Results for
KAUP GMBH & CO KG
Germany
The extensive and many-sided drum clamp programme of KAUP encloses attachments which clamp, tip and turn single drums. Other attachments can carry up to four drums pre and side by side. The wide port folio is complemented by special solutions for the transport of special drums, by slip-on drum arms and drum tipping arms for already existing fork clamps.
Request for a quoteTECNORULLI S.R.L. CON SOCIO UNICO
Italy
Drums are used in belt conveyors for the handling of bulk materials, with predominant functions of activating (control drums) and tensioning (idler drums) the rubber matting. In the most challenging handling systems such as large mining or port complexes, etc., where hourly flow rates and speeds are high and the distances or differences in altitude to be reached or gained are considerable, they are further distinguished depending on the specific application: contrast drums; deviator drums; tensioning drums.
Request for a quoteRHODIUS ABRASIVES GMBH
Germany
Non-woven cleaning drum, for use on satin finishing machines for the removal of paints and rust. • Open structure, thus no clogging • High grain concentration for great cleaning performance • Manufactured from rings, therefore markedly longer lifetime
RHODIUS ABRASIVES GMBH
Germany
Drum, for use with satin finishing machines. Fill: combination of abrasive cloth and non-woven material. • Strong material abrasion with simultaneous surface finish • Long lifetime through high-density fill • Open structure, thus less clogging
RHODIUS ABRASIVES GMBH
Germany
Non-woven disc drum, for use with satin finishing machines. • Consistent finishing • Long lifetime through high-density fill • Open structure, thus less clogging
RHODIUS ABRASIVES GMBH
Germany
Abrasive flap drum, for use with satin finishing machines. • Long lifetime through high-density fill • BW with slotted flaps for optimal workpiece adaptation
RHODIUS ABRASIVES GMBH
Germany
Felt flap drum, for use with satin finishing machines. • High-quality wool felt • Long lifetime through high-density fill • FBW with slotted flaps for optimal workpiece adaptation
OSMAK RULO MAKINA SAN. VE LTD.STI
Turkey
Tension/ Tail Pulley used as support to the Drive Pulley. The band is attached to the end of the strap and connected to the drum shaft with tension pulley system. Detachable shaft and conic clamp system used for Osmak conveyor belts. Please contact us to place your order.
Request for a quoteLANDA SAS
France
Discover our range of Drums and Paddles and many other forage harvester parts on www.landa-partscenter.com. Landa offers a range of agricultural parts for forage harvesters, combine harvesters, balers, mower-conditioners, windrowers and tedders. We develop wear parts for harvesting machines that are equivalent to original manufacturer parts, in partnership with industrial companies specialising in the fields of metallurgy (assembly, machining, forming). Our range of spare parts is multi-brand: CLAAS, JOHN DEERE, NEW HOLLAND, KHUN, KRONE, FENDT etc. We work with well-known brands such as: GATES, OPTIBELT, NSK, NTN, TIMKEN, SCHAEFFLER, IWIS, DIAMOND, DONALSON, FLEETGUARD, MANN FILTER, SCHUMACHER, etc.
Request for a quoteLANDA SAS
France
Discover our range of Drum and many other forage harvester parts on www.landa-partscenter.com. Landa offers a range of agricultural parts for forage harvesters, combine harvesters, balers, mower-conditioners, windrowers and tedders. We develop wear parts for harvesting machines that are equivalent to original manufacturer parts, in partnership with industrial companies specialising in the fields of metallurgy (assembly, machining, forming). Our range of spare parts is multi-brand: CLAAS, JOHN DEERE, NEW HOLLAND, KHUN, KRONE, FENDT etc. We work with well-known brands such as: GATES, OPTIBELT, NSK, NTN, TIMKEN, SCHAEFFLER, IWIS, DIAMOND, DONALSON, FLEETGUARD, MANN FILTER, SCHUMACHER, etc.
Request for a quoteLANDA SAS
France
Discover our range of Drum coupling and many other forage harvester parts on www.landa-partscenter.com. Landa offers a range of agricultural parts for forage harvesters, combine harvesters, balers, mower-conditioners, windrowers and tedders. We develop wear parts for harvesting machines that are equivalent to original manufacturer parts, in partnership with industrial companies specialising in the fields of metallurgy (assembly, machining, forming). Our range of spare parts is multi-brand: CLAAS, JOHN DEERE, NEW HOLLAND, KHUN, KRONE, FENDT etc. We work with well-known brands such as: GATES, OPTIBELT, NSK, NTN, TIMKEN, SCHAEFFLER, IWIS, DIAMOND, DONALSON, FLEETGUARD, MANN FILTER, SCHUMACHER, etc.
Request for a quoteLANDA SAS
France
Discover our range of Drum Cover and many other forage harvester parts on www.landa-partscenter.com. Landa offers a range of agricultural parts for forage harvesters, combine harvesters, balers, mower-conditioners, windrowers and tedders. We develop wear parts for harvesting machines that are equivalent to original manufacturer parts, in partnership with industrial companies specialising in the fields of metallurgy (assembly, machining, forming). Our range of spare parts is multi-brand: CLAAS, JOHN DEERE, NEW HOLLAND, KHUN, KRONE, FENDT etc. We work with well-known brands such as: GATES, OPTIBELT, NSK, NTN, TIMKEN, SCHAEFFLER, IWIS, DIAMOND, DONALSON, FLEETGUARD, MANN FILTER, SCHUMACHER, etc.
Request for a quoteLANDA SAS
France
Discover our range of Drum Bottoms and many other forage harvester parts on www.landa-partscenter.com. Landa offers a range of agricultural parts for forage harvesters, combine harvesters, balers, mower-conditioners, windrowers and tedders. We develop wear parts for harvesting machines that are equivalent to original manufacturer parts, in partnership with industrial companies specialising in the fields of metallurgy (assembly, machining, forming). Our range of spare parts is multi-brand: CLAAS, JOHN DEERE, NEW HOLLAND, KHUN, KRONE, FENDT etc. We work with well-known brands such as: GATES, OPTIBELT, NSK, NTN, TIMKEN, SCHAEFFLER, IWIS, DIAMOND, DONALSON, FLEETGUARD, MANN FILTER, SCHUMACHER, etc.
Request for a quoteROBINSON CO.
Turkey
This machine is used in flour mills to separate the stuck core particles in the product coming from the roll. In this way, in flour production; Soft separation does not spoil the product. Both floor and ceiling hanging position shape, Right and left directions of spinner bars, Low power requirement, Coupling or pulley connection system Application Fields ◾ At flour mills ◾ At coarse and fine semolina passages ◾ After roller mills or before plansifter inlet
Request for a quoteFERPLAST SNC
Italy
HYDRAULIC DRUMS TILTER MOD. DA-FP 45 for metal or plastic drums. The new drums-tilter mod. DA-FP 45 is equipped with hook and safety band and is suitable for lifting, transporting, emptying both 210 liter metal and plastic drums. Equipped with hydraulic system with pedal or rudder drive, push handles, angular transmission with practical handwheel for drum rotation, hook and safety band to lock the drum, nylon wheels with high smoothness and brake. The lifter can also be used as a stacker for stacking or for positioning the drums on shelves with a maximum height of 1500 mm. The rotation also allows the drum to be placed horizontally at a height of 1650 mm from the ground. RAL 1028 yellow painting. Attention: the drum turner is suitable for handling metal drums or plastic drums with rim (as in the photo). Do not use for different drums.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
FERPLAST SNC
Italy
PLASTIC CLOSETS FOR DRUMS - LOCKABLE Polyethylene closets with collection tank for storing 2 or 4 200 liter drums containing dangerous liquids. Resistant to most acids, bases and oils and resistant to rust, allows safe storage and prevents spills of dangerous liquids in groundwater. The support pallet for the drums is included inside. Equipped with padlockable lever closure, opening handles, 4 ventilation grids and internal document holder. Standard color green.
Request for a quoteLUTZ PUMPEN GMBH
Germany
Drum pump is suitable for corrosive, aqueous to slightly viscous media. Perfectly suited for the withdrawal or decanting of caustic solutions. * Media examples: Sodium hydroxide, potassium hydroxide, ammonia water, formic acid and acetic acid, etc. * Pumping unit equipped with Lutz Original handwheel * suitable for filling or transferring oils such as rapeseed oil and vegetable oil Features & Advantages * optionally with electric or compressed air drive * no lubricants and therefore no contamination of the pumped medium by lubricants * optimized barrel emptying * universally resistant PTFE shaft bearings * Maintenance without special tools * Seal modules of the seal-less (DL) pump can be replaced
Request for a quoteFERPLAST SNC
Italy
Drum clamp to be installed on the forks of the forklift. The clamp is made of a sturdy steel frame and fork mounted with a forklift, the locking is ensured by two screws and a chain with safety catch that prevents the clamp from sliding off the forks. The coupling and release system of the drum is automatic and the operator must not get off the forklift. It is sufficient to bring the clamp close to the drum and lift. Closing of the clamp is favored by the weight of the drum; to unhook it, simply place the drum on the floor. The clamp cannot be used to handle empty drums. The clamp is suitable for 210 lt metal drums with a diameter of about mm. 580. The pliers can also lift plastic drums with edges but only of the type that can be seen in the picture.
Request for a quoteFERPLAST SNC
Italy
Trolleys FP with hook fastening barrel and fork holding. FP Trolleys are available in three different models. - Model FP15 - Model with two solid rubber wheels 200mm - Model FP79 - to 300-liter barrels. Model with 3 wheels cushion 260 mm - Model FP36 tippers - Model with 4 solid rubber wheels. FP 15 - CART FOR DRUMS WITH 2 WHEELS Trolley FOR drums FP 15, equipped with a hook fastening for barrel and fork holding.Complies with CE standards.
Request for a quoteFLUX-GERÄTE GMBH
Germany
The VISCOFLUX mobile S drum emptying system was specifically designed for use in pharmaceutical, food and cosmetics industries. It is perfectly suited for ensuring efficiency and process safety while pumping high viscosity, paste-like, non-self-flowing media out of diverse drums – either with or without aseptic bags. Media can be transferred low-shear and continously. The residual amount remaining in the drum is up to less than 1 %. The mobile drum emptying system offers a high degree of flexibility and can also be operated in wet or damp production environments. The system's stainless steel process device bears the protection class IP 66.
Request for a quoteFRIEDR. FREEK GMBH
Germany
The HISDpro - Side Drum Heater is a simple yet effective silicone insulated drum heater for the heating of barrels up to 90°C. The Silicone heating jacket is available in four standard sizes (25 / 50 / 105 / 200 liters) and can be manufactured to customer specifications as well. HISDpro heater jackets are particularly suited to melt soaps, fats, varnishes and oil-based products, or respectively reduce their viscosity. The 200-liter element can be combined with the HBD - base drum heater to reduce the heat-up time. These heater jackets are not only used on drums but also containers and any kind of glass-fibre reinforced plastics. They can be produced with any number of belts, e.g. to enable them to be clamped on to rotor blades.
Request for a quoteFRIEDR. FREEK GMBH
Germany
The HTSD-High Temperature Drum Heater is our high temperature drum heater (220 °C) and exclusively suitable for steel drums. The heating jacket is used in areas where large surfaces need heating over 90 °C. This barrel heater is available in four standard sizes (25 / 50 / 105 / 200 liters) and can be manufactured to customer specifications as well. HISD heater jackets are particularly suited to melt soaps, fats, varnishes and oil-based products, or respectively reduce their viscosity. The 200-liter element can be combined with the HBD - base drum heater to reduce the heat-up time. The heating element of the HTSD heating jackets is sewn into a fleece made of silicone-insulated fibreglass material. The insulating outer housing consists of a binder-free mat made of textile glass. The heating element is therefore double insulated (protection class II). An optimal contact with the barrel, as well as a quick assembly and dismantling are achieved by the use of quick release buckles.
Request for a quoteSHANGHAI NPACK AUTOMATION EQUIPMENT CO., LTD.
China
The NPACK drum liquid weighing filling machine is a piece of packaging equipment used to weigh and fill liquids into 100L to 300L drums. A weighing platform (weighing system), a filling nozzle or several filling nozzles, a control panel, and a roller conveyor system comprise the majority of the equipment. The weighing platform measures the weight of the drum before and after filling to ensure that the correct amount of liquid is filled. The filling nozzle is used to transport liquid by gravity or pump from a storage tank or container to the drum. The operator can set and monitor the required weight of the filled drum, as well as regulate the filling process, using the control panel. The conveyor system is used to move the drums to and from the filling station. Main Applicaton fields: Oil Solvent such as thinner Liquid sugar Cooking oil and resin Resin Food and beverage such as soy sauce Paint and varnish Other liquid chemicals
Request for a quoteLUTZ PUMPEN GMBH
Germany
The B2 Battery Drum pump is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister or hobbocks. The pump is flexible at all times and thus saves important resources. *Optional impeller or rotor shape * Battery life 35 min at maximum speed * 1 battery charge emptied approx. 12 x 200 litre container Features & Advantages * BLDC Motor with high efficiency of up to 70% * continuously adjustable * long battery life * automatic shutdown on overload * sophisticated quick lock * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump.
Request for a quoteLUTZ PUMPEN GMBH
Germany
The Drum pump is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister, hobbocks and drums. The pump is flexible at all times and thus saves important resources. * Infinitely variable speed controller for the transfer and filling of small quantities * Sealless design (DL) conditionally safe to run dry * continuously adjustable * powerful Motor with improved service life * service-friendly and easy to dismantle * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump.The max. delivery head also depends on the pump design, motor and fluid.
Request for a quoteFERPLAST SNC
Italy
FPHK 285-C - DRUMS TILTER FOR FORKLIFTERS The FPHK 285-C tilter has a fork-mounted structure and is suitable for lifting and emptying metal drums from lt. 200 with diameter mm. 580-600. The device is complete with a band for locking the drum, a frontal safety rod and an angular transmission with a handwheel for rotation. The tilter can also lift plastic drums with edges but only of the type that can be seen in the picture.
Request for a quoteFERPLAST SNC
Italy
PLIERS FOR DRUMS MOD. DL FP 350 The clamp DL 350 for drums used to lift quickly and safely metal drums Lt. 200 and diameter mm. 600 and maximum weight of 350 kg. The pantograph structure for weight effect applied closes blocking with a strong grip on the drum board. The pliers can be attached directly to a crane or you can attach to the forks of a forklift truck using appropriate lifting straps (not supplied). If you use a forklift we recommend pairing with forks hook MKFP 1000.
Request for a quoteResults for
Drums - Import exportNumber of results
414 ProductsCountries
Company type
Category