Diodes - Import export

Diode Connector Product description: Insulation material: PPE/PA Rated current(Without Diode): 30A Rated current(With Diode): 10A(Diode Rated Current 15A) Rated voltage: 1000VDC Test voltage: 6kV(50Hz,Imin)  Typical contact resistance: ≤0.25 mΩ Contact material: Copper,Tin plated Degree of protection: IP67 Overvoltage category/Pollution degree: CATIII/2 Safety degree: II Flame class: UL94-V0 Insertion force/Withdrawal force: ≤50N / ≥50N Ambient temperature range: -40℃…+85℃(IEC) Upper limiting temperature: 110℃(IEC) Connecting system: Crimp connection Nut cap locking force: 1.5-1.8Nm

Diodes - Rectifiers - Arrays Products within the diode and rectifier array family incorporate two or more discrete diodes within a single package. They are characterized in terms similar to those used for single discrete diodes, with the addition of a "Diode Configuration" attribute indicating the presence and character of any internal connections between the diodes in the device. Note that arrays with a full-bridge configuration are specifically excluded, and listed as a separate product family.

Yingxinyuan International (Group) Co., Ltd. was established in 2001. It is one of the largest authorized agents and distributors of electronic components in the world. Its headquarter is located in Shenzhen, China, and it has branches and warehouses in Hong Kong and Taiwan. The company distributes and represents more than 700 brand manufacturers, and there are more than 3 million categories of spot products in warehouses all over the country for a long time, and they can be shipped within 24 hours. The products we promise to sell are guaranteed to be brand new, original and authentic products and provide 365-day warranty service. Please contact our sales team or send the model and quantity you need to yingxinyuan@yxsmd.com.

1000VDC PV4.0 Diode Connector Product description: Insulation material: PPE/PA Rated current(Without Diode): 30A Rated current(With Diode): 10A(Diode Rated Current 15A) Rated voltage: 1000VDC Test voltage: 6kV(50Hz,1min)  Typical contact resistance: ≤0.25 mΩ Contact material: Copper,Tin plated Degree of protection: IP67 Overvoltage category/Pollution degree: CATIII/2 Safety degree: II Flame class: UL94-V0 Insertion force/Withdrawal force: ≤50N / ≥50N Ambient temperature range: -40℃…+85℃(IEC) Upper limiting temperature: 110℃(IEC) Connecting system: Crimp connection Nut cap locking force: 1.5-1.8Nm

1000VDC PV4.0 Diode Connector Product description: Insulation material: PPE/PA Rated current(Without Diode): 30A Rated current(With Diode): 10A(Diode Rated Current 15A) Rated voltage: 1000VDC Test voltage: 6kV(50Hz,1min)  Typical contact resistance: ≤0.25 mΩ Contact material: Copper,Tin plated Degree of protection: IP67 Overvoltage category/Pollution degree: CATIII/2 Safety degree: II Flame class: UL94-V0 Insertion force/Withdrawal force: ≤50N / ≥50N Ambient temperature range: -40℃…+85℃(IEC) Upper limiting temperature: 110℃(IEC) Connecting system: Crimp connection Nut cap locking force: 1.5-1.8Nm

1000VDC PV4.0 Diode Connector Product description: Insulation material: PPE/PA Rated current(Without Diode): 30A Rated current(With Diode): 10A(Diode Rated Current 15A) Rated voltage: 1000VDC Test voltage: 6kV(50Hz,1min)  Typical contact resistance: ≤0.25 mΩ Contact material: Copper,Tin plated Degree of protection: IP67 Overvoltage category/Pollution degree: CATIII/2 Safety degree: II Flame class: UL94-V0 Insertion force/Withdrawal force: ≤50N / ≥50N Ambient temperature range: -40℃…+85℃(IEC) Upper limiting temperature: 110℃(IEC) Connecting system: Crimp connection Nut cap locking force: 1.5-1.8Nm

1000VDC PV4.0 Diode Connector Product Description: Insulation material: PPE/PA Rated current(Without Diode): 30A Rated current(With Diode): 10A(Diode Rated Current 15A) Rated voltage: 1000VDC Test voltage: 6kV(50Hz,1min)  Typical contact resistance: ≤0.25 mΩ Contact material: Copper, Tin plated Degree of protection: IP67 Overvoltage category/Pollution degree: CATIII/2 Safety degree: II Flame class: UL94-V0 Insertion force/Withdrawal force: ≤50N / ≥50N Ambient temperature range: -40℃…+85℃(IEC) Upper limiting temperature: 110℃(IEC) Connecting system: Crimp connection Nut cap locking force: 1.5-1.8Nm

Knight Optical We can offer Custom Moulded Aspheric Lenses for use with Laser Diode Collimators. Aspheric lens surfaces are used to correct spherical aberration (where the converging light from a lens does not have a common focal point, resulting in a distorted image) in lasers and imaging. Traditional spherical lenses cannot collimate light effectively because even small angles of incidence can produce spherical aberrations. This can mean that several components may be required to get the desired result. The non-spherical surface of an aspheric lens allows a single component to effectively focus or collimate even highly divergent emissions, potentially replacing a multi-lens system with a single aspheric lens. Therefore Aspheric Lenses that are moulded are ideal for use within laser diode-to-fibre coupling applications. For more information read the PDF..

Knight Optical We can offer Custom Moulded Aspheric Lenses for use with Laser Diode Collimators. Aspheric lens surfaces are used to correct spherical aberration (where the converging light from a lens does not have a common focal point, resulting in a distorted image) in lasers and imaging. Traditional spherical lenses cannot collimate light effectively because even small angles of incidence can produce spherical aberrations. This can mean that several components may be required to get the desired result. The non-spherical surface of an aspheric lens allows a single component to effectively focus or collimate even highly divergent emissions, potentially replacing a multi-lens system with a single aspheric lens. Therefore Aspheric Lenses that are moulded are ideal for use within laser diode-to-fibre coupling applications. For more information read PDF ….

Knight Optical supply custom laser mirrors for use at specific laser lines from the UV (200 to 400nm) to the IR (1to 40µm) wavebands. The laser mirrors can be custom made to include the following range: 1 YAG laser mirrors (High power grade) 2 Excimer laser mirrors (High power grade) 3 Argon-ion laser mirrors (High power grade) 4 Diode & broadband (Ti:Sapphire) These mirrors are made from vacuum depositing thin films of material that have differing refractive indices & thickness onto suitable substrates. Typical custom laser mirror substrates are calcium fluoride, germanium, sapphire, fused silica and Zinc Selenide which produce a high efficiency reflecting surface at the laser wavelength. Read PDF for more information.

The term "diode lines" dates back to the early days of hi-fi technology, when tubes were used in the output stages. Even today it is still used to describe cables for recording and/or playback connections between stereo equipment. Our diode cables with individually shielded wires are suitable for Chinch connections, pickup systems, stereophony and general applications in the LF range. Due to the relatively high-impedance input resistances, low-capacitance supply lines are required to avoid unwanted drop in height. 1- to 8-core constructions, each of which has low-capacitance PE insulation with individual core screening, meet these requirements. Core cross-sections of 0.08 mm² and 0.14 mm² are used.

The term "diode lines" dates back to the early days of hi-fi technology, when tubes were used in the output stages. Even today it is still used to describe cables for recording and/or playback connections between stereo equipment. Our diode cables with individually shielded wires are suitable for Chinch connections, pickup systems, stereophony and general applications in the LF range. Due to the relatively high-impedance input resistances, low-capacitance supply lines are required to avoid unwanted drop in height. 1- to 8-core constructions, each of which has low-capacitance PE insulation with individual core screening, meet these requirements. Core cross-sections of 0.08 mm² and 0.14 mm² are used.

The term "diode lines" dates back to the early days of hi-fi technology, when tubes were used in the output stages. Even today it is still used to describe cables for recording and/or playback connections between stereo equipment. Our diode cables with individually shielded wires are suitable for Chinch connections, pickup systems, stereophony and general applications in the LF range. Due to the relatively high-impedance input resistances, low-capacitance supply lines are required to avoid unwanted drop in height. 1- to 8-core constructions, each of which has low-capacitance PE insulation with individual core screening, meet these requirements. Core cross-sections of 0.08 mm² and 0.14 mm² are used.

Whatever you are in concert,nightclub,stadium. Let us rock and scream with LED flashing by sound control.

LAS 5000XD uses Tunable Diode Laser Spectroscopy (TDLS) and comes in various models for measuring parameters such as NH3 + H2O, HF, CO + CO2, O2, HCl + H2O, etc. It combines robustness, fast response time (1 s) and high accuracy measurement in harsh environments.

Ceramic reflectors supplied by us work particularly well in Ruby and Nd:YAG laser pumping chambers and can be a highly cost effective alternative to metal coated reflectors. They are also used extensively as reflectors in housings for high intensity lamps. > resists chemical attack > has high strength > has a high reflectivity over a broad wavelength band > has good thermal conductivity and > excellent dimensional and electrical stability at all operating temperatures. Specification: - - BAB192 (TCT97, BAB349) - - Material: 99% Alumina - - Specification: Φ31.00xΦ12.00x97.00 - - Application: welding, cutting, marking and in medical lasers (2) Single lamp and single rod - - Ceramic reflector TCT117 used - - Matchable YAG rods: φ(3-7)x140mm or longer - - Matchable lamps: ST256 (maximum OD is 8mm, overall length >270mm.) - - Suitable for 80W to 150W YAG lasers - - Dimension: 260x55x40mm

The test and certification process of the Pergamon series led projector was completed in the first quarter of 2022. The products are manufactured in 4 types as 50W-100W-150W-200W. Case is cast aluminum, impact resistance is increased with 4mm polycarbonate glass. Meanwell driver is used with Samsung led. Ticket ; II 2G Ex eb mb IIC T5 Gb II 2D Ex tb IIIC ( T90' ) Db IP66 document ; IEP 22 ATEX 1061 on sale; It is offered as 1 meter cable, 1 brass-nickel ex-coupling, 1 brass-nickel blind plug and connection apparatus.

The certification period of Troya Series luminaires was completed in September 2020 and hot sales to the market started. The product is designed to be used in zone2-22 areas against gases and dust. Body and cover are 100% polycarbonate. The materials used in the application have non-sparking properties. Protection is provided with a one-piece gasket at the junction of the cover and the body. The connection points of the lamps are made with pins of our own design and manufacture. The lamps, on the other hand, are attached with handles of our own design and manufacture. Thanks to the handles, the desired angle can be given to the led lamps. The product provides protection between -20 and +40 degrees at IP65 Level. Product types ; 1x18W 1x36W 2x18W 2x36W 2x58W Led fluorescent luminaires with one-sided power (with internal driver)

We’ve perfected our knowledge and experience in diode technology with Red Shein Fein. Elegant design and elegant lines appeal to your visual taste while being small and portable allows you to use practical. Thanks to the enhanced security system, safer handling and 3 different wavelengths, you can achieve much more effective hair root destruction. Thanks to Red Shine Fein’s advantageous cost, ergonomic design and 3 different Wavelength technologies, you can increase the prestige of your business with quality service to your customers.

DIODE CARDINAL, Developed by Mormed, offers a visible effect. DIODE CARDINAL, which offers comfortable hair removal with its specially produced extra cooled handpiece, increases customer satisfaction. DIODE CARDINALE has proven technology for fine and thick hairs. The laser beam targets the hair follicle. Thus, it is an ideal system for applying on the cheeks hairs and beards, genital area, arms and legs. By help of DIODE CARDINALE with a wavelength of 808 nm, you can perform effective and comfortable hair removal by minimizing application time.

The Diamond series LED high-temperature bay light is distinguished from ordinary ufo-style high bay lights. It is environmentally friendly, no mercury, no ultraviolet light, energy-saving, high luminous efficiency, long life, dimming, intelligent control, and has a wide range of applications, including retail stores, warehouses, plants, gyms, shops, supermarkets, food processing factory, fresh food shelf, restaurant, workshops, car wash. Using diamond as the standard UFO LED light, its maximum benefit is 150lm/w and 190lm/w to meet the lighting of the plant, warehouse, retail store, gym, and other places. At the same time, the higher the lumen, the higher the brightness, and the total quantity of UFO LED lights in the entire application area will be less. This is undoubtedly saving you money. So what is the designated lighting? First, due to the smooth surface, IP66 & IP69K rating, no exposed screws, no glass material, Diamond LED high bay light can be used for food processing factory

Built with extensive strong aluminum casting materials and reliable components, Melo low profile street light has been defined as a high-performance and cost-effective luminaire. The unique thermal design enables passive heat dissipation to accommodate a different range of power consumption. Easy and tool-less access to the driver compartment brings more convenience of maintenance service.

MODEL NAME VersionTN-PRO-IF 3 PLUS Pixel Pitch3,076mm Pixel ConfigurationSMD2020 LED Space Black Processing - Processing18 Bit Pixel Density / m2105625 Resolution/SQM325 x 325 Cabinet Resolution 640x480208 x 156 Pixel Density / Cabinet32448 Module Size (mm)320x160 Cabinet Size (mm)640 x 480 x 70 Module Per Cabinet6 MODULE Module Resolution128 x 64 Weight Per Panel Net kg. 640x480mm6,5 Rotation per 90 Degree✓ Free Rotation (with R5)✓ Mapping✓ Clear View✓ Low Latency✓ HDR✓ Power Consumption (<w/sqm) 460 Average Power Consumption (<w/sqm)138 Driving Method 1/26 Brightness>1100 Nits Refresh Rate- Refresh Rate High Refresh>3840Hz Refresh QualityBest Quality High Refresh (PLL inside)✓ High Refresh Power Saving✓ High Refresh Dynamic Power Saving✓ Driving IC TypePWM Refrate Quality 24K Refresh Rate No Waterless Ripple of Camera>%90 Cabinet MaterialDie-Casting Aliminum Horizontal Viewing Angle140 (±30) Vertical Viewing Angle 140 (±30)

Light Source:CREE/Lumileds/Bridgelux/Osram/Samsung/Epistar Controller:With MPPT function Power range:20W/30W/40W/50W/60W Voltage:DC12V/DC24V Solar light Charge time:6-8hrs Work time:12 hours per night, 4-5 rainy days CCT:3000K/4000K/5000K/6000K Optical:Type II/Type III/Type IV/Type V Efficacy:130lm/W standard, 150lm/W optional CRI:Ra>80 IP Rating:IP66 IK Rating:IK09 Spigot size:25mm-76mm Temperature:-20℃ to +55℃ Warranty:3Years Smart control:Photosensor, motion sensor, smart city control system Through IoT group management and big data collection, combined with the weather forecast and future lamp usage, as well as the real-time control of lamps by intelligent algorithms, which can significantly improve system utilization efficiency and lighting quality.

Victory LED lamps can be used to replace old-style, inefficient bulbs with new energy efficient technology. These lamps can be retrofitted, ie used in existing bulb holders and fittings. Victory also offers LED replacements for fluorescent tubes. The company also supplies LED strips lighting. If drivers are required, Victory can also supply these. The company also supplies LED highbay lighting for large areas such as factories and warehouses.

Dim-to-warm is a LED lighting which emulates a halogen lamp when dimmed, so when you dim it down (reduce its brightness) the colour temperature changes to a warmer colour. This special LED lighting, despite the classic LED that when dimmed changes only the brightness, changes the colour from 3000K to 1800K. It’s perfect for decorative luminaries, and can be used in hotels, restaurants and residential projects. Perfect to create the right atmosphere when needed, just at a flick of the control unit. How it works? We are used to LED lighting dimming but keeping the same colour rate, just changing the brightness. On the contrary, a dim-to-warm LED lighting is made by two different areas, one with a cooler colour temperature and another with a very warm colour temperature. When dimming the lighting, it will first interact with the cooler area, and once completely dimmed it will start working on the warmer area.