Environment heating - Import export

Complete ready to install heating mats, with or without spare heating cable, consisting of heating cable and cold lead, length to customer specification, up to 180 m possible. Heating mats from Klöpper Therm work against the penetration of cold in to the ground and prevent upheaval of the ground and destruction of the foundations. Cold stores and cooling chambers give off cold to their environments. In the area of partly or fully sunk in the ground supports, foundations and floors the underlying soil receives the cold. If the natural heat flow from the environment and the earth is insufficient, the moisture in the ground freezes, expands and the ground is lifted. Depending on the nature of the ground, this may cause substantial damage to buildings. Frost heave protection in cold stores and cooling chambers is, therefore, an essential and a reliable preventative measure against frost damage and damp.

Schultze RiRo heaters are your solution for industrial and commercial heating appliances: dust- and watertight, corrosion-resistant, flexible and uncomplicated to install. Suitable for damp locations and rough industry environment, for reliable and efficient heating – often unnoticed, but indispensable. The construction of RiRo-nta is identical with RiRo-nt except for the fact that heating power can be steplessly regulated by our built-in thermostat. It keeps the temperature of your choice constant between +5°C and + 30°C or just protects your room from frost. The red signalling light shows when power is on.

Schultze RiRo heaters are your solution for industrial and commercial heating appliances: dust- and watertight, corrosion-resistant, flexible and uncomplicated to install. Suitable for damp locations and rough industry environment, for reliable and efficient heating – often unnoticed, but indispensable. The heater RiRo-fa is identical with type RiRo-f, but additionally heat transfer can be controlled steplessly by our built-in thermostat. According to your needs the heater will keep the room frostprotected or the temperature will be kept constant at your choice between + 5°C and + 30°C. Applicable for rooms with risk of fire. Max. 115°C on top of the fins.

Schultze RiRo heaters are your solution for industrial and commercial heating appliances: dust- and watertight, corrosion-resistant, flexible and uncomplicated to install. Suitable for damp locations and rough industry environment, for reliable and efficient heating – often unnoticed, but indispensable. RiRo-F for rooms with fire risk: the economic choice for rooms where a “full range” heating is not needed, e.g. to protect your rooms or your valuable facilities against frost. To keep below the reduced surface temperature of 115°C we chose appropriate power layout. Max. 115°C on top of the fins.

Schultze RiRo heaters are your solution for industrial and commercial heating appliances: dust- and watertight, corrosion-resistant, flexible and uncomplicated to install. Suitable for damp locations and rough industry environment, for reliable and efficient heating – often unnoticed, but indispensable. Universal features: for power types 1000 W to 3000 W the connection can be fitted with either 230 V or 400 V 3(N) ~. On request: for special applications all types are available in special voltages or different high-grade steel qualities, e.g. for food- or off-shore-industry.

Heat recovery with the help of heat exchangers In industry, waste heat occurs at many points in the production process, which is often released into the environment without being used. In many cases, energy is even used to cool the waste heat flows from production so that they can be released into the environment. Heat exchangers (also called heat exchangers) are used for heat recovery so that the waste heat generated in the production process can be used again in the company. Gaseous or liquid media Waste heat can be in the form of gaseous media (e.g. warm exhaust air, steam, exhaust gases, etc.) or in the form of liquid media (e.g. hot water or other liquids). With the help of heat exchangers, the waste heat can be recovered from both gaseous and liquid media and then made available to the production process at a suitable point as energy in gaseous or liquid media. This process is known as energy recovery or also as heat recovery.

Schultze RiRo heaters are your solution for industrial and commercial heating appliances: dust- and watertight, corrosion-resistant, flexible and uncomplicated to install. Suitable for damp locations and rough industry environment, for reliable and efficient heating – often unnoticed, but indispensable. With these heaters the excess temperature touching the top of the fins does not exceed 67K (difference of 67°C to room temperature).

Schultze RiRo heaters are your solution for industrial and commercial heating appliances: dust- and watertight, corrosion-resistant, flexible and uncomplicated to install. Suitable for damp locations and rough industry environment, for reliable and efficient heating – often unnoticed, but indispensable. With the built-in three step switch heating power can be adjusted according to actual requirements. This helps saving energy! Step I 1/3 of heating power Step II 2/3 of heating power Step III 3/3 of heating power

Schultze RiRo heaters are your solution for industrial and commercial heating appliances: dust- and watertight, corrosion-resistant, flexible and uncomplicated to install. Suitable for damp locations and rough industry environment, for reliable and efficient heating – often unnoticed, but indispensable. The heating power is steplessly adjustable and the thermostat keeps your chosen temperature constant. Choose either frost protection or your temperature between + 5°C and + 30°C. The red signalling light shows when power is on.

The MD200, manufactured by Trotech®, is a magnetometer suited for covered ferromagnetic metals locator such as valve caps and rods, hydrants, metallic manhole and tank covers, and the like. It is designed for environments like in the blazing heat, bitter cold, under water or in the snow to supply a location results that is accurate. It comes with a benefit of a covered ferromagnetic metal with a speedy detection and a reliability that prevents the detection of all non-magnetic metal objects due to its high sensitivity, and with an auto-manual adjustment that can function for 24 hours. Furthermore, a backlit display can be read easily along with a rotation function. It is designed to minimize discomfort and lightweight of only 830 g.

Our industrial 36 kW electric heater is capable of heating very large spaces. It provides a very quiet and convenient solution and can be placed indoors or outdoors. The heater can be easily connected to an existing ventilation system. Portable and quiet unit. The unit has three power settings and two fan speeds. Integrated air distributor provides multi-directional airflow. Centrifugal fans allow high pressure outputs and better airflow. Includes an internal thermostatic control. Can be easily connected to an existing ventilation system. Fitted with European G4 filters which will remove visible dust, wood and metal particles from the air creating a cleaner working environment. Capable of heating very large spaces, indoors or outdoors. One unit maintains the same area as about three traditional heaters. Design delivers reductions in energy usage, running costs and carbon emissions. Aids the prospect of meeting long term government emission reduction targets.

Flanged wheels are mainly used on rails to make sure that transport units stay on track. They are made up of a bearing and a wheel centre with a flange. They are used in everything from machine and systems engineering through to pulleys. These environments involve special conditions like heat, contact with oil or chips and electricity. Blickle has five different series of flanged wheels in its product range to meet various requirements. The SPKGSPO, SPK and SPKVS series have a single-sided flange. The DSPK and DSPKGSPO series have a double flange. The flanged wheels are also available in a variety of materials. Compressed cast nylon, steel and grey cast iron series are available. The flanged wheels use either a plain bore or ball bearings. Other bearing types are also available upon request.

Tubes wound into a spiral shape Coaxial heat exchangers consist of two or more pipe coils, which are routed into one another and wound up in a spiral shape. The primary medium runs in countercurrent to the secondary medium. Fast temperature exchange This countercurrent design achieves a very rapid temperature transition with high efficiency between the liquids. Due to the spiral shape, the rapid temperature exchange between the liquids is achieved in a very small space. No cleaning or maintenance required Another advantage is the encapsulation of both liquids from environmental influences. There is practically no cleaning or maintenance effort due to pollution from the environment. The coaxial heat exchanger also does not require any seals that require maintenance. Condenser or evaporator function Coaxial heat exchangers can be used for both condenser and evaporator functions.

We manufacture a complete range of conveyor cleaning brushes, motors and mountings to clean conveyor systems and conveyor belts. They can be manufactured to suit different environments such as heat resistance and food grade for ie. ovens, food production, bakery and seafood as well as aggressive and durable for ie. building materials, engineering, warehousing etc. Conveyor cleaning brushes are either close-wound brushes or an open faced spiral (auger style or archimedes screw). The amount of aggression required to clean along with the type of conveyor system, determines the type and style of brush. Brushes may be replaceable or refilled dependent on the diameter and weight of the brush and the cost of logistics for shipping and carriage.

CTi’s On-board Steam cooking solution. Speedy. Delicious. Healthy. The CTi Offshore Steam Cooker is a fully automatic PLC-controlled batch cooker for use on factory trawlers. Time of cooking and cooling as well as temperature can be individually adjusted and programmed for multi-set point cooking. Constructed from duplex steel to withstand the harsh environment of salt and heat. A minimum level of maintenance is required.

Fire Resistant Hydraulic Fluid 620 represents a cutting-edge solution meticulously engineered to prioritize safety when operating hydraulic systems in proximity to open flames or high-temperature environments. The presence of heat, molten metal, or flames in close proximity to hydraulic equipment poses inherent risks. Even the tiniest fissure in a hydraulic line or fitting has the potential to disperse a combustible mist of oil towards the heat source. Such a scenario can lead to devastating consequences, including severe injuries, property damage, the destruction of machinery and infrastructure, and significant production delays, all resulting from ensuing fires. High Degree of Fire Resistance Non-Explosive Corrosion Inhibited Good Lubricity High Viscosity Index – ISO 46 Viscosity Stable in Service Long Pump Life Long Term Economy Synthetic Rubber Packings not Affected HFC Classification

HPM® X-750 is a precipitation –hardenable nickelchromium alloy which is well suited for a wide range of corrosive and oxidizing environments where strength must be maintained to elevated temperatures. The alloy composition provides a product which performs well at elevated temperatures up to 1300° Farenheit. The strength can be increased by heat treatment. The alloy is readily formable in the annealed temper and can be joined by the standard welding and brazing processes. Available Sizes: HPM® X-750 is available from Hamilton Precision Metals as strip product in thicknesses from 0.001” to 0.025” (0.0254 mm to 0.635 mm) in widths up to 12.0” (304.8 mm). The material conforms to AMS 5542, AMS 5598 and UNS N07750.

The Star 66 free-standing sealer is designed specifically for sealing bags where the product is best standing upright. Typically, this lends itself to the bagging of bulk product such as aggregates, prepared foods and chemicals. The Star 66 is available in a range of formats to suit the product, working environment and bag type. The rugged, powder coated mild steel body is built to withstand the rigours of hostile working environments, such as builders' yards or coal merchants. The foot switch initiated solenoid jaw operation allows the operator to be preparing the next bag whilst one is being sealed. An IP65 stainless steel machine is available for food environments. Constant heat jaws for heavy weight foil and multi-wall bags are also available. For applications where seal quality is paramount, such as hygroscopic compounds, the Star MkVI C or ARTICS controller should be specified.

Dafinor offers high-quality pellets, made with 100% content from natural wood sourced from certified forests. The physical-chemical characteristics of Eco Pellet pellets produced by Dafinor are: Moisture 4.6% Ash residue 0.6% Yield 95.8% Density 0.66 kg/m3 Net calorific value of the pellet 4488-4771 kcal/kg The use of pellets as a heating material has many advantages, both for environmental preservation and for users. Less waste production; Safe and clean environment; Most economical way of heating; High-energy combustion; Composed of softwood; High-efficiency combustion.

Wide range capacity liquid cooled condensing units, designed for commercial and industrial applications with the cooling capacity from 10kW to 40kW. These units work on a principle of the heat rejection loop, where condenser heat is dissipated to the environment via water. Rejected heat can be used for additional needs in the same building, which gives these facilities additional economic benefits. These units provide an economical, compact alternative to traditional air-cooled condensing units. Built on an assembled frame with covers, this condensing unit can be designed in a variety of ways, depending on intended use. Collected with shell and tube or plate heat exchanger, 1 to 4 reciprocating or scroll compressors and a liquid receiver as well as refrigerant filters and a sight glass. Safety valve and pressure switches are added to increase the security of the unit. An additional 50 mm rock wool insulation can be supplemented for a super silent unit operation.

Wide range capacity liquid cooled condensing units, designed for commercial and industrial applications with the cooling capacity from 10 kW to 40kW. These units work on a principle of the heat rejection loop, where condenser heat is dissipated to the environment via water. Rejected heat can be used for additional needs in the same building, which gives these facilities additional economic benefits. These units provide an economical, compact alternative to traditional air-cooled condensing units. Built on an open welded frame with standard profile, this condensing unit is also available in a double-deck construction for higher capacity. Assembled with shell and tube or plate heat exchanger, 1 to 4 scroll or reciprocating compressors and a liquid receiver as well as refrigerant filters and a sight glass. Safety valve and pressure switches are added to increase the security of the unit.

Wide range capacity liquid cooled condensing units, designed for commercial and industrial applications with the cooling capacity from10 kW to 40 kW. These units work on a principle of the heat rejection loop, where condenser heat is dissipated to the environment via water. Rejected heat can be used for additional needs in the same building, which gives these facilities additional economic benefits. These units provide an economical, compact alternative to traditional air-cooled condensing units. Built on an open welded frame with bent profile and powder coating, these condensing units carry a plate heat exchanger. Can be assembled with 1 to 4 reciprocating or scroll compressors with crankcase heater, a liquid receiver, refrigerant filters and a sight glass. Safety valve and pressure switches are added to increase the security of the unit.

Formed shape products are produced either by moulding or by vacuum-forming fibres to fill a wide range of requirements not met by other product forms. These pre-formed shapes are manufactured by blending fibres, with specially selected inorganic and organic binders to give insulating shapes with exceptional characteristics. The vacuum forming manufacturing method permits considerable freedom to vary shape, thickness, density and hardness. Our shapes often provide the most economical answer to producing large quantities of parts in simple or complex configurations for a wide range of high temperature applications. We have a vast range of products already available and work closely with our customers to develop the right product for the application. New tooling can be developed within short lead-times. Shapes used in 1100 to 1800 C of heat environment.

With heat recovery systems in industrial environments, the heat contained in the exhaust air is efficiently used to heat air or water. A very efficient use of this energy is the preheating of dryer supply air. The heat can be used continuously here. This warm exhaust air is also suitable for heating buildings. Depending on the local conditions, both airtoair heat exchangers and airtowater heat exchangers can be used for this purpose. The heated air, in turn, is fed into production and factory halls or other areas of the building. This type of supply air heating is particularly costefficient. Such recovery systems also have a positive effect in terms of environmental compatibility. Waste heat from industry that is harmful to the climate is no longer released into the environment but remains in the cycle of the production process or building heating. The systems are also suitable for cooling rooms when outside temperatures are hot, for example.

Boron Carbide (BC) is characterized by extra-hardness: it is the third substance after diamond and cubic boron nitride material, with high wear-resisting property, chemical resistance in aggressive environments, heat resistance, neutron absorption large cross-section, high electric resistance and semiconductor properties. The grinding materials are used for grinding and polishing by loose abrasive grains and in the form of pastes. BC is widely used in the nuclear industry for the control rods manufacturing. BC is used in the process of armor plates and bullet-proof body armor manufacturing.

We’re famous for our high quality, high specification, versatile range of PPE protective clothing and welding clothing that stands up to the most demanding environments. Our protective clothing suits a variety of industrial environments including welding, foundries or any environment where fire retardancy or heat resistance is required. Our quality ethic is evident in our protective clothing – use of the best raw materials and highly skilled processes means that you get quality garments that you can trust. Our range includes: Flame retardant leather Heat reflective (aluminised) Flame retardant Proban We also have our new Code Black range of ultimate welding PPE attire. Our Code Black range is of supreme quality, practical and comfortable.

In applications with corrosive environments or when enhanced heat conductivity is required, our copper-brass round tubes are available in a variety of sizes and gauges, including an inventory of common profiles in long lengths for immediate delivery. Or they can be customized for your application. • A wide array of copper and brass alloys available, from 65/35 to 85/15 • High-strength materials available for high-pressure applications • Internally scarfed round tube • Straight lengths or coil(s)

Avantair is unique in the marketplace as it uses heat pipe technology. This advanced air-to-air cooler is particularly recommended for challenging environments like offshore and desert locations.