Dust extraction - Import export

Cyclo-filters are devices, which are applied mainly in the heat industry to de-dust grate boilers. We apply them in order to warrant dust emission not exceeding 100 mg/Nm3 for 6% O2. ADVANTAGES Low investment and operational costs compared to bag filters and electro-filters The highest quality elements characteristic High efficiency of de-dusting< 100 mg/Nm3 for 6% O2 Long shelf-life of a unit Possibility of partial re-circulation of purified fumes to a boiler in order to reduce on O2 and NOx Guarantee of expected emission rate of dust and reliable operation of the dust extracting system ensured by filtration area adjusted properly to the boilers de-dusting process

Introducing integratedAIR Filtration’s BlueClean® VCP range of self-cleaning pulse jet cartridge filter units. A versatile range of high efficiency filter units incorporating conical filter elements providing highly effective filter cleaning even when dust loadings are high. Our VCP Square unit can be supplied as an insertable, flanged open base or complete free standing filter unit with each design being able to be supplied with or without inlet mounted fan sets. The VCP Square, a range of high quality pulse jet filter units designed for use within processing and dust control applications and part of the Industrial Air Filtration range, dust control filter units built without compromise.

Our BlueClean® HC PRO Lite is designed as a compact and cost-effective solution to your dust and fume extraction needs which can be supplied as a true ‘plug and play’ filter unit. All key elements of the unit are integral; therefore, easy to install and commission. The HC PRO Lite can house between 2 and 8 filter elements. This range is suitable for a wide range of dry dust process requirements.

Our BlueClean® HC PRO range of horizontally mounted cartridges are designed with maintenance and ease of use in mind. With multiple configurations available, this versatile range is suitable for a wide range of process requirements. True downflow cleaning technology with the dust laden air entering the unit at high level flowing downwards through the filter unit chamber using gravity and downwards air flow to aid dust release We install a single filter cartridge in each aperture reducing the number of filter seals present within the filter unit substantially reducing the risk of filter seal failure and dust by pass. With using a single filter element this provides a more active filter cleaning area improving the filter cleaning action. Our single filter cartridge design per access door reduces the risk of dust exposure when withdrawing filter elements. Ease of maintenance with tool less filter cartridge change.

It’s for selecting the materials adjusts or aches and non- needed, which are in the wheat. The rollers pushed on the It separates impurities such as seed, barley, rye, lentil, cracked wheat, long grain and absut in wheat, corn, lentil, rice, and similar grains and is used to separate the broken pieces. Foreign substances and broken grain in the product entering the rotating drum enter into specially made drum pockets with a rotating steel body by centrifugal force. When the rotating drum reaches a certain point, foreign substances and broken grains in the pockets fall into a special adjustable channel in the drum. While the cleaned grain comes out of the drum, foreign substances and broken grains falling into the channel are ejected by a spiral placed in the channel. During operation, the dry grain in the drum makes powder. This dust is extracted by low pressure air. In the food industry; In flour and semolina factories, Bulgur factories, In lentil cleaning facilities,

The three-disc sanding machine for perfect fine sanding! Among other things, it is characterised by its extremely effective dust extraction performance. Another highlight is the near-edge and direction-free sanding. The TRIO is also versatile, extremely user-friendly and easy to maintain. Its mode of operation enables sanding results with highest quality. When it comes to achieving a premium quality of a wooden surface, the TRIO is the right choice! For example oiling and colouring a wooden floor create special challenges, which require a high surface quality. This task is mastered by the TRIO as well. Its ergonomic construction allows easy handling with minimal physical strain. Both, the abrasive and the dust bag, can be changed quickly and easily. Due to the integrated filter system, the dust extraction is very efficient, which enables almost dust-free sanding.

The efficient solution for commercial areas and public buildings, such as sports or industrial halls. The SUPERHUMMEL is the first choice for the efficient sanding of large areas due to its powerful motor and its extra wide sanding drum. The SUPERHUMMEL stands for top sanding quality combined with a maximum area capacity. It is very user-friendly - easy to operate and at the same time to maintain. Both, changing the sanding belt and dismantling the machine, are extremely simple. The optimal dust extraction and the robust construction of the machine are a matter of course. Applications with the SUPERHUMMEL: The high-performance floor sanding machine with 300 mm (approx. 11.8”) sanding drum width has especially been designed for the efficient treatment of large-scale wooden floors, e.g. commercial areas and public buildings. The SUPERHUMMEL equipped with the hard rubber drum ensures an even removal on softwood floors with strong knots.

Worldwide: known, used and admired across the globe! The HUMMEL® is powerful, efficient and reliable. With its optimal dust extraction you are able to work almost dust free. The sophisticated and durable technology for perfect sanding along with its enormous performance quality make the HUMMEL® the undisputed number one machine for sanding wooden floors. It has been convincing craftsmen all over the world for over half a century. It is simultaneously powerful and easy to operate and maintain. Both changing the sanding belt and dismantling the machine are extremely simple. The HUMMEL® can be ordered with or without the powerful LED work light. Applications with the HUMMEL®: The HUMMEL® belt sander is mainly used for sanding wooden floors. It enables precise and economical sanding of both small and large surfaces.

CF 30 G equipment is supplied completely assembled and ready for operation. The dust collection unit is suited for intermittent operation only, because regular cleaning of the pocket filter element in certain intervals is an absolutely must for the proper operation of the equipment. The cleaning intervals will depend on the operating conditions and must be established by experience. Normally cleaning intervals will be between operating times of 30 minutes to two hours. It is a prerequisite for sufficient and intensive cleaning of the filter cloth that dust collecting is interrupted during cleaning to achieve static pressures on the filter material. A retention time of 1 - 2,5 minutes between the end of the suction and the beginning of the cleaning process is therefore required. The filtered air must be removed outside - do not lead back to closed rooms!

Rigid machine for heavy duty belt grinding. The machine can be adjusted for horizontal or vertical position. Various options include: Dust extraction, chamfering device, angle guide roller, longitudinal stop.

The removal of dust and electrostatic charges - we lead the way. Rotary ostrich-feather roller brushes remove dust from workpiece surfaces in accordance with a simple and reliable principle - due to their intrinsic electrostatic charge, the feathers lift dust from the workpiece surface. Gently and thoroughly. The dust ionised in this way remains on the feathers until removed by a suitable dust extraction system. Ostrich-feather roller brushes of Kullen-Koti consist of circular brush segments with standardised wooden cores, assembled to the requested face width and especially formed brush diameter for the car bodies. By using different outer diameters the roller brush can be adapted to the outline of the workpiece surface which is to be dedusted. Just contact us - without obligation - if you have any requirements.

Avola GAMA 65 V revolving cross cut / rip cut saw Equipment / scope of supply- Cutting heights 90° / 245 mm - 45° / 164 mm - 30° / 113 mm - Machine table with lateral movement approx. 400 mm with pneumatic brake system - Machine hood with lateral PVC protective curtains - pneumatic clamping cylinder left - right - pneumatic cross-cutting operation using two-hand control - electrical saw blade inclination 90 – 30° - Revolving table 0 - 270° - Laser light for cross-cutting - Saw bla de height adjustment via mechanical stop system with scale - TCT saw blade 650 mm, dust extraction spigots 160 / 125 mm - Drive motor 12 kW – direct motor speed 1/min – 3,000 - Saw blade speed 1/min – 3,000

REVOLVING CROSS CUT SAW WITH NC PROGRAMMING SYSTEM GAMA 65 K3 Fully automatic circular saw for positioning and controlling via touchscreen with length measuring system EXENSO COMFORT (Pusher system) Application Length stop system (pusher operation), revolving table and sawblade inclination via servo - motor for positioning ( cross cut, mitre cut or compound mitre cut) of heavy workpieces, i.e. carpenter industry, gluelam industry, log house industry, wooden frame work, solid wood, etc. Technical Equipment : - Motor rating 8,1 kW / 400 Vac-50Hz, star / delta start, direct driven - Motor speed 3.000 rpm - Electrical sawblade inclination 90-30° via servo motor - Laser light for cross cutting - Sawblade height at 90° / 245 mm – 45° / 164 mm – 30° / 113 mm - TCT – sawblade 650 x 30 x T 54 - Dust extraction spigot 125 / 80 mm - Revolving table 20° - 160° - Horizontal material clamping system, right - left - pneumatische Kappvorrichtung über ZweihandSteuerung/vollautomatisch

Avola GAMA 80 V carpenter’s circular saw bench for professional applications Equipment / scope of supply- Motor rating 22 kW (P1) / 400 Vac-50 Hz star delta start gear drive - Motor speed rpm 3.000 / sawblade speed rpm 2.200 - Cutting height 90° / 310 mm – 45° / 217 mm – 30° / 149 mm - Electrical sawblade inclination 90 – 30° - Revolving table 0-270° - Machine table with lateral movement 650 mm - Automatic vertical pneumatic clamping cylinders right / left - Laser light for cross cutting - TCT-sawblade, 800 x 30 x T90 - Dust extraction spigots 160 / 160 / 80 / 80 mm - Sawblade height adjustment via mechanical stop system, with measuring scale, easy to adjust - DUO infeed / outfeed devices

Avola GAMA 65 K Revolving Cross Cut Saw for professional applications Technical Equipment Motor rating 8,1 kW/400 Vac-50 Hz, star / delta start sawblade mounted direct on motor shaft Motor speed 3.000 rpm / sawblade speed 3.000 rpm Sawblade height at 90° / 245 mm – 45° / 164 mm – 30° / 113 mm Electrical sawblade inclination 90 – 30° – digital readout Revolving table 20° – 160° Two-hand pneumatic cross cutting operation Laser light for cross cutting position TCT-sawblade, dia. 650 x 30 mm x T 54 Dust extraction spigot 125 / 80 mm Options Additional clamping cylinders, horizontal, left-right Brush curtain for safety clamping hood

Strip Brush is available in 5mm, 8mm & 10mm backing strip. Filled in black nylon in trim lengths of 10mm - 1200mm. Suitable for closure sealing, draught excluding, dust extraction, conveyors and many industrial & household uses. See below for some of the most common sizes, however as a manufacturer we can produce whatever you need. We have facilities to contour or profile any shapes & sizes to suit your requirements. ALL SIZES & MATERIALS ARE AVAILABLE ON REQUEST. PLEASE CALL US FOR FAST FRIENDLY ADVICE.

ZINSER GmbH offers an extensive range of accessories to optimize your flame cutting machines. Our accessories are designed to maximize the efficiency and performance of your cutting processes by allowing you to optimally adapt your machines to your specific requirements. Plasma systems Our plasma systems offer precise and fast cutting of metals and are ideal for various applications. With our plasma systems you can achieve clean and precise cuts with minimal material loss. Cutting tables with and without extraction Our cutting tables offer an effective solution for air purification and dust extraction during the cutting process. They are available in different designs to meet the requirements of different cutting applications. Extraction systems Our extraction systems are specially designed for plasma, oxyacetylene and laser cutting. They offer high filtration performance and help improve air quality and reduce maintenance costs.

longitudinal welding with overlap pipe for transporting air and dust. TRANSQuick system is made of galvanised steel sheet, 0.7 and 0.9 mm in thickness. Depending on the wall thickness there are available various lengths 0.7 mm thickness L=500 / 1000 / 1480 mm. 0.9 mm thickness L=500 / 1000 mm

Module vertical bag filters constitute a line of traditional de-dusting units with bags attached in a vertical system. They are intended to extract dry dust from gases in all industry sectors. They are characterized by ability to purify great quantities of gases. BENEFITS •An advanced way gases are entered ensures their uniform flow into all of the bags. •Downstream direction of certain quantity of gases supports falling of the dusts in the filter's chamber. •Both-side filtrating bags positioning and preventing them from their displacement eliminates effect of mechanical wear in case ends of bags contact each other. It is very important in case of long bags. •Modern regeneration system - Twin-jet enables applying of purified gas originating from the filter clean chamber to carry out this process. In this way efficiency of regeneration grows up and, at the same time, compressed air consumption goes down.

The driving unit of the type 20-101-105 is a traction device designed to push or pull transportation trains on overhead monorails with the cross-section profiles of I-155, I140E or 140V. Typical applications include traction of energy trains with electric equipment, dust extraction appliances, cooling systems, etc. that are moved in pace with the coal face advance. The unit can be operated on running monorails made up of rails with the maximum longitudinal load to rail joints of 60 kN. The driving unit are installed in underground mines, in methane and non-methane areas.

According to the FAO, 20% of the grain harvested in the world is lost due to the proliferation of fungi and insects, which is why within our product range we offer systems for correct grain conditioning, which guarantees a quality product without losses. We offer the following conditioning systems: Cleaning systems To remove dust, debris, stones, organic material, metals and any element other than the grain to be stored, resulting in a clean product that will maintain its quality over time. Grain cleaning equipment we offer: Pneumatic pre-cleaner with rotary disc up to 80 t/h Pneumatic Pre-cleaner with internal inverted cone up to 320 t/h Screen precleaner up to 320 t/h Dust extraction systems throughout the process (depending on the installation). Drying systems The grain coming from the harvest has a high degree of humidity, so – once clean – it must undergo a drying process before being stored to prevent fungal proliferation or the germination of grains.

The Double station CNC Panel Working Machinery specialized for machining aluminium composite panels. Also called in the market as ACP panels or ACM panels. The machine first grooves and then cuts the aluminium composite panels by using cutter bits using 2 high speed spindle motors, clamps the panels by vacuuming with a vacuum table and vacuuming pump, extracts the swarf coming out from the panel by a dust extraction system. Thanks to the double station working system, it is possible to load 2 different panels with lengths up to 3.200 mm each and while the machine is processing one of the panels, it is possible to load and offload the other panel in the other station. This machine has a 50% increased capacity compared to the single station machines. All axes are moving on linear guides and moved by servo motors with reducers controlled by a real CNC controller.

The CNC Panel Working Machinery specialized for machining aluminium composite panels. Also called in the market as ACP panels or ACM panels. The machine first grooves and then cuts the aluminium composite panels by using cutter bits using 2 high speed spindle motors, clamps the panels by vacuuming with a vaccum table and vacuuming pump, extracts the swarf coming out from the panel by a dust extraction system. All axes are moving on linear guides and moved by servo motors with reducers controlled by a real CNC controller. The machine can process light alloy materials such as: aluminium composite panels, HPL, aluminium panels up to 20 mm of wall thickness, bakelite, copper, acrylic, plexi-glass and etc. The machine has a very technologic vacuuming table made from plastic. The user does not need to isolate the table with gaskets like in the old system. The vacuuming is isolated inside the vacuuming system under the table and has a very high clamping force.

High precision CNC cutting machine designed to be a reliable, cost effective machine in streamline appearance for high performance cutting requirements. 1.Advanced CNC controller - high performance control system 2.High accuracy - ±0.1mm 3.High bevel speed 4.Precision linear way - with copper cover for durable lifetime 5.Rigid structure, strong and precision grinding I-rail. 6.Automatic torch height control 7.Durable sealed cable chain for X & Y axes with better protection 8.Applied industries - offshore wind power, steel structure industry, metal processing industry, etc. OPTION : 1.Oxyfuel cutting torch 2.Tube cutting 3.Total cutting solution, includes: -Track foundation (H beam) -Fume extraction table -Dust collector 4.Nesting Software 5.Center drill device 6.LED lamp 7.Anti-spatter spray device *CE Conformity