Drill bits - Import export

PDC drill bit manufacturer for grouting, mining or oilfield.

The MOTOSHTORM bit is designed for easy ice drilling with a motor engine in any weather conditions. Due to the exact attack angle of blades, drilling is extremely fast. Reliable polymer coating withstands temperature fluctuations and heavy mechanical loads. Polymer powder coating is applied using European hightech equipment. The bit can be attached to a screwdriver or a motor engine. To connect the bit to the motordrill shaft, you must use a screw, a washer, and a nut, which are installed using the keys included in the kit. When attaching the bit to a screwdriver, an adapter (sold separately) and a wing screw (included) are required. If the ice is more than one meter thick, then an extension (sold separately) must be installed on the bit, which will increase the drilling depth by 2540 cm.

Iceberg is a seamless bit with classical clockwise rotation, which can be attached to a screwdriver, a motor engine, or a handle and is designed for easy ice drilling. The upper part of the bit has a “warm” antislip casing for its comfortable transportation. The removable head is made of durable composite material that withstands great loads and guarantees a constant cutting angle of the blades. Highquality steel semicircular blades are suitable for all types of ice and provide easy drilling. It is recommended to apply ICEBERG 130R blades for Wet Ice to avoid slippage while drilling when using ICEBERG bits with a screwdriver, a motor, or an engine. To connect the drill to a powerengine shaft, a wing screw is used (included in the kit). The engine can be attached either directly to the bit or through an extension. An adapter is required to attach the bit to the screwdriver. To increase the drilling depth, it is possible to add a telescopic extension.

Mercel supplies a complete range of drill bits for all well-known manufacturers of drill bits for paper. We also grind the drill bits. The drills bits that we offer are the best on the market in proportion to the cost-effective ratio. They are used by the largest printers and processors. Ensure the regular lubrication of the drill bits, which will thereby extend their life and reduce grinding frequency. Wax papers are used for routine lubrication when drilling.

We produse drill bits with PCD and TC blades for rotary drilling, which are used for exploration drilling, anchor holes, degassing holes, special drilling applications and blast holes. While designing our bits, we always consider type of ground to be drilled, requested diameter, flushing requirements and media as well as connection to drill rods and tubes. We are extremely flexible with our design and production, being able to respond very quickly to all customer requests for special shapes of bit bodies, geometry and lay-out of cutting blades, number and sizes of flushing holes and many more.

For wet and dry drilling of tiles and ceramics, Tyrolit offers vacuum-brazed diamond tile drills that guarantee maximum drilling comfort and clean results. Our products enable precise drilling without edge chipping, even with hard materials. Wet drilling: Specially developed for ceramic tiles, porcelain stoneware and marble slabs, these drill bits ensure precise results thanks to optimum wetting of the diamonds with water. Dry drilling: Tile drill bits with paraffin filling offer excellent cooling and clean working. Drill bit sets: Tyrolit offers drill bit sets for tiles that contain everything you need for wet and dry drilling, including accessories such as a water bottle, drilling aid and tools.

Plastic drill cassettes for drill bit sets (HSS drill sets DIN 338, machine tap sets DIN 371/376 etc.) Four parts: cover, base, insert and safety pin Sturdy and modern design with ergonomic body design Clear cover allows for product visibility

High-quality plastic cassettes in modern design. Ideal for all kinds of drill bit sets, precision tools, shank tools, special tool sets and spare parts Modular concept – cassettes can be combined with individual foam inserts or vacuum formed inserts Intergral secure locking mechanism to prevent unintended opening on impact Adjustable and flexible length stop for tools

Our drill bits for tire mold cleaning are high speed steel cobalt (Hss/Co) and have undergone a special heating process that makes them specifically suitable for the drilling and cleaning of vent holes in both steel and aluminium tire molds. Diameter range: 0.4 mm – 3.0 mm (for side walls drilling and agro tire molds); Helix range: 10 mm – 350 mm (tire mold deep drilling); Length range: 40 mm – 400 mm (extra long drills); Standard or Parabolic helix geometry.

EWS quality now available for Swiss-type lathes. This new development in driven tools is EWS's response to many customers' requests. The tool systems may appear straightforward at first sight, but their simplicity belies their performance. The design concentrates on the mounting and the spindle concentricity. The requirement profile was developed jointly with an American medical technology company which uses very small drill bits and requires extreme concentricity properties. The spindle bearing technology used with labyrinth seals sets new standards in this field, and is associated with a long service life. Provision has already been made for service. The service centres in Germany, China, Korea and the USA have already been trained in the system and are ready to respond without delay. Third-party brands can also be serviced there at any time. Download catalogue: PDF

Tungsten Bars for end mills, drill bits

Ergonomically optimized plastic assortment box with removable inserts. Ideal for drills, screws and small parts High transparency lid offers optimum visibility to contents User-friendly, easy grasp features on both sides 90° swiveling, retractable handle; additional safety lock prevents accidental opening

Thanks to decades of experience and innovation, the Tyrolit range includes drill bits, including TGD® technology diamond wet drill bits, which fulfil almost all construction requirements. Especially in combination with Tyrolit drill motors, they offer reliable and clean results. Tyrolit fulfils the expectations of construction professionals with durable wet core bits for precise core drilling in various dimensions. — For reinforced concrete, steel, masonry, brick, sand-lime brick, fireclay brick, asphalt and special applications — Holders and connection threads in accordance with local standards for all motor types — Perfect system solutions with Tyrolit drill motors and drill rigs — Special dimensions and customised solutions on request Tyrolit offers vacuum-brazed diamond tile drills for wet and dry drilling (with paraffin), which enable precise drilling without edge chipping in tiles, porcelain stoneware and marble slabs.

Ø 17mm Suitable for: SDS - hammer drills We would be very pleased to support you with all your individual questions and suggestions regarding WUS. Give us a ring or leave a message indicating the information you need. We will contact you as quickly as possible. Your WUS team

The straightening machine RM-1000 was developed for straightening deep-hole drills, as 4- and 6-axis version. The radial run-out of a drill is straightened using the 4-axis version. The 6-axis machine additionally corrects the camber of the shank and the head run-out of the soldered carbide drill bits. The maximum length of the drills is 1,000mm, the accuracy of the straightening process is 0.08 mm (depending on the work piece). An exportable straightening protocol is created for each straightening process. A robot cell is available as an option. Using this robot cell, the insertion and removal of the drills is performed. The robot cell is mobile and can be disconnected at any time in order to allow manual straightening processes.

New construction patented DE 20 2010 006 420*height adjustment by hand or cordless drill: precise,secure, quick*mobile and network-independent operation*integrated safety clutch*stainless steel plates*shear resistant pattern*top plate with Ø 10 mm hole*slip-proof rubber feet*suitable 1/4" bit for cordless drill included in delivery

New construction patented DE 20 2010 006 420*height adjustment by hand or cordless drill: precise,secure, quick*mobile and network-independent operation*integrated safety clutch*stainless steel plates*shear resistant pattern*top plate with Ø 10 mm hole*slip-proof rubber feet*suitable 1/4" bit for cordless drill included in delivery

Bossong anchors are embedded into boreholes made in the masonry to be strengthened through drilling machines with diamond bits, that work only with rotation movement in order to avoid vibration and percussion effects on the masonry. Depending on the type of masonry and on the particular setting of the site drilling works can be done with water or air cooling or with techniques that help to avoid the spread of cooling liquids. The choice of the drilling technique is decisive when works are done in unique and precious settings where painting, ancient plasters and stuccoes are present and have to be saved and preserved. The borehole diameter is designed according to anchors size it is usually about three times the steel bar diameter; the length of the anchor is another parameter to be evaluated for the right choice of the borehole diameter.

Driva dowel, plastic / metal with a drill bit The main purpose is installation in a plasterboard wall. With a drill bit, it is screwed in without pre-drilling. The design of the dowel prevents its spontaneous unscrewing and ensures fastening without straining. After installation , the material is attached to it with a screw. If necessary, it can be turned out of the wall.

Self-tapping screw with a drill bit for connecting metal profiles DINEN-ISO 15480 standard (old - DIN 7504-K) Head: hexagonal with a shoulder, , turnkey 8 (4.8 x and 5.5x) or 10 (6.3x) mm, a marking mark in the form of the letter "X" is stamped on the cap

Materials used in Mining and Drilling are subject to some of the harshest environmental conditions in the world. We’re committed to manufacturing durable, high strength and corrosion resistant Spinodal products for vital drilling and downhole components. Unrivaled Resistance to The Harshest Environments Our Spinodal alloys are highly specialized and possess excellent corrosion resistance. They benefit from age hardening techniques that further increase their strength and hardness while offering superior mechanical and physical properties for demanding applications including: Pfinodal® (C72900) Drill Bit Material for Bearing Components such as Sleeves, Bushings, Washers and Caps Pfinodal® (C72900) and AM-388™ (UNS C72650) Shaped Charge Liner Material for Wall Perforation Pfinodal ® (C72900) Bar and Tube for Downhole Housings, Centralizers, Joints

Our sophisticated powder metallurgy process allows us to manufacture shaped components including net shapes, bar, plate, rod and tube. These custom-made components are used for critical applications in the mining and drilling, aerospace, electronics and industrial sectors. Pfinodal® (UNS C72900) We offer Pfinodal® (UNS C72900) as a replacement for Toughmet® UNS C72900 material and Beryllium Copper Alloys. AMETEK Specialty Metal Products obtained patents for its powder metallurgically produced product in 1983 and has been serving customers worldwide ever since. Key advantages include: High hardness and strength Non-magnetic properties required in bearing material Low distortion during hardening allows for the complex forming of parts and shapes prior to heat treatment without the need for costly fixtures Non-sparking and non-corrosive Anti-Galling Anti-Seizing Excellent Ductility Excellent Formability Excellent Lubricity Excellent Machinability

AMETEK Specialty Metal Products has led the industry in the production of Pfinodal® (C72900), a highly specialized Spinodal alloy, with superior bearing properties. Our production processes and heat treatments combine to ensure the high hardness required in tough drill bit material for bearing components such as sleeves, bushings, washers and caps. Our Pfinodal® (C72900) bearing materials has been in use for 20 years under patent numbers 5527113 and 5552106 for these rock bit bearing applications. Advantages The near-net shape processing of our Spinodal materials eliminates waste thereby reducing cost for the finished product. We specialize in offering the turnkey solutions of materials that are machined, plated and packaged to your specifications. These can be shipped to your facilities around the world for incorporation in the bits, reamers and equipment needed to power the world.

The semicircular shape of Helios blades ensures easy and smooth drilling with minimal effort. Due to the 5762 HRC hardness, the blades can be resharpened many times without losing their original properties. Advantages of our blades • The blades are manufactured on the hightech Italian grinding equipment MVM “La 500”; • Due to the finishing grinding operation, the blades are perfectly sharp and keep sharpening for a long time; • The blades are treated with the special protective compound. To be used with • HS, Buran, Tornado ice augers; • Motoshtorm auger drill bits

PRODUCT INFORMATION Portable Hingle Slot Milling Machine GENERAL FEATURES • Hingle slot milling operation • Adjustable hinge slot depth • Opens holes for screwing the hinges STANDARD ACCESSORIES • 1 x cutter unit included • 2 x drill bits included • 2 x setquares • 2 x vertical clamps OPTIONAL ACCESSORIES • Machine stand TECHNICAL SPECIFICATIONS 800W 230V 50Hz 3000 RPM 52x52x50 15 Kg 14 Kg

Consisting of MINI-systainer® incl. EPP cover insert and 6-compartment deep-drawn tray Interior dimensions of compartment: L 73 x W 67 x D 42 mm Suitable for sorting small components in the MINI-systainer®, such as saw blades, drill bits, etc. systainer® material: ABS Cover insert material: EPP moulded foam Deep-drawn tray material: recycled PS

Consisting of MINI-systainer® T-Loc I incl. EPP cover insert and 3-compartment deep-drawn tray Interior dimensions of compartment: L 229 x W 42 x D 42 mm Suitable for sorting small components in the systainer®, such as saw blades, drill bits, etc. systainer® material: ABS Cover insert material: EPP moulded foam Deep-drawn tray material: recycled PS With lid insert, EPP and insert with 3 divisions