Drafting - Import export

Pprofiles are used as a bumper, sealing and finishing. Good fixation possibility due to strip on flat part of profile Different hardnesses and colors possible Perfect as a draft strip for windows and doors

Material:Hot dip-galvanized Steel Pipe or oval Tube Finish:Galvanized or Powder coating Height × Length:2200mm × 2500mm Vertical Pipe (Oval Pipe): 40mm*40mm*1.6/1.8/2.0mm Thickness 50mm*50mm*1.6/1.8/2.0mm Thickness 30mm*60mm*1.6/1.8/2.0mm Thickness 40mm*80mm*1.6/1.8/2.0mm Thickness Horizontal Rails (Square Tube): 30mm*30mm*1.6/1.8/2.0mm Thickness 40mm*40mm*1.6/1.8/2.0mm Thickness 50mm*50mm*1.6/1.8/2.0mm Thickness Length:All sizes can be customized Height:All sizes can be customized Welding:Fully welded post brackets. Welds:Bull bars are fully welded.

This Burner design is for use in forced draft or natural draft vertical combustors and thermal oxidisers and has a high turn-down capability. The venturi flame holder ensures that the flame remains stable under varying load conditions. The flame holder design ensures a stable gas flow around the flame and also controls the split between combustion air and cooling air in the vicinity of the burner head. EUROPEM Natural Draft and Forced Draft Burners A robust, low pressure drop burner design, used for burning waste gas and/or gaseous fuel in vertical combustors and thermal oxidisers. Can be installed as a single burner or used in a system as a central burner with additional satellite burners.

Agathor’s goal is to prevent any problem that is likely to occur between employees and employers. Our team advises variety of companies, on various employment issues throughout the world. We provide advisory services in relation to the preparation, negotiations and termination of any kind of employment agreement including the key employees’ employment agreements. Our firm also has a solid experience in the collective dismissal processes, termination of employment agreements via mutual agreement and the reorganization of the workplaces. Furthermore, our firm provides legal support to our clients in the preparation of internal employment regulations and guidelines. We advise employers regarding employment related rights, fringe benefits, fulfillment of procedural requirement on contractual and statutory matters.

Our lawyer team constantly deal with commercial transactions, advice on all aspects of commercial law including agreements, government relations, proceedings and liabilities. One of our crucial duty is to assure that our clients minimize their risk and their interests are secured. Most of our clients are stock companies, partnerships, limited liability corporations and more. Services provided with regards to Commercial law are: Capital increase and reduction Sale and Purchase Drafting and negotiating complex distribution agreements Agency agreements and franchise agreements Negotiating and drafting stages of business consulting Restructuring and maintenance of cross-border commercial activities Agency contracts Management consulting and service contracts Warranty certificates and Regulations on after-sales services.

The induced draft cooling tower generally offers the most effective and economical solution to most of cooling needs. Hamon has supplied numerous IDCT worldwide for all power and industry applications and all environmental conditions. The IDCT offers the following advantages:flexibility. cost effectiveness. air flow almost constant regardless ambient air temperature. adapted to any water flow .flexible operation by shutting some cells. adapted to high thermal performance .all types of structure – wood, FRP, concrete, steel. all types of heat exchange surfaces from splash grids to high performance film

The natural draft cooling tower is the right choice for large power plants.It offers the following advantages :power saving (no power consumption to induce air flow- no fan).environmentally friendly.no mechanical noise (no fan).safety of operation.no recirculation as the plume is rejected at high level.limited plot area.limited maintenance.high longevity (generally more than plant life expectancy).Payback period between 8 and 16 years depending on several factors.Hamon offers both basin or water collecting devices. This last solution, developed by Hamon, is recommended for large cooling towers.It offers the following advantages :less pressure drop in the air inlet.reduction of pumping power.decrease of acoustic pressure in air inlet

The cooling tower with plume abatement (also called hybrid or wet/dry) is an evaporative cooling tower combined with a dry heat exchanger, used to abate the cooling tower plume. This is the best available solution where local constraints are such that the presence of plume is not accepted in normal conditions (along motorways, airports, close to residential areas).Hamon has an unrivaled reference list in this field.Plume abatement can be offered with mechanical draft cooling tower (cells) as well as with fan assisted natural draft (circular hybrid).ADVANTAGES: no plume visibility. outstanding performance of an evaporative cooling tower. cost attractiveness. all types of heat exchange media. for cell CT :same flexibility as an induced draft cooling tower. all types of structure (wood – frp – concrete – steel)

Plume-abated fan assisted natural draft or circular hybrid cooling tower is the best technical solution for large heat loads and stringent plume abatement requirements.Seawater application. If overall height is limited. To keep countryside free from visible plume formations and shadow .For locations close to residential areas .To facilitate permission processes. ADVANTAGES VS CELL TYPE HYBRID COOLING TOWER: Compact arrangement/space saving. No recirculation and interference effects. No wash down (grounding) effects of plume. Use of natural draft. No corrosion due to humidity and salinity in the neighborhood. Visually an interesting architectural structure.

The fan assisted natural draft cooling tower (FAND) combines the advantages of the natural draft cooling tower and the mechanical draft cooling tower.It becomes the best available technology when :Locations with limited plot plan. Overall height is limited. Important heat load . ADVANTAGES VS. CELLS: Compact arrangement. Power saving due to natural draft. No recirculation. Always a good alignment considering wind directions. Cooling by natural draft in case of electricity shortage.ADVANTAGES VS. NATURAL DRAFT CT: Reduced height. Better cooling characteristics during the summer season. Higher flexibility

The PMKP-110 absorber is a new high-performance shock absorber of increased energy intensity, class T1, to protect multi-purpose freight cars of general purpose from longitudinal loads. The device is developed on the basis of the commercially available draft gear PMK-110K-23, in which, instead of a spring set, a supporting-return device is used, which is a set of polymer elastic blocks. The use of polymer blocks increases the completeness and energy intensity of the shock absorber's power characteristics. This is achieved by increasing the rigidity of the retaining set, which makes it possible to reduce the control angles of the wedge system and, accordingly, to stabilize the friction on the auxiliary surfaces. In combination with the damping properties of polymers, frictional self-oscillations can be eliminated.

A feature of the KMT-118C draft gear is the use of elastic elements of increased reliability and energy intensity in the design of the plate apparatus, as well as the implementation of the apparatus parts from heat-treated steel with bronze inserts. This makes it possible to achieve, firstly, a high energy consumption of the device, and, secondly, to avoid the use of metal-ceramic linings, which increases the reliability and provides the required resource of the structure as a whole. Technical appraisal and economic benefits The strength of the walls of the case is more than 20% higher than that of the known analogs. The deformation of the walls of the body when exposed to excessive impacts is excluded due to the design features of the friction unit and the execution of solid walls in contact with the friction unit (patent). Solid walls provide high strength both under axial shock loads when closing the draft gearbox and under thrust forces from the friction unit.

in plastic contrution axial ventilators induced draft anothers models available