Expansion tanks - Import export

LIPP® Tank Refurbishing Quantities change and existing tanks become too small – these are also problems that frequently arise. In such cases, the mobile machine technology from Lipp using the LIPP® DoubleSeam System or the LIPP® welding technique offers a solution that is as simple as it is costeffective, while being extraordinarily stable. Tanks can be installed on site in any size required and can be placed in an existing steel or reinforced concrete basin using a mobile crane. The existing tank volume is utilised, eliminating the need for expensive demolition work. There is also a range of materials to choose from for the tank itself so that it can be optimally matched to the intended application. VERINOX®, the combination material developed by LIPP® consisting of galvanised steel (for the outside of steel containers) and stainless steel (for the inside of containers), is characterised in particular by the excellent costbenefit ratio that it offers.

For several fields of energy technology we produce heat storage and buffer tanks according to individual costumers´demands. We offer optimized statically design calculation for your requirements, from small installations to vessels with capacity of 600m³, optional with insulation in our factory or on site.

SYSTEM FOR THE COST EFFECTIVE REFURBISHING OR VOLUME EXPANSION OF CONTAINERS OR TANKS Changing conditions, material wear, a change to the filling medium – these are just a few of the factors that lead to the replacement of containers used in industry or at municipal sewage treatment plants. Quantities change and existing containers become too small – these are also problems that frequently arise. In such cases, the mobile machine technology from Lipp using the LIPP Double Seam System or the LIPP welding technique offers a solution that is as simple as it is cost effective, while being extraordinarily stable. Containers can be installed on site in any size required and can be placed in an existing steel or reinforced concrete basin using a mobile crane. The existing container volume is utilised, eliminating the need for expensive demolition work. Utilisation of the existing container volume High stability, leak tightness and safety Continuous adaptation to existing container

ON SITE PRODUCTION FLEXIBILITY WITH CONTINUOUSLY VARIABLE DIMENSIONS Special circumstances and requirements often call for containers which cannot be produced using standard solutions. This is where special tanks and silos which can be adjusted to suit prevailing conditions and provide individual solutions are required. The LIPP System offers a variety of possible solutions to a wide range of problems in the form of welded or folded designs. Steplessly adjustable diameters and heights enable tank dimensions to be individually adapted to the prevailing conditions. In addition, on site installation only requires a minimal amount of space, for example enabling containers to be constructed in buildings or other situations where there is limited space available. Tank in tank solutions can also be realised using the LIPP System. Tank in tank solutions Container expansion, e.g. of concrete containers Installation inside buildings Mounting on platforms Mounting on various substructures

We manufacture steel or aluminium tanks and vats for wide range of industry. We provide tanks and vats according to customer drawings. Our production and welding services are in accordance with ISO 3834-2 and other certificates we own: EN 1090, EN 15085, DNV-OS-C401, 9001:2015 and ISO 14001:2015. WE can produce wide range tanks and vats according to yours drawings. At clients’ request Base Group can produce: Water Heater Tanks, Water Storage Tanks, Heat Exchangers Tanks, Stainless Steel Process Tanks, Expansion Tanks, Heating/Cooling Package Units, Food Industry Tanks, Chemical Industry Tanks.

This cooling unit with heat pump function offers exceptionally high energy efficiency values ​​for both cooling and heating. The device have built-in hydronic module with pump and expansion tank inside. The inverter technology adjusts the compressor speed to the circumstances and enables stable temperatures. Cooling Capacity: • 7°C Coolant – supply flow temperature • 12°C Coolant – return flow temperature • 35°C Outside air temperature of the cooling unit An antifrogen should be used if the flow temperature is below + 10 ° C.

Use these Advance Thermal Stores for the provision of fast, safe hot water provision throughout the house. The indirect pattern (TSi) Twin Coil with the integrated feed and expansion tank can be sited anywhere in the property. The lower coil can be connected to a sealed system boiler in a Y plan, thus only one pump is needed. The store remains vented, with the contents of the store used as a medium for heat transfer only. These low maintenance pre plumbed units provide flow rates up to 30 litres per minute and if linked to the appropriate gas, oil, solid fuel, biomass or other appliance (except Heat Pumps) are suitable for average to larger properties.

Use these Advance Thermal Stores for the provision of fast, safe hot water provision throughout the house. The indirect pattern cylinder (TSiC) without the integrated feed and expansion tank has to be fed with a remote F and E tank but can be sited anywhere in the property. They have two coils, the lower one for heat input from a boiler, the higher one for mains fed hot water services. They can be used with sealed system boilers and heating circuits on Y plan systems. These low maintenance pre plumbed units provide flow rates up to 30 litres per minute and if linked to the appropriate gas, oil, or LPG boiler are suitable for average to larger properties. The bottom coil must be pumped. The units look smart too, with a wipe-clean white appliance finish, and the insulation is 60mm foam injected for maximum efficiencies. Stainless steel construction offers a lightweight long life product. The stores are guaranteed for ten years, the parts for two.

Use these Advance Thermal Stores for the provision of fast, safe hot water provision throughout the house. They work on the thermal store principle of storing central heating water and providing mains fed hot water via a powerful coil for power showering and quick bath filling. The coil is not pumped. The thermal store acts as a buffer for fast radiator heat up and boiler efficiency. The direct pattern cylinder (TSDC) without the integrated feed and expansion tank has to be fed with a remote F and E tank sited above the highest point of the radiator circuit. You need two pumps - one for the boiler to keep the store hot - controlled by the thermostat on the store, and one for the heating circuit - controlled by the room thermostat and heating programmer. These low maintenance pre plumbed units provide flow rates up to 30 litres per minute and if linked to the appropriate gas, oil, solid fuel or biomass(except Heat Pumps) are suitable for average to larger properties

Dehydrating breathers are being used for liquid immersed transformers in order to protect the insulating liquid and prevent the harmful moisture absorption from ambient air, which occurs when the load on the transformer fluctuates.The dehydrating breather removes practically all moisture from the air that flows through it into the conservator when the transformer is cooling down. This largely prevents any reduction of the dielectric strength and the formation of condensation in the expansion tank. Thus, the dehydrating breathers increases the operational safety of transformers.

Nissa series of pellet boilers have been designed to be installed in narrow spaces.Thanks to this feature,It can be installed places such as narrow boiler rooms,glass balconies and pantries. Nissa is ready to function since it has closed expansion tank,circulation pump,safety valve,air release valve and hydraulic system included. It will provide a great convenience for fuel feeding via the 53 lt of fuel hopper it has. It has been designed to burn maximum 25 mm diameter of local or imported coal types.The capacity range covers 25 Kw and 80 Kw. It provides a comfortable use thanks to its features of automatic feeding,manual ignition and manual cleaning systems. Thanks to the features of high efficient boiler body,cast iron burn pot and digital control board it provides a maximum heating and minimum fuel consumption. Available as 30 Kw - Modulates between 6 Kw to 30 Kw

EXPANDED PERLITE (2 Plants ) Filter Aid Perlite Cryogenic Perlite Construction Perlite Agricultural Perlite Textile Perlite PERLITE ORE for various industries (Production capacity 300.000 mt annually ) 0,074-0,30 MM 0,15-0,60 MM 0,60-1,20 MM 1,20-2,40 MM PROJECTS COMPLETE PERLITE EXPANSION PLANTS INSULATION PROJECTS (TANKS Natural Gas, Oxygen, Nitrogen & COLD BOXES )