Electronic load - Import export

EOL test stand for e-charging columns and their power electronics for the simulation of different electrical loads and mains fluctuations. The test stand has automatic contacting and achieves high test throughputs in end-of-line operation. Different variants of the power electronics of electric charging columns can be tested. On the software side, Merecs Engineering relies on NI-LabVIEW and NI-TestStand.

PALLET TRUCK SCALE SERIES TPWN09 "NETWORK" Pallet trucks with integrated electronic weighing, handy and easy to use. Equipped with 4 load cells shear-beam, which could achieve greater precision weighing, and multifunction weight indicator, with large backlit display to permit the optimal reading weight even in low light conditions. Series not homologated. Available in two models: TPWN09: weighing transpallet with forks width mm. 550 - division 0,2 Kg - capacity 2000 Kg. TPWN09L: weighing transpallet with forks width mm. 680 - division 1 Kg - capacity 2000 Kg. MAIN FUNCTIONS High resolution x10 display - net / gross or lb / kg conversion - weight totalization - formulation - percentage weighing - piece counter - +/- control KEYBOARD FUNCTIONS Zeroing - semi automatic tare - manual tare Conversion lb / kg - Free conversion factor (meter counter, liter counter, ..) - weight totalization - piece counter - hold

CJS 25 HI is an electronic dosing device with load cells for semi-automatic filling of bags with max weight 25 kg. Hopper capacity 300 l, bags weight 2-25 kg. The machine is suitable for the automatic dosage of granular products with a good flowability. The dispenser is mainly formed by a welded and painted tubular steel, stainless steel, loading hopper with pneumatic closing, fast discharge channel, slow discharge channel with vibrator to achieve the exact weight, weighing hopper installed on load cells, pneumatic device for locking the empty bag, PLC operator interface and user-friendly keyboard. The dispenser can be combined with a motorized conveyor for automatic loading of the product and to a free or motorized conveyor for unloading the full bag, it can also be combinated with an automatic packaging machine. All parts in contact with the product are made of stainless steel. Ideal for packaging of pellets, granulated foods, dried pasta (short), cereals, coffee, nuts, sugar, etc.

Place the pallet on the platform, attach the film to the base, select the wrapping program and press the start button.The machine automatically winding and stops. Cut the film manually. On requrest we can produce wrapping machines with: Rotary table diameter mm. 1800 - 2000 Electronic balance with load cells Load/ Unload rollers STRETCH FILM FOR WRAPPING MACHINES: The film normally used on winding machines is 23 my standard in rolls of approximately 16 kg. With 1 roll of film you are able to wrap an average of 60 pallets. The film is also available in white 30 my, suitable to protect the contents of the pallets from sunlight. The white film is opaque and can be used to hide valuable goods during transport. The type of films supplied by us is of premium quality and is suitable to be used on our machines. We recommend using only top quality film in that it significantly reduces packaging waste and failures due to the use of an unsuitable product

ETR Galvanic Isolation Transformers provide isolation between network installations and sensitive electronic loads. Insulated aluminum or copper windings are wound on a high efficiency sheet core. ETR transformers are vacuum-impregnated varnished and high-temperature dried to ensure quiet and moisture-proof operation. It is safe and long lasting.

MAGTROL offers a wide range of Load-Force-Weight Transducers with optional integrated electronics or Load Monitoring Units (LMU) with B.I.T.E. functions creating an ideal measurement system which continuously checks for overloads and short circuits. Idealy for use on Safety Applications according to ECE-R10, ISO 13849-1 : CAT4 & PLe and IEC 62061 : SIL3 (LE 6XX SERIES); ISO 13849-1 : CAT2 & PLd and IEC 62061 : SIL2 (LE 4XX SERIES) Magtrol Load Measuring Pins are used to measure load and force, and provide overload protection. The pins are mounted into machines in place of normal shafts and fitted with strain gauges, allowing them to produce a signal proportional to the measured load. Manufactured in Switzerland, Magtrol’s LE Series Load Measuring Pins are rugged with high resistance stainless steel and tight construction. Available in several standard ranges from 2.5 kN to 1 250 kN. .... more information www.magtrol.com

Load measuring shackles designed to measure subsea tension forces. o CE certified for hoisting applications Easy to install o Complete range of CE certified electronics, load limiters and display available

Custommade load pins designed to be installed at the same place of a common axle without change to the existing mechanical environment. Economical version of model 5000. o Complete range of CE certified electronics, load limiters and displays available for hoisting applications and lifts o Useful diameter smaller than or equal to 39 mm o With axial cable gland o Sturdy design

Our model 5000 is designed to measure a force or constraint, without any change to the mechanical structure, simply by replacing the clevis pin with our custommade load pin. Sturdy design o Easy to install o Complete range of CE certified electronics, load limiters and displays available for hoisting applications and lifts

Load pins with standard dimensions. o CE certified for hoisting applications o Sturdy design Easy to install o Complete range of CE certified electronics and load limiters

Annular force transducers specially designed for applications requiring a load mesurement through a centred hole. o Sturdy design Easy to install o CE certified for hoisting applications o Complete range of "CE" certified electronics and load limiters

Load measuring shackles designed to measure tension force. o CE certified for hoisting applications o Sturdy design Easy to install Complete range of CE certified electronics and load limiters

Load cells specially designed to measure the tension force applied to a running cable or running rope. o Custommade design according to your needs type of rope (steel, synthetic, optical fiber, umbilical) capacity rope diameter (from 6 up to 115 mm) maximum winding speed accuracy Material load pin stainless steel other nickelplated steel or stainless steel (option) o Complete range of CE certified electronics and load limitation devices available

Low cost load cells specially designed to measure the tension force on hoisting ropes. o CE certified for hoisting applications o Easy installation directly without dismantling on the hoisting rope o Wide range of measured loads on cable (from 0.25 up to 24 t) and suitable cables (available diameters from 6 up to 46 mm) o Material 5500 stainless steel 5505 nickelplated steel Sturdy design o Reliable and economical solution o Complete range of "CE" certified electronics and load limiters available

Tension link load cells specially designed for load limitation on hoisting devices. o Sturdy design o Breaking load > 500 % o CE certified for hoisting devices Easy to install (standard shackles) o Cable length 0.5...5 t 3 m (other lengths available on request) 10 t 6 m (other lengths available on request) o Complete range of CE certified electronics and load limiters available

Load cells specially designed to measure the tension force applied to a running wire rope. The removable center sheave enables easy installation without cutting the winch lines. o Wide range of cables (Ø from 6 up to 115 mm) other components stainless steel (5580) other components nickelplated steel (5585) o Complete range of CE certified electronics and load limitation devices available o Custommade manufacturing

•Continuous dosing as the belt advances. •Manual adjustment of the dosing head height, which lowers automatically for each dose. •Adjustable belt speeds on the screen. •The dosing control is managed by a servomotor system that gives the machine greater speed, smoothness and precision to work with a wide variety of densities. •Thanks to the servomotor the user can control the dosage quantity electronically as well as loading and/or unloading speeds. •Anti-drip movement with suction of the product. •All this with great precision and with the facility to pre-record these parameters in more than 100 recipes.