore - Import export

Product Description   Commodity : Dysprosium Ferrum Alloy (DyFe Alloy) Dy 80%(-/+0.1%) RE Purity(TREM):99.9% Min.

Cut-To-Length Lines are core competence at GSW. They belong to the family of Cutting Lines and are designed to process diverse materials out of steel, non-ferrous metals or aluminum and precisely cut a coil into sections of equal length (which is where the name comes from). Starting with narrow slit strip and finishing somewhere beyond 2000mm width – our Cut-To-Length Lines always know how to shine in this process.

Lubrication of all kind of high stressed sliding areas, especially at low sliding speeds or oscillating movements, e.g. at threads, joints and bayonet nut connectors made of steel or non ferrous metals Assembling paste with corrosion protection for screws, bolts, spikes, bushings, flanges, spindles and fittings in the whole food stuff industry Separation of high temperature stressed screw joints, even after a long operation time Advantages and benefits Adheres good on metal surfaces, has a good water resistance and corrosion protection Good water resistance Prevents from tribo-corrosion Contains no metal pigments and is free of sulphurous materials Neutral to alloyed steels Formulation according to the FDA guideline 21CFR 178.3570 Registered by the NSF H1 MOSH/MOAH-free For optimal adhesion clean thread and sliding areas from dirt and other lubricants, first mechanically (e.g. with wire brush) and then with OKS 2610/OKS 2611 Universal Cleaner. Apply paste evenly in a sufficient amount

Lubrication of highly stressed sliding surfaces, especially at low slip speeds or with oscillating movements, for example with screwed, mating or bayonet connections made of high-alloy steel or non-ferrous metals Surface separation of temperature-stressed threaded connections, for example at combustion engines and turbines Corrosion protection at screws, pins, bolts, flanges, spindles and fits For stainless-steel connections Advantages and benefits Economic product solution for users who previously used a wide variety of pastes Resistant to hot and cold water and also to most acids and lyes Excellent corrosion protection Contains Moₓ-Active for increased performance Metal-free Also available as spray version OKS 2501

Metal detection coil INTUITY reliably detects enclosed contaminants in your product or bulk goods. INTUITY can be flexibly used in dry or wet areas and achieves best results with its multi-simultaneous frequency technology: It simultaneously checks with at least two frequencies if your packaged or unpackaged product contains steel, stainless steel, iron or non-ferrous metal. The metal detection coil helps you to enhance the quality of your products and to minimize the risk of possible recalls. INTUITY reliably checks if your packaged or unpackaged products or bulk goods include metal foreign objects. It is impressive in terms of its high accuracy: With its multi-simultaneous technology it checks at the same time with at least two frequencies within a range between 30 and 900 kHz

Lubrication of highly stressed sliding surfaces, especially at low slip speeds or with oscillating movements, for example with screwed, mating or bayonet connections made of high-alloy steel or non-ferrous metals Surface separation of temperature-stressed threaded connections, for example at combustion engines and turbines Corrosion protection at screws, pins, bolts, flanges, spindles and fits For stainless-steel connections Advantages and benefits Economic product solution for users who previously used a wide variety of pastes Resistant to hot and cold water and also to most acids and lyes Excellent corrosion protection Contains Moₓ-Active for increased performance Metal-free Also available as spray version OKS 2501 NSF H2 registered To achieve optimal adhesion remove soiling as well as other lubricants from the thread and sliding surfaces. Use a brush, spatula or similar to apply sufficient OKS 250

The STS-spiral roller brush range from Kullen-Koti contains all measurements from small to extra large and this unbeatable selection of diameters makes this brush a totally reliable tool for light brushing tasks. Due to the high fill density and precisely ground surface it achieves outstanding results. A flawless radial true runing is a requirement in most cases to achieve the desired brush effect. Therefore the brush cores are electrodynamically pre-balanced and re-balanced according to the required RPM after assembly of the spiral brushes. The balancing quality refers to quality grade G 2.5 as per ISO 1940. As core material we have available: mild steel, stainless steel, non-ferrous metal or plastic coated steel. Fixing of the spiral coils The coils are generally mounted onto the roller cores with pressure rings (PRB) in order to prevent the brush from roating on the core. Depending on the work and the rotation speed of the brush the coils can also be spot-welded or screwed...

A further variation of the "Throw-Away" system is type 230. It consists of continuously wound DBS-spiral brushes fitted to a thin walled steel, stainless steel or non-ferrous metal tubular shaft. The face width corresponds to the required total brush legth (BLG). The complete "Throw-Away" brushes can be simply assembled onto the customer's existing shaft. This method avoids the costly return of the complete shafts when the brushes have to be replaced. Core systems The complete "Throw-away" brushes type 230 can be supplied with adaptors to reduce the core inside diameter (KD) i. e. brushes with or without collar with suitable arbor holes (AL) for the different core systems WK1 and WK2. Our roller brushes are supplied with a fill surface perfectly trimmed and/or ground for concentricity. The brushes with adaptor or bushes are electro-dynamically balanced at the intended rotation speed according to standard G 2.5 as per ISO 1940

The types 220 & 221 are extremly flexible in their dimension and depending on the required performance these endless spiral brush coils are mounted on core systems made of mild steel, stainless steel or non ferrous metals.Compared with other brush designs we can reach the highest possible fill density with these types and they can be applied with a maximum speed of 55 m/sec without any problems. Supposition for it, is that the roller brush cores are electrodynamically balanced after the mounting of the core according to the required rotation speed and quality G 2.5 which comes up to ISO 1940. Our roller brushes are supplied with a fill surface perfectly trimmed and/or ground for concentricity. A perfectly seated attachment of the coils on the roller core is guaranteed by the pressure or mounting ring (PRB) system, also available with removable balancing weights (PRB-AW), which prevents the brush coil from rotating on the core. In some circumstances you also could choose a...

Tyrolit offers cup brushes for angle grinders and straight grinders that are user-friendly, safe and flexible. Whether steel, stainless steel or non-ferrous metals - our cup brushes clean materials efficiently and precisely. They remove rust, paint, varnish and scale, clean weld seams and prepare surfaces for further processing. Cup brushes for angle grinders Our cup brushes with the SHIELD system provide targeted protection against dust and wire breakage while you have an unrestricted view of your workpiece. Choosing the right type of wire is crucial. Our premium products offer flexibility, high quality and a long service life. Cup brushes for straight grinders Wire types are the key to perfect results. We offer brass-plated steel wire to prevent corrosion, stainless steel to prevent rust formation and hardened steel wire for additional service life.

Aluminium, Steel, Stainless Steel or Non Ferrous holders are available to suit any application. Most are available in either 45, 90 or 180 degrees and are also available as inserts to slide into the bottom of doors. The maximum length available is 3mtrs but we are able to cut, profile and champher your holder to any pattern provided by yourselves. Hard wood holders are also available.

Magnetic chip conveyors transfer wet or dry ferrous scrap without carryover. PRAB’s magnetic chip conveyors effectively transfer wet or dry ferrous chips, stamping slugs, turnings, parts or die scrap without carryover. This scrap conveyor system moves material with the aid of permanent ceramic magnets located under a stainless-steel slider bed. An oil reservoir in the base of the conveyor self-lubricates the chain for quiet performance and low maintenance of this scrap handling system.

EXCOR PERIGOL 100 is suitable for corrosion protection of ferrous metals, uncoated or partially galvanised steel, cast iron and other metals. PERIGOL 100 may be applied using immersion or spraying techniques. EXCOR PERIGOL 100 corrosion protective oil only requires a brief drip-off time and when applied can resist temperatures of up to approximately 50º Celsius. Solvent-free PERIGOL 100 forms an oily, non-wipeproof film on the metal surfaces which may be removed using aqueous alkaline media.

EXCOR PERIGOL DW is an anti-corrosion oil containing solvent which is chiefly used for the corrosion protection of ferrous metals, uncoated or partially galvanised steel, cast iron and other metals. It offers excellent water-repellent properties. In metal parts produced by processes involving water EXCOR PERIGOL DW removes the water, which dissolved corrosion-inducing salts may also contain, from the surface, creating a wipeproof film which protects against corrosion. This property can also be useful for dry parts, for instance during spraying. A wipeproof film provides more robust protection against mechanical and thermal stresses and also enhances the corrosion protection it provides.

Flexible in nature and application, supamag® magnetic tape is used across many industries for mounting material or items directly to steel or other ferrous surfaces. Where a ferrous surface is not present, supamag® magnetic tape can be used in conjunction with our adhesive-backed steel tape to provide a surface to which the magnetic tape will grip. Typical applications include magnetically mounting printed media or signage that can be changed quickly and easily. We can bond a range of adhesives to the non-magnetic face of the tape to suit the intended application. For more information please visit the adhesives page. All of our supamag® magnetic tape is UV coated on the magnetic face as standard, preventing the tape from marking the media or product to which it is applied as well as the individual handling the tape. This is especially useful to the print industry where it reduces the need to reprint due to printed media becoming marked and unusable.

Magnets for recycling separate ferrous and non ferrous metals from waste streams or bulk streams. For the elimination of impurities from raw materials or recovery of valuable metals from product streams. An overband magnet effectively and quickly separates high volumes of iron or steel and hangs above a flat or trough-shaped conveyor belt. This type of magnet is self-cleaning and continuously draws Ferro parts from a material flow. he iron removal efficiency of overband magnets ranges from 70 to 90%. This depends on magnet design, product flow and placement. We also manufacture Eddy current separators which remove non-ferrous metal particles, such as copper and aluminium, in a continuous process. For the recovery, recycling or removal of metals.

InFocus: Precise, reliable und reproducible InFocus is a high-performing TIG technology. Its precision and reliability make the InFocus welding process particularly suitable for automated applications in combination with linear axles, robots and other guiding systems. Nearly all steels, non-ferrous metals or galvanized sheets can be welded in one layer with or without filler material; e.g. CrNi-steels with a material thickness of up to 10 mm. For welding root layers of thicker sheets, the InFocus welding process offers an alternative. By using the TIG keyhole welding process, the web can be made bigger. This reduces the seam cross section and thus the number of the required layers during the subsequent submerged-arc welding. It is also not necessary to gouge the root when using the InFocus welding process for the root layer.

The testing machine series inspekt table was developed for standard-compliant materials and component testing in the medium load range, with particular attention paid to reliability and flexibility. It is ideally suited for materials testing of plastics or non-ferrous metals as well as for testing smaller components, for example from instrument engineering. In combination with our user-friendly testing software LabMaster, standard-based and customer-specific tests can be easily implemented. Testing machine, testing software and our extensive range of accessories such as specimen grips and testing tools, extensometers or temperature control devices are optimally matched to each other and offer the ideal testing system for a wide variety of testing applications (tensile tests, compression tests, bending tests, peel tests,...). Inspekt table is available in six different load levels from 5 kN to 250 kN.

We manufacture punched parts made of aluminum, stainless steel or plastic according to your specifications using high-quality punching tools on our modern punching machines. We can mill or laser smaller quantities or sample parts made of plastic or non-ferrous metals on our CNC machining center or our CO2 laser systems and label them as required.

SINC Razzoor Series cable granulator is advanced-level cable and electronic waste recycling machine, with the compact design the machine becomes mobile, it can be easy moved to other locations and works like plug and play machine. The machine is equipped with all needed to work independent, just supply the electricity and you can start to recycle your cable or electro waste, for to separate the coper, metals, lead or other ferrous or nonferrous metals from the plastics.

Mini Razzor 150 cable granulator is advanced-level cable and electronic waste recycling machine. With the compact design the machine becomes mobile, it can be easy moved to other locations and works like plug and play machine. The machine is equipped with all needed to work independent. Just supply the electricity and you can start to recycle your cable or electro waste for to separate the coper, metals, lead or other ferrous or nonferrous metals from the plastics.