Results for
IGUS® GMBH
Germany
Find the suitable motor for your application: simply enter your requirements and receive suitable suggestions.
Request for a quoteIGUS® GMBH
Germany
The new direct-current motors with worm gear enable quiet and economically efficient operation with drylin® lead screw units. The worm wheel has a spline to which the drive pin of the linear unit is connected. As a result, a motor flange and coupling are unnecessary and, this taken in conjunction with the motor adapter angled by 90°, the structure of the linear module is very compact. Thanks to the integrated magnetic rotary encoder (2-channel hall), the new DC motors are suitable for positioning. - Space-saving and compact design - Easy to fit - Quiet operation - Rotary position encoder included - Suitable for: SLW-BB, SAW, ZLW
Request for a quoteIGUS® GMBH
Germany
When combined with the appropriate gearbox, drylin® linear axes with the new BLDC motors achieve higher speed and greater torque. Energy is used more efficiently, as a result of which EC/BLDC motors are more durable and have a longer service life. Due to the fact that carbon brushes are not used, brushless motors are almost completely wear-resistant, generate less heat and enable longer, uninterrupted operation. The EC/BLDC motors have the same connections as NEMA 17/23/24/34 stepper motors. - Brushless motors enable higher speed and greater torque - Longer operating time and service life - Virtually wear-free - Less heat generated - for all drylin® linear modules and axes with NEMA17/23/24/34 hole pattern
Request for a quoteIGUS® GMBH
Germany
Versatile choice due to the high torque and speed. This motor is the best choice for most applications with medium loads. Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, their precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection. The connector interface provides a high IP65 protection level (IP: International Protection). The higher the IP rating, the better the motor is protected from the ingress of dirt and water. The encoder sends signals from the motor to the motor control. The encoder verifies that the required linear motion has occurred precisely as required. Encoder = increased machine accuracy.
Request for a quoteIGUS® GMBH
Germany
This little motor has impressive torque and high RPMs. Reliable operation with quick movements of low loads. Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, their precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection. Motors with stranded wires are the least expensive and the most common stepper motors. The connecting wires for this type exit from the housing and will be connected with a JST connector. They are usually installed in machines and equipment that have an additional housing or are used in clean environments.
Request for a quoteIGUS® GMBH
Germany
For designs that require a stepper motor with directly integrated lead screw, drylin® E offers the ideal solution. The stand-alone versions with NEMA11 stepper motor (very small type) are available in a compact type with or without encoder. The lead screw is centred and in combination with the dryspin® high helix thread technology, the system has a long service life. Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection. The encoder sends signals from the motor to the motor control. The encoder verifies that the required linear motion has occurred precisely as required. Encoder = increased machine accuracy.
Request for a quoteFOCQUET
Belgium
"We offer unbalanced vibration motors. The vibrators can be installed in any position to maximize the centrifugal force. Features: - On request in 220-240/380-415 volts - 50 Hz and 220-240/440-480 volts - 50 Hz. - Static moments expressed for a single vibrator. - Type of protection IP 66/7 - Insulation class: F (155°C). - Tropicalized motor as standard. - Operating temperature : -30°C to +40°C. - Reference standard: CEI EN 60034."
Request for a quoteFOCQUET
Belgium
"Focquet offers three-phase induction motors in cast iron or aluminum housings. The dimensions and power correspond to the values of a standard motor, but have been modified to allow braking applications. The disc brake is supplied with direct or three-phase alternating current by a rectifier located in the motor terminal block. Our solution is always a parking brake. Standard motor size and power rating, aluminum and cast iron chassis."
Request for a quoteFOCQUET
Belgium
"We offer stainless steel motors to provide solutions for our customers in industries sensitive to moisture and bacteria. The design is smooth and round to minimize dirt build-up. Features: - IP66 protection - 0.25kW to 7.5kW - Available in 1500 or 1000t/min - IE3 efficiency - Foot or flange mounted - Other options are available"
Request for a quoteFOCQUET
Belgium
"The world is changing and companies are under increasing pressure from environmental policies. An international standard was established in 2008 and updated in 2014 to classify the international energy efficiency (IE) of low-voltage three-phase induction motors. This is the IEC/EN 60034-30.1 standard. It reinforces the balance of international efficiency regulations. At Focquet, we have more and more IE4 motors to meet the needs of our environmentally conscious customers. We continue to invest heavily in this type of motor. STANDARD CAST IRON IE4 MOTORS: - Three-phase motors with cast iron housing - IP55 protection - Class F insulation - Heating class B - Stored in 230/400V - 400/690V or 500V - Operating in 50/60hz - Other special voltages or insulation class H on request - Stored speed: 3000 rpm or 1500 rpm or 1000 rpm or 750 rpm - Efficiency IE4 - Form B3-B5-V1-B14-B35-V15-B34 - Standard motors equipped with PTC sensors from size 132 onwards - ...
Request for a quoteKAISER-MOTOREN GMBH
Germany
Watercooled electric motors can be realised in any possible mechanical and electrical customised version. They can be realised in vacuum tight version for fan drive on thermal treating oven.
Request for a quoteFÖHRENBACH GMBH
Germany
2-phase stepper motors Our 2-phase stepper motors are reliable and low-cost drives with a long service life. They are available in different sizes and types of power output, are continuously developed and are thus suitable for a variety of applications. AC servo motors The AC servo motors meet the highest demands regarding dynamics and accuracy and are used if dynamic, exact positioning or smooth running characteristics are required. The different types of power output and sizes cover the most diverse requirements. The benefits at a glance Highly dynamic High efficiency Long service life
Request for a quoteKAISER-MOTOREN GMBH
Germany
Electric motors are available in nearly any mechanical and electrical customised version
Request for a quotePJM MECHANICAL CO.,LTD
China
Usually,universal motor Applications like following: Soybean Milk Machine,Food Machine,Meat Grinder,Electric tools High torque,special coils,low cost design Power tool motor are often design by Universal motor.Recently,more and more customer choose our BLDC motor for replacement.
Request for a quotePJM MECHANICAL CO.,LTD
China
This type motor are used for motorised window,motorised curtain and more.12V,8000 rpm speed,0.018NM torque,78mm length motor housing,shaft could be designed for your special application.
Request for a quoteNICHIBO DC MOTOR
Taiwan R.O.C.
Manufacturer of electric motors including brushless DC motors. Used in electric tools, home, automotive, medical, printing, and computer applications. Motors can be customized. voltage 12v rated speed 5800 RPM rated torque 52 mNm output 30 W
Request for a quoteNICHIBO DC MOTOR
Taiwan R.O.C.
Manufacturer of electric motors including brushless DC motors. Used in electric tools, home, automotive, medical, printing, and computer applications. Motors can be customized. voltage 18v 18v rated speed 18000 22300 RPM rated torque 88.82 118.43 mNm output 167.35 236.17 W EFF 80 75 %
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
NICHIBO DC MOTOR
Taiwan R.O.C.
Manufacturer of electric motors including brushless DC motors. Used in electric tools, home, automotive, medical, printing, and computer applications. Motors can be customized. Three-Phase BLDC (Brushless Direct Current Motor) comes in smaller size with advantages of energy-saving, and high efficiency. •High-voltage driving to reduce transfer loses •Sensor-less phase detected •Low phase switching noise •Sine-wave control. •Support both of linear and digital (PWM) control signal •High efficiency for power saving. voltage 12v 12v 12v 24v rated speed 2250 10700 8800 5100 RPM rated torque 6.13 13.7 11.4 8.12 mNm output 1.4 15.46 4.37 10.63 W EFF 55 76 70 75 %
Request for a quoteNICHIBO DC MOTOR
Taiwan R.O.C.
Manufacturer of electric motors including brushless DC motors. Used in electric tools, home, automotive, medical, printing, and computer applications. Motors can be customized. voltage 12v 24v 18v 36v rated speed 2400 7700 37000 17000 RPM rated torque 21.33 44.97 0.05 0.05 mNm output 5.4 36.69 197.78 96.26 W EFF 74 76 78 90 %
Request for a quoteNICHIBO DC MOTOR
Taiwan R.O.C.
Manufacturer of electric motors including brushless DC motors. Used in electric tools, home, automotive, medical, printing, and computer applications. Motors can be customized. voltage 20.7v 18v rated speed 14000 16000 RPM rated torque 171.2 327 mNm output 245.4 572 W
Request for a quoteResults for
Electric motors serviced - Import exportNumber of results
60 ProductsCountries
Company type