Electronic control unit - Import export

The B250 is a completely electronically controlled disc humidifier that is fitted with an electonic sensor, which permits indicates the level of moisture in the air. Just configure the humidistat to the desired humidity, the one that’s right for you and the application and allow the completely electronic controlled unit do the rest. It is extremely nice to possess something that offers great dependability. The key lock is an extra feature that is purposed to provides added peace of mind. Simply input your exclusive combination to lock the units keypad and avoid unauthorized use, tampering or accidental access that may change the overall settings. Owing to the phrase used in Germany "trust is good, control is better" The B250 has a water level gauge that is located in the operational panel. Furthermore, there is no need stress about the unit going up in smoke of short circuiting.

The TRITONE labeller was made by dividing it into modules, so as to allow use in both horizontal and vertical positions and easy integration into the packaging lines. The control is entrusted to a microprocessor, which manages the pre-separation in mm. and regulates the speed from 0 to 30 mt. min. TECHNICAL FEATURES Stepper motor with variable speed from 5 to 30 mt./min. Maximum label width mm. 100 Minimum label width mm. 20 Maximum label length mm. 300 (higher on request) Minimum label length mm. 20 Label application delay via electronic setting Label application precision mm. 0.5 Label reel with internal diameter mm. 40-76, external mm. 300 max Rewinding roller for silicon paper recovery Variable reading photocell for label stop REFLEX photocell for product detection End of roll alarm (optional) Electronic control unit Switch Stroke counter with zero setting Protection fuses Potentiometer for speed adjustment of labeling head Power supply 220 V 50 Hz. Dimensions mm.

The industrial automation and control switchboards produced by Electroalfa are designed for the technological installations in the following fields of activity: Transport and distribution of electrical energy Water infrastructure: production/ transport drinkable water, collection/ treatment of waste water, irrigation/draining works (HVAC) of civil and industrial buildings, Oil and gas extraction/transport For the manufacturing of panels and sub-units of electronic controls, Electroalfa uses products made by well-known brands, such as SIEMENS, EATON, Schneider Electric, ABB, Danfoss, Rockwell Automation.

aluDISPLAY is a display enclosure available in three widths, with a modern design and well-thought out product features. Ideal for electronic controls and operating units with flat modules. Assembly or removal of the enclosure is extremely quick thanks to snap-on covering profiles. An internal profile slot enables circuit boards to be easily inserted or for system components to be directly attached with spring nuts. The front plate is ideal for the attachment of membrane keypads or the attachment of touchpanels. The aluDISPLAY can be connected with the ROLEC suspension arm system, taraPLUS, using the compatible end cover.

Automatic Divider Machine Specifications Weight adjustment by touchscreen panel • The main body is made completely of stainless steel. • Dough counting screen • Electronic speed control unit • Dough twicing system on the conveyor band. • Drum surface chrome plated. • Piston slot is made of stainless steel. • Vacuum piston is made of anti-oxidation materia Manuel Dividing Machine Specifications Weight adjustment by hand wheel • The main body is made completely stainless steel • Drum surface chrome plated • Piston slot is made of stainless steel. • Vacuum piston is made of anti-oxidation material. • 24 V Control board • Closed circuit lubrication system. • Piston movies to discharge position automatically when the machine shut-off • 70 kg. hopper capacity • Stainless steel lids. • Belt/pulley power transmission system Option Single or double piston 50-200, 100-600 and 250-1000 gr dividing range Manual and touchscreen control panel Teflon coated hopper Big sized hopper (140 lt dough capac

Interact with your digital instrument clusters for a full ergonomic simulation TechViz I3 option is easy to use and enables to visualize human-machine interaction scenarios, combining non-3D elements within a 3D model. Interact Instantly with your Digital Instrument Clusters, Digital Infotainment, Navigation Systems, Digital Speedometer, Digital Electronic Control Unit, Digital climate control or any kind of HMI in your product design. The aim is to emulate a touch-sensitive interaction with HMI in an immersive environment. These HMI are independent 2D applications integrated in the mock-up. For exemple in a virtual car, user’s fingers can be tracked thanks to a thimble for interaction with the virtual GPS interface. The collision between the interaction tool and the user interface emulates a computer mouse click. It enables to create various scenarios such as testing hand accessibility to the main commands from the driver seat of a car.

Application: Solenoid valve system for automatic monitoring the leaks of water supply pipes and tubes. To be used in household and laboratory equipment. Installation Fully automatic monitoring can be built in to the supply pipes of a water source. The sensor lays on the floor and is connected with the control electronics through a cable. The solenoid coil and control electronics are built in to a plastic housing. The voltage supply occurs over a network cable with an adapter connector. Function: Upon energizing, the control electronics opens the solenoid valve. The sensor can monitor a water film of approximately 0.5 mm and sends a signal to the electronics. The solenoid valve is closed and an audible alarm signal is triggered. This condition will be reset by interrupting the power supply. • Normal widths from DN10 to DN50 • Fittings G1/2 to G2 • Piezo alarm system • LED indicator of operation • Drinking water admittance on enquiry

The dynamometers series TesT 323 include a force transducer and a process-controlled electronic unit with advanced software under Windows CE. Various functions are adapted to the daily requirements of quality assurance. An integrated data logger with 4 MB, supplemented by an SD card with 2 GB storage space allows, f.e., saving peak values and/or curves in xls files. Online or after use the data can be transferred to a computer via an USB 2.0 port, for further processing / storage. Basic settings, that had been stored once, even remain when the device has been switched off. After switching it on the device is immediately ready for usage again. The handy case with its ergonomic design is suitable for right and left handers. A fixed mounting in a testing fixture is also possible. Rechargeable batteries provide a smooth and mobile use for more than 10 hours. These robust devices are suitable for industrial applications. The calibration is carried out with reference instruments or weights.

The electronic handheld dynamometers model TesT 326 include a force transducer and a process-controlled electronic unit with advanced software. The standard version includes the most frequently used features in quality assurance: Peak Value Storage for Tensile and Compressive Forces, Choice of Unit: N, kg, lbs, On / off switch. Basic settings, that had been stored once, even remain when the device has been switched off. After turning it on the device is immediately ready for usage again. This handy case with its ergonomic design is suitable for right and left handers. A fixed mounting in a testing fixture is also possible. Rechargeable batteries provide a smooth and mobile use for more than 10 hours. These robust devices are suitable for industrial applications and can be recharged overnight. The calibration is carried out with reference instruments or weights, which are in turn calibrated regularly by DAkkS approved bodies. The traceability to ISO 9000 ff is thus guaranteed.

The mobile evaluation electronics TesT 813 meet all demands that precise measurement processes require. They have been designed for use with TesT force and torque transducers, but they are also suitable for other resistance-based transducers. The devices consist of a process-controlled electronic unit with advanced software under Windows CE. Various functions are adapted to the daily requirements of quality assurance. An integrated data logger allows f.e., saving peak values and/or curves in xls files. Basic settings, that had been stored once, even remain when the device has been switched off. Because of the high measurement frequency of up to 2 kHz the model can be used for static and dynamic measurements. Sensors that are equipped with TEDS (Transducer Electronic Data Sheet according to IEEE 1451.4) chips can be recognized and automatically calibrate. Thus, the units may operate with different sensors, so that a complex recalibration is not required.

The TesT electronic indicators of type 816 contain a process controlled electronic unit with most modern software. They can be combined with all TesT force sensors. The standard version of this device includes the usual functions in quality assurance: Peak value memory for tensile and compressive forces, selectable units: N, kg or lbs, On / Off switch. A list of options can be found below in the technical data. Basic settings, that had been stored once, even remain when the device has been switched off. After turning it on the device is immediately ready for usage again. This handy case with its ergonomic design is suitable for right and left handers. A fixed mounting in a testing fixture is also possible. Rechargeable batteries provide a smooth and mobile use for more than 10 hours. These robust devices are suitable for industrial applications and can be recharged overnight.

Compact direct current electronic control unit IBP8k-2,0/48R-4.4 is designed to ensure uninterrupted operation of telecommunication equipment with power up to 8 kW. Thanks to the modular design, power units easily replaceable during repair and maintenance. Operating range of AC power supply network is from 85 to 300 V with short-term emissions of up to 350 V. Thermal compensation system for the battery charge voltage allows extending its service life. EPU case made in the standard format of a 19" telecommunication rack with a height of only 2U, which ensures its compact placement. Remote monitoring of operation via RS-232/485 and SNMP is possible.

THOR represents one or two superpowerful loudspeakers housed in spheroidal structures made of titanium-steel alloy. The system is suitable for absolutely any modern car. You will only need CAN-bus of your car`s engine to install THOR system. It is CAN-bus via which a complete synchronization of electronic exhaust system and your engine operation is performed. Installation warranty is two years. Service life of the device is unlimited. The device is designed and manufactured in Russia. ADVANTAGES - Maximum volume and similarity of sound - Does not void car warranty - Over 20 legendary sport car sounds - Service life over 10 years - Custom settings: volume, pops, dynamic start etc. Suitable for any car from model year 2005. System installation - Install speaker acoustic system at the car bottom - Connect THOR electronic control unit to CAN and ACC circuits - Connect system components - Install THOR app. The system is ready for operation.

THOR represents one or two superpowerful loudspeakers housed in spheroidal structures made of titanium-steel alloy. The system is suitable for absolutely any modern car. You will only need CAN-bus of your car`s engine to install THOR system. It is CAN-bus via which a complete synchronization of electronic exhaust system and your engine operation is performed. Installation warranty is two years. Service life of the device is unlimited. The device is designed and manufactured in Russia. ADVANTAGES - Maximum volume and similarity of sound - Does not void car warranty - Over 20 legendary sport car sounds - Service life over 10 years - Custom settings: volume, pops, dynamic start etc. Suitable for any car from model year 2005. System installation - Install speaker acoustic system at the car bottom - Connect THOR electronic control unit to CAN and ACC circuits - Connect system components - Install THOR app. The system is ready for operation.

A wide variaty of control units, from Vestas CT unites to Mita-Teknik controllers and specific Dan control parts for Neg Micon and many other controls for Nordex, Vestas and other wind turbine brands.

Remote controllers with key switches or with key switches and screen-displays for permanent 100 % security, used with all MedicCleanAir units. Remote controller RC 100 with key switches Key switch to select speed. Connects directly to the air purification unit or isolation unit / no seperate power supply needed. Avoids undesirable external use (only hospital staff)