Dynamometers - Import export

Magtrol’s Model DSP7000 High Speed Programmable Dynamometer Controller employs state-of-the-art Digital Signal Processing Technology to provide superior motor testing capabilities. Designed for use with any Magtrol Hysteresis, Eddy-Current or Powder Dynamometer, Magtrol In-Line Torque Transducer or auxiliary instrumentation, the DSP7000 can provide complete PC control via the USB or optional IEEE-488 or RS-232 interface. With up to 500 readings per second, the DSP7000 is ideally suited for both the test lab and the production line.

Eddy-Current Brake Dynamometers (WB Series) are ideal for applications requiring high speeds and also when operating in the middle to high power range. Eddy-Current Brakes provide increasing torque as the speed increases, reaching peak torque at rated speed. The dynamometers have low inertia as a result of small rotor diameter. Brake cooling is provided by a water circulation system, which passes inside the stator to dissipate heat generated by the braking power, providing high continuous power ratings (max. 140 kW). The WB dynamometers have accuracy ratings of ± 0.3% to 0.5% full scale (± 2% for WB 2.7), depending on size and system configuration. Additional options include: high-speed version, speed pickup, mechanical rotor blocking device, OEM version IS and vertical mounting.

Our engine test beds are modular systems existing of control unit, dynamometer and mobile engine supports. Applications: Determination of engine performance, runnning engines under a defined load in order to determine other measuring values. Fields of application: Science, development, quality control by manufacturers and control authorities, education (especially air cooled dynamometers). New: Container for outdoor installation for performance testing at combustion engines with all kinds of dynamometers. Our range of engine test beds: - with eddy-current brakes (air-cooled or water-cooled) - low-inertia hydrostatic braking dynamometers - braking dynamometers with water brake - regenerative 4-Q-dynamometers - electric generators, loaded by resistors

The electronic handheld dynamometers model TesT 326 include a force transducer and a process-controlled electronic unit with advanced software. The standard version includes the most frequently used features in quality assurance: Peak Value Storage for Tensile and Compressive Forces, Choice of Unit: N, kg, lbs, On / off switch. Basic settings, that had been stored once, even remain when the device has been switched off. After turning it on the device is immediately ready for usage again. This handy case with its ergonomic design is suitable for right and left handers. A fixed mounting in a testing fixture is also possible. Rechargeable batteries provide a smooth and mobile use for more than 10 hours. These robust devices are suitable for industrial applications and can be recharged overnight. The calibration is carried out with reference instruments or weights, which are in turn calibrated regularly by DAkkS approved bodies. The traceability to ISO 9000 ff is thus guaranteed.

The dynamometers series TesT 323 include a force transducer and a process-controlled electronic unit with advanced software under Windows CE. Various functions are adapted to the daily requirements of quality assurance. An integrated data logger with 4 MB, supplemented by an SD card with 2 GB storage space allows, f.e., saving peak values and/or curves in xls files. Online or after use the data can be transferred to a computer via an USB 2.0 port, for further processing / storage. Basic settings, that had been stored once, even remain when the device has been switched off. After switching it on the device is immediately ready for usage again. The handy case with its ergonomic design is suitable for right and left handers. A fixed mounting in a testing fixture is also possible. Rechargeable batteries provide a smooth and mobile use for more than 10 hours. These robust devices are suitable for industrial applications. The calibration is carried out with reference instruments or weights.

The TesT electronic indicators of type 816 contain a process controlled electronic unit with most modern software. They can be combined with all TesT force sensors. The standard version of this device includes the usual functions in quality assurance: Peak value memory for tensile and compressive forces, selectable units: N, kg or lbs, On / Off switch. A list of options can be found below in the technical data. Basic settings, that had been stored once, even remain when the device has been switched off. After turning it on the device is immediately ready for usage again. This handy case with its ergonomic design is suitable for right and left handers. A fixed mounting in a testing fixture is also possible. Rechargeable batteries provide a smooth and mobile use for more than 10 hours. These robust devices are suitable for industrial applications and can be recharged overnight.

Our Test Dynamometer offers invaluable insights into the durability and expected lifespan of crucial components like transmissions, axles, gears, transfer cases, and shafts. Designed to simulate various scenarios, this system provides comprehensive testing capabilities to ensure optimal performance under real-world conditions. For a more comprehensive approach, we offer custom solutions that replicate vehicle-level tests without the need for on-road trials. By mimicking powertrain-induced error situations, these tailored systems pinpoint potential issues, enabling engineering teams to develop effective solutions and iterate efficiently. At the core of our Test Dynamometer is an intuitive user interface, prioritizing simplicity in test case setup and execution. With minimal training, operators in test centers can effortlessly navigate the system and conduct a diverse range of scenarios, enhancing productivity and efficiency.

Make informed decisions with our Test Dynamometer service. Our comprehensive data collection process gathers valuable insights from low-speed channels, fast channels, and a variety of sensors. With detailed analysis and reporting, we empower your engineering team to make data-driven decisions that drive innovation and success. Key Features: Comprehensive data collection from diverse sensor types Detailed analysis and reporting for actionable insights Customizable test scenarios to address specific requirements Expert support and guidance throughout the testing process

Accelerate your product development cycle with our Test Dynamometer service. Our system enables accelerated testing of transmissions, axles, gears, and other rotating elements to identify potential issues early in the development process. With fast data collection and intuitive user interface, we help you iterate quickly and efficiently. Key Features: Accelerated testing for faster product development Comprehensive data collection from low-speed and fast channels Quick setup and execution of test cases Expert support and training for test center operators

These digital dynamometers are precise (0.1%) and lightweight (aluminum). Their lightness will make your task easier if you are performing Periodic Checks of lifting devices or tugboat pulling force controls. They are available in 2 versions: with an integrated display. Without display, the weight being shown on a 2.4 GHz radio remote control equipped with a 6-digit display. The radio range is 1000 m (on the front side of the dynamometer). The same remote control can be paired with 4 dynamometers simultaneously and display individual values or the sum of the 4 loads. Functions: Units: kg, t, lb, kN; tare; peak They are equipped with an audible warning to alert in case of overload. Protection rating: IP65 with integrated display IP67 without display - Associated remote control IP65 Power supply: Model with display: 1 x 9V PP3 battery Model without display: 4 x LR6 AA batteries in dynamometer (2 x LR6 AA batteries for the remote control)

MSD Mega Speed Dynamometer is the latest Magtrol innovation in the very high-speed motor and system testing. Challenged by its numerous customers in the Dental and Surgical field, Magtrol is pushing the limit to a level which was never reached. The braking effect is based on Eddy-Current induced on an aluminum disc directly mounted on the DUT (Device Under Test) shaft. Torque is measured frictionless by a 20 mN·m Reaction Torque Sensor having a resolution of 0.01 mN·m. Due to the thermal effect on the disc, the Mega Speed Dynamometer is not suit­able for endurance testing, but can be used to generate a fast curve or perform point to point testing. An infrared sensor monitors the temperature of the disc and stops the test in case of overheating. The disc can be designed and sized according to the motor parameters. The system is contactless therefore alignment is not critical and the inertia is very low (no friction, no residual or drag torque).... more info: www.magtrol.com

The digital dynamometer allows making simple but precise measurements of the pressure in every single lower lifters during the adjustment of the seaming machine. The dynamometer is equipped with a detailed instruction manual and a number of feeler gauges suitable for different can heights. The Dynamometer is available in both with metric or imperial scales.

The digital dynamometer for beverage cans is used to simply but precisely measure the pressure of every single lower lifters during the adjustment of the seaming machine. The main feature of this instrument is its practicality of measurement and major ease of reading compared to the standard digital one, as it is equipped with a cable that allows readings of parameters reaching every area of the machine.

Just as the digital dynamometer, the hydraulic dynamometer is used to measure the pressure of every single lower lifter during the adjustment of the seaming machine. It provides a faster but less accurate measurement than the digital dynamometer.

Our Test Dynamometer service offers comprehensive durability testing for a wide range of rotating elements, including transmissions, axles, gears, transfer cases, and shafts. With our advanced system, we can simulate various scenarios to evaluate the durability and expected lifespan of these critical components. Key Features: Customized testing scenarios to replicate real-world conditions Precise data collection using state-of-the-art sensors Easy-to-use user interface for simplified test setup and execution Dedicated support and training for test center operators

This system is very valuable for testing the durability and expected life of the transmissions, axles, gears, transfer cases and shafts under various scenarios. It is hard to do vehicle level durability tests and without the need of getting the vehicle on the road for replicating claims caused by the powertrain, such type of a custom system help replicate the driving conditions where problems occur and the engineering team can develop a solution and iterate on the bench. Easy to use user interface; simplicity in get the system running in a target time is our most important goal. Operators in a test center can quickly receive training and begin running a variety of scenarios. Data from low speed channels such as sensors including thermocouples, RTD temperature sensors, pressure sensors and others can be collected whereas data from fast channels such as acceleration or microphone are collected through data collection (DAQ) systems, depending on the customer's preference.

For Example: Container 40 ft for outdoor installation for performance testing at combustion engines with all kinds of dynamometers. Depending on the kind of the installed dynamometer, external supply beyond electricity (e.g. for cooling water) will be required. Thanks to our mobile engine supports, there is no need of an overhead gantry crane or any other lifting device.

Modular system consisting of control unit with MP Computer, dynamometer and truck engine onbuniversal engine support. Modular system consisting of: - control unit with MP Computer, - dynamometer (with air-cooled eddy-current brake or with water-cooled eddy-current brake) - and (truck engine on) universal engine support. Option: Equipment for fuel consumption metering on big engines for automatic gravimetric determination of the specific fuel consumption (sfc).

for testing e.g. high-speed internal combustion engines as chain saw engines low-speed internal combustion engines with one or few cylinders