Results for
TROTEC GMBH
Germany
TTK 120 E Dehumidifier The TTK 120 E combines trendy design with advanced dehumidification technology in a durable housing construction. Thanks to its robust housing made of stainless steel the TTK 120 defies even the harshest application environments. This makes it to be a flexible dehumidifier from keeping dry living areas, archieves, store rooms as far as drying up after water damages. The change from one operation location to another can be easily achieved due to steering wheels and bar handles on both sides. Special features: SuperDry function (permanent drying) Automatic hygrostat controlled dehumidification Easy-care material combination with an eye-catching look Electronic automatic defrost Warning lamp: to indicate that the water tank is full Overflow protection with auto power off Carry handles, swivel casters Connectivity for an extern condensate drain
Request for a quoteEDIT ELEKTRONIK SIST SAN VE TIC LTD STI
Turkey
They are filter reactors used to reduce the current harmonics (THDI) in the network installation to the values required by the standards. It is used in Reactive Power Compensation systems to limit the overcurrents that occur during the switching of the capacitor groups and to protect the capacitors. ●Harmonic Filter Reactors ●Copper and Aluminum winding ●High efficiency sheet core ●Varnishing under vacuum ●Oven drying at high temperature ●Three Phases and single Phase
Request for a quoteSIA ATTA-1
Latvia
Very small installation depth: < 20 mm Without claws. With rotary control, two-way switch and soft-catch. 2-wire connection (neutral conductor not required) Optimised for dimming of retrofit LED lamps (LEDi). For dimmable Retrofit-LEDs (LEDi). For dimmable Retrofit-LEDs (LEDi) with conventional or electronic transformers. For incandescent lamps, 230 V tungsten halogen lamps, low-voltage halogen lamps with conventional or electronic transformers and dimmable energy-saving halogen lamps. Mix operaton of LEDi with conventional loads possible. With manually adjustable operating mode: trailing / leading edge control. With adjustable minimum/maximum brightness. Low-noise level by MOSFET transistors. With electronic short-circuit protection. With electronic overload protection. Without cover plate. Rated voltage: 230 V~, + 10% / - 10% Rated frequency: 50 Hz/60 Hz Nominal power: 2 - 100 W/VA (leading edge control) Nominal power: 2 - 400 W/VA (trailing edge control)
Request for a quoteSIA ATTA-1
Latvia
With rotary control, two-way switch and soft-catch. 2-wire connection (neutral conductor not required) Optimised for dimming of retrofit LED lamps (LEDi). For dimmable Retrofit-LEDs (LEDi). For dimmable Retrofit-LEDs (LEDi) with conventional or electronic transformers. For incandescent lamps, 230 V tungsten halogen lamps, low-voltage halogen lamps with conventional or electronic transformers and dimmable energy-saving halogen lamps. Mix operaton of LEDi with conventional loads possible. Via mode switch adjustable between leading edge control and trailing edge control. Low-noise level by MOSFET transistors. With electronic short-circuit protection. With electronic overload protection. With adjustable minimum brightness. Without cover plate. Rated voltage: 230 V~, + 10% / - 10% Rated frequency: 50 Hz/60 Hz Nominal power: 2 - 100 W/VA (retrofit LED loads). Nominal power: 10 - 250 W/VA (non-LED loads).
Request for a quoteCOMPUR MONITORS GMBH & CO. KG
Germany
Statox 501 Infratox detects gases in the LEL and ppm range. Protecting people and assets from hydrocarbons The infrared absorption method of gas detection is ideal to detect hydrocarbons such as fuels. It features enough sensitivity to expand the range of application into the ppm range. For instance fuels such as gasoline, diesel or kerosene are mixtures of hydrocarbons. Infrared gas detection theory of operation Some gases absorb light at a certain wavelength (colour). This absorption band is specific to the gas. The rate of the absorption depends not only on the substance to be detected but also on the number of gas molecules (i.e. the concentration of the gas). This premise is used to detect gases. For example, the C - H bond in hydrocarbon molecules will oscillate and absorb light at 3, 4 mm. This fact makes it so easy to detect fuels. Hexane, for instance has 14 C - H bonds compared to Methane which has only 4! A light beam is directed through a cuvette filled with the gas to be detected. The more hydrocarbons are present, the more light will be absorbed. A photo detector at the other end of the cuvette measures the remaining light intensity. The difference between the original and remaining light intensity corresponds to the gas concentration. A reference beam with a different wavelength compensates for potential interferences of dust, humidity or variations of intensity from the light source. Fail-safe technology Failure of important components such as the light source or photo detector will trigger a "system fail" alarm. Most local authorities will accept this as a self-diagnostic feature. Systems including a self-check require less maintenance and calibration, saving time and money. Simple maintenance: Easy to read display and non-Vintrusive calibration The bright LED display of the Statox 501 Infratox shows the gas concentration in percent L.E.L. (Lower Explosion Limit). An important accessory is the calibration adapter, featuring control buttons operating Hall-sensors inside the Ex d housing. The service menu is password protected preventing unauthorised access. All parameters can be checked and changed, or a calibration can be done all without opening the transmitter. The adapter is also equipped with a gas outlet so that it can be used for flow-through applications. Impervious compact design The dimensions of the Statox 501 Infratox are small and compact. The sensor compartment is completely sealed, not allowing dust or insects to enter. It is located in the center of the sensor head. This allows heat radiation from the electronics and the infrared lamp to keep the unit a few degrees above the ambient temperature thus avoiding condensation. This innovative design makes any additional heating unnecessary, allowing the sensor head to be very energy efficient. This saves additional money by eliminating more expensive wiring and a bigger power supply that would otherwise be necessary. The sensor head is rated protection class IP 67 (6 = protection even against fine dust, 7 = submerged 1 m deep in water for 30 minutes). You can have confidence that this system will safely operate even in the harshest environment.
Request for a quoteMUCCO WARNING LIGHTS
Turkey
MUCCO Heavy duty series are combinations of Industrial Illuminated Sirens, Warning Lamps, and Electronic Sirens. This siren is generally used in the most difficult conditions in industrial areas. It is resistant to harsh weather conditions. Lens: Polycarbonate Lens Diameter: 125mm LED Module: 3W POWER LED life duration: 50.000 hrs Light Colors: Red, Green, Yellow, Blue, White Light Modes: Steady, Flashing, Strobing, Rotary Sound: 7 melodies Volume: 90-133dB Sound and Light can be controlled separately Housing: ABS / Metal Mounting Types: Surface & Wall Protection Cage against strokes Does not affected by water, dust, heat, and UV rays Warranty: 2 Years Voltage Options: Option 1: 12-24V AC/DC Option 2: 12-30V AC/DC Option 3: 48V/DC Option 4: 85-260V AC/DC
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
Results for
Electronic lamps - Import exportNumber of results
6 ProductsCountries
Company type