Results for
HERBERHOLZ GMBH
Germany
Applications: Combustion Engines and Test Bench Technology / Industrial Combustion Technology HRD / HRA high-temperature version One-piece body, centric disc Operating temperatures up to 1050°C, depending on material selection Wafer type body for flanges according to DIN EN 1092-1 or ASME B16.5 / ASME B16.47 Face-to-face length acc. to DIN EN 558-1 R20, from DN400 acc. to manufacturer’s standard Mounting flange for actuators according to DIN EN ISO 5211 Inspection according to DIN EN 12266 SIL certification according IEC 61508 and IEC 61511
Request for a quoteKELLER PRESSURE
Switzerland
The series 13 pressure transducers have internal water cooling and are suitable for use in media temperatures of up to 350 °C. Typical applications include superheated steam circuits, engine test benches or chemical process monitoring.
Request for a quoteKELLER PRESSURE
Switzerland
The miniature pressure transducer M5 takes its name from the fine M5 thread at the sensor head that makes it possible to take measurements in places which are difficult to access and in narrow pipelines. Together with its ability to measure media at temperatures of up to 180 °C in a dynamic range from 0 to 50 kHz, this makes it ideally suited to measurements on engine test benches.
Request for a quoteREICH-KUPPLUNGEN ; DIPL.-ING. HERWARTH REICH GMBH
Germany
Test bench couplings are applied in miscellaneous test benches. By reason of manifold, specific requirements TOK system is designed according to the modular design concept, to be applicable on almost every engine test bench. For specific requirements, e.g. special-test benches, the standard parts can be combined with specific-designed parts to derive solutions corresponding to individual conditions. Advantages of the TOK-ZW coupling system: Lowest possible torsional stiffness utilizing two flexible elements Simple adjustment of the torsional stiffness by changing of elements Compensation of axial-, radial- and angular misalignment Self-centering, backlash-free and maintenance-free Flanges adapted to DIN or SPICER bolt patterns, respectively on demand Variable installation lengths utilizing telescopic spacer shafts Ideal for highest speed Lowest possible weight by using high-tensile aluminium and CFRP We are glad to see that you are interested in our product line and are happy...
Request for a quotePOPPE + POTTHOFF MASCHINENBAU GMBH
Germany
The system is a self-sufficient unit and is made of a solid welded frame, contains media preparation, a hydraulic unit, and electrical engineering. The pressure test bench has a secure test chamber for burst pressure and hydrostatic pressure tests and, optionally, a climatic chamber for pressure tests with environmental simulation. Depending on the option selected, pressure change tests up to 2,000 bar and 10 Hz can be generated. With the test circuit for hydrostatic and burst pressure tests, pressure ramps up to 3,000 bar can be generated. It is operated on a support arm PC. For pressure tests according to EG79 / EU406 – Section 4.2 Pressure booster for additional supply Displacement volume max. 15cm³ Frequency up to 10Hz Pressure Load Changes as sine & trapezoidal curve (depending on the expansion volume) Impulse intensifier for small volumes up to 2,000bar Safety test chamber with automatic door Media treatment with dirt and clean tank
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
COSTRUZIONI METALMECCANICHE VALENTE
Italy
Our on-site engineering department at Nole designs industrial soundproofing systemswhich are then manufactured and installed by our specialized staff, according to the needs of the customer who is dealing with the problem of noise pollution. We design and manufacture: Sound-proof booths and sound-absorbing cabins for machinery and production lines. Sound isolation booths for line operators Soundproofed cabins for engine test benches Soundproofed walls Fixed and mobile acoustic screens for industry Acoustic panels and barriers. Air treatment within soundproof booths or cabins For a number of years now, our company has, in addition, been offering the market its experience in the manufacture of protections and repair mechanisms for industrial machines, equipment and production lines.
Request for a quoteWEINLICH GMBH & CO. KG
Germany
For Example: Container 40 ft for outdoor installation for performance testing at combustion engines with all kinds of dynamometers. Depending on the kind of the installed dynamometer, external supply beyond electricity (e.g. for cooling water) will be required. Thanks to our mobile engine supports, there is no need of an overhead gantry crane or any other lifting device.
Request for a quoteWEINLICH GMBH & CO. KG
Germany
Our engine test beds are modular systems existing of control unit, dynamometer and mobile engine supports. Applications: Determination of engine performance, runnning engines under a defined load in order to determine other measuring values. Fields of application: Science, development, quality control by manufacturers and control authorities, education (especially air cooled dynamometers). New: Container for outdoor installation for performance testing at combustion engines with all kinds of dynamometers. Our range of engine test beds: - with eddy-current brakes (air-cooled or water-cooled) - low-inertia hydrostatic braking dynamometers - braking dynamometers with water brake - regenerative 4-Q-dynamometers - electric generators, loaded by resistors
Request for a quoteWI.TEC -SENSORIK GMBH
Germany
For the detection of NO and H2S an EDL (electrodeless gas discharge lamp) is used. A combination of both technologies (UVRAS & UVLEDs) allows simultaneous gas analysis of NO, NO2 and SO2 in the lower ppm range, which is particularly important in flue gas analysis (CEM)2. In the EDL, N2 and O2 are converted to NO and produce selective UV radiation. With this radiation a cross sensitivity free NO measurement is made possible. This method is called UV resonance spectroscopy (UVRAS). Applications Exhaust gas monitoring (CEM)2 Laboratory area Biogas research Industrial gas analysis Engine test benches Portable gas analysis (PEMS)3 Features & Benefits Simultaneous NOx and SO2 analysis Temperature controlled up to 55°C Fast response time < 3 seconds Durable EDL (> 16000h) Flow-independent measurement 0-2L/min No influence of gas humidity No NOx converter required High accuracy Low power consumption Compact size
Request for a quoteMERECS ENGINEERING GMBH
Germany
We develop and build test stands for pumps and can refer to several references in this field. In addition, we build press-off facilities and design them individually, including suitable risk assessment. Our process visualisation is suitable for customer presentations of the running pumps directly at the pump test stand. In addition, Merecs Engineering provides the connection to the IT infrastructure of our customers (ERP systems or databases). - Planning, calculations and construction - Coordination of suppliers - LabVIEW software development - NI-Real-Time & FPGA for high-speed evaluation of speed and acceleration measurement values - Vibration analysis via FFT (updated live) - LabVIEW, NI-cRIO and Siemens S7-1500 PLC in combination possible - Database connection - On-site assembly and IB
Request for a quoteMERECS ENGINEERING GMBH
Germany
We are experienced in test system development for leakage testing, life time testing and end-of-line test stands in the field of gas & hydrogen technology. We also have a network of suppliers and partners who provide key components for leakage measurement, piping, sealing and instrumentation. As a general contractor and integrator, Merecs Engineering can individually design, assemble and commission the test system at our customers' sites.
Request for a quoteMERECS ENGINEERING GMBH
Germany
We design and manufacture individual test systems for the pressure testing of valves and pumps. Merecs Engineering has a competent network of partners for this purpose. Within this framework, we carry out the risk assessment, design, manufacturing, installation and commissioning. In addition, we connect the systems to the individual IT infrastructures (databases, ERP systems, MS PowerBI) of our customers.
Request for a quoteMERECS ENGINEERING GMBH
Germany
EOL test stand for e-charging columns and their power electronics for the simulation of different electrical loads and mains fluctuations. The test stand has automatic contacting and achieves high test throughputs in end-of-line operation. Different variants of the power electronics of electric charging columns can be tested. On the software side, Merecs Engineering relies on NI-LabVIEW and NI-TestStand.
Request for a quoteWEINLICH GMBH & CO. KG
Germany
The MP Computer is a comfortable, comprehensive and easy-to-handle evaluation, display and control unit for different types of engine test beds. Its clear and ergonomic arrangement fascilitates the work with the test bed. Desired loads can be adjusted quickly and easily. Specialists are not required. Many optional additional functions increase enlarge the comfort of the MP Computer. Maintaining permanent accuracy of torque measurement is facilitated by a semi-automatic calibration routine. Existing engine/motor test beds can be modernized by an MP Computer. Examples of optional additional functions: - Automatic gravimetric determination of the specific fuel consumption. - Several possibilities of output and documentation of measured values. - Acquisition of non-electric and electric measuring values on combustion engines, electric machines, etc. - Special functions required by certain measuring tasks.
Request for a quoteResults for
Engine test benches - Import exportNumber of results
15 ProductsCountries
Company type
Category