Dedicated software - Import export

The Extrusion Coating EC Thermal Imaging System from Fluke Process Instruments features a variety of linescanning systems that provide continuous, accurate and real-time thermal images and temperature measurements for moving processes and product. Each system comes in a wide choice of spectral and temperatures ranges to accommodate a variety of applications. The series also features dedicated hardware and software options, which have been created specifically for specialized extrusion coating, co-extrusion and laminating processes.The series also features dedicated hardware and software options, which have been created specifically for specialized extrusion coating, co-extrusion and laminating processes. MP Linescanner With scan speeds up to 300Hz and the ability to scan up to 1024 data points in a single scan, the MP Linescanner Series can provide a complete picture of even the highest speed manufacturing processes. Additionally, with a 90° field

Cygnus ROV Mountable ultrasonic thickness gage is depth rated to 500m and designed to operate in the harshest operating conditions, ideally suited for asset integrity inspections and pipeline inspections using ROV. Dedicated software displays and logs thickness measurements from the ROV UTG on to a computer at the surface. The Cygnus Topside Repeater (TSR) is available as an option and has the facility to display the thickness measurements remotely and overlay them on to a video signal. This allows the measurements to be superimposed on the ROV camera’s monitor screen. Supplied with CygLink software to display and log thickness measurements from the ROV wall thickness gauge on a computer at the surface which can be saved to a file and printed out. CygLink has two data logging facilities Quick Log for simple recording of thickness measurements and Structured mode with four templates available Single Point, Multi Point, Grid Point and Key Point.

The MP Linescanner Series from Fluke Process Instruments features a variety of linescanning systems that provide continuous, accurate and real-time thermal images and temperature measurements for moving processes and product. Each system comes in a wide choice of spectral and temperatures ranges to accommodate a variety of applications. The series also features dedicated hardware and software options, which have been created specifically for specialized applications and industrial environments. With scan speeds up to 300Hz and the ability to scan up to 1024 data points in a single scan, the MP Linescanner Series can provide a complete picture of even the highest speed manufacturing processes. Additionally, with a 90° field-of-view and up to 200:1 optics, each spot on the target surface is capable of being sampled up to three times, ensuring an accurate temperature reading. Each linescanner also includes a built-in line laser for rapid

The TF Thermoforming Thermal Imaging System from Fluke Process Instruments features a variety of linescanning systems that provide continuous, accurate and real-time thermal images and temperature measurements for thermoforming processes. Each system comes in a wide choice of spectral and temperatures ranges to accommodate a variety of applications. The series also features dedicated hardware and software options, which have been created specifically for specialized applications and industrial environments. The TF Thermal Imaging System is ideal for applications reaching temperatures from 20 to 350°C (68 to 662°F). MP Linescanner With scan speeds up to 300Hz and the ability to scan up to 1024 data points in a single scan, the MP Linescanner Series can provide a complete picture of even the highest speed manufacturing processes. Additionally, with a 90° field-of-view and up to 200:1 optics, each spot on the target surface is capable

The GS Thermal Imaging System for Glass Processes from Fluke Process Instruments features a variety of linescanning systems that provide continuous, accurate and real-time thermal images and temperature measurements for moving processes and low emissivity glass products. Each system comes in a wide choice of spectral and temperatures ranges to accommodate a variety of applications. The series also features dedicated hardware and software options, which have been created specifically for specialized glass applications – such as glass bending, forming, annealing and tempering – and industrial environments. MP Linescanner With scan speeds up to 300Hz and the ability to scan up to 1024 data points in a single scan, the MP Linescanner Series can provide a complete picture of even the highest speed manufacturing processes. Additionally, with a 90° field-of-view and up to 200:1 optics, each spot on the target surface is capable

The ES Thermal Imaging System for Sheet Extrusion from Fluke Process Instruments features a variety of linescanning systems that provide continuous, accurate and real-time thermal images and temperature measurements for moving processes and product. Each system comes in a wide choice of spectral and temperatures ranges to accommodate a variety of applications. The series also features dedicated hardware and software options, which have been created specifically for specialized applications and industrial environments. The ES Thermal Imaging System is ideal for continuous web applications such as hot strip mills, continuous casting, glass wool production, laminating for both glass and plastics and more. MP Linescanner With scan speeds up to 300Hz and the ability to scan up to 1024 data points in a single scan, the MP Linescanner Series can provide a complete picture of even the highest speed manufacturing processes. Additionally, with a 90° field

CNC polishing of compressor blades and vanes to optimize flow efficiency while at the same time minimizing differences due to tolerances in blade geometry. This is essential to the balancing of the compressor rotor and the fit of the stator parts. The SPE allows to keep up with the demand of this for the latest F-Class & H-Class Gas Turbine Compressors. The SPE CNC-Machine allows automatic polishing of all rows of the Gas Turbine Compressor, as well as most rows of Steam Turbine Blades within tight tolerances and highest repeatability. A dedicated CAD/CAM software allows for generation of NC part programs. As the SPE is a cartesian type machine tool there is no need for referencing or time consuming in process gauging. The precision and repeatability of the process allows the balancing of the milling process to leave a rougher scallop on the blade and save valuable time and cutter on the milling side. Capable of polishing compressor blades, fan blades and vanes up to 550 mm in length.

We provide sheet metal bending services using three precision Trumpf press brakes (TruBend_3100, TruBend_5085; TruBend_5320) with a maximum pressure of 320 tons and a maximum bending length of 4000 mm. Our well-equipped inventory of bending tools enables us to manufacture even the most complex parts, and dedicated software supporting machine operation allows us to simulate the bending process. All this guarantees the execution of orders with extreme precision and accuracy. In addition, in our machine park we have two CNC bending machines for bending pipes and profiles. We operate on both mandrel and mandrelless benders, while specializing in bending pipes and profiles. In our plant we deal with bending of, among other things: - structural steel - galvanized steel - stainless steel - aluminum

Magtrol's new PSD hand-held indicator is a stand-alone unit powered by 3 AA batteries or via USB. It is very compact (~160 x 80 x 50 mm) and can be easily carried and used on a civil engineering site, in a research & development office or laboratory as well as in production shop. Its case is ergonomic, waterproof (IP54) and protected by a rubber shock absorber. It is suitable to any type of strain gauge transducers, being a load cell, a load pin or a reaction torque sensor. The internal amplifier can process signal range of ±0.3 ... 5 mV/V. The new PSD Portable Display is very flexible and complies with the highest specification in terms of accuracy (0.01%) and measurement frequency (1600/s). It allows to store up to 16 programmable measurement ranges which can be configured either directly on the unit or via its USB interface and dedicated software (included). Multiple force or torque transducers can be connected for which actual data as well as the ... read more: www.magtrol.

Sofwares dedicated developped : CYCLONE SOFTWARE : This system associate a programmable automaton, a conduct supervisor and a test sequencer to assure the reliability of the bench test functioning. System spread today on bench test 7P, 5P, 16R, 17R … offering an programming interface identical to all the users. C-BATCH SOFTWARE: Software allowing the creation and the management of the production receipts in the Pharmaceutical domain. Equipments Management : - Receipts creation - Production follow-up and data archiving - Reports edition - Operators accesses management

FTIR Excellence for Industry, R&D and Science: INVENIO INVENIO is the definitive spectroscopic solution for routine FTIR analysis as well as research and development. It is all you need and so much more: innovative technologies, intelligent design and its new beam path contribute to an unrivalled user experience. Your advantage: •Outstanding signal-to-noise ratio •Broad spectral range (FIR, MIR, NIR and VIS/UV) •Touch-PC with dedicated software for enhanced productivity •MultiTect™: Up to seven automated and software controlled internal detectors •Transit™: parallel availability of two experimental setups •RockSolid™: reliable, well-proven and precise •CenterGlow™ IR source: optimized light flux and durability •Bruker FM: MIR and FIR spectra in one go •Upgradability: retrofit spectral range extensions or time resolved measurements •Multiple beam inputs and outputs •Compact footprint optimized for laboratory benches

Multipurpose industrial IR Fourier spectrometers IROS P series are designed for routine analytical measurements in the mid-IR and near-IR region of the spectrum, in particular, qualitative and quantitative analysis of samples of organic and inorganic substances in gaseous, liquid and solid state, including films and powders. IROS P series FTIR spectrometers are based on the Michelson self-compensating interferometer which does not require dynamic adjustment and has the ability to install in the cell compartment a variety of gas and liquid cells, optical attached modules and accessories for liquid, solid and gaseous samples. Main characteristics: - Spectrometers product range with resolution up to 0.12 cm-1 - High sensitivity, rapid response - Automated measurements, easy to use - Wide range of accessories - Application software for dedicated tasks KBr/Ge/CaF2/Ge, optical windows and beamsplitter with moisture-proof coating

Cutting is a process that demands extreme precision. In particular when it comes to a 3D cut, extreme flexibility is required apart from precision. Robotic arms provide such flexibility since they move no matter what their tool’s orientation is. A cutting tool is mounted on their fixture (LASER, PLASMA, WATERJET, ROUTER etc) and the robot follows the cutting path and delivers remarkable results. For easy cutting robot programming, there is dedicated software which generates automatically the robot's source code once the 3D sketch including cutting points is entered. Moreover, the robot may be equipped with various sensors in order to keep the proper distance while cutting, as well as to identify differences between an existing piece and the sketch and to calculate the optimum solution based on tolerances.

Dedicated software for 2D contact and non-contact profilometers The best surface analysis software for all types of 2D profilometer MountainsMap® Profile analyzes surface geometry and basic surface texture, calculating parameters in accordance with ISO 4287 and other standards. Surface analysis reports are created in a comfortable desktop publishing environment and series of measurements can be analyzed automatically using templates. The analysis workflow assures full metrological traceability and makes it easy to fine tune any analysis step. Optional modules are available for advanced 2D surface analysis.

Dedicated spectrometry software for Raman and FTIR spectrometers Visualization & analysis of spectra & hypercubes MountainsMap® HyperSpectral software provides: interactive visualization of spectra, series of spectra and hypercubes hypercube density mapping and compositional analysis 3D analysis of flattened hypercubes. All of this in a comfortable desktop publishing environment where you can create comprehensive and accurate surface analysis reports with ease. Optional modules are available for advanced and specialist applications, including grains and particles analysis.

Dedicated image analysis software for optical microscopes and laboratory images MountainsMap® Image software makes it possible to: Add dimensions to your images and turn them into metrology data. Extract horizontal contours for geometric dimensioning. Quantify binary, grayscale and color-shaded spots, grains and particles. Enhance image quality and remove defects. Convert color images into 3D for better understanding of color variation. Link images with other types of surface data handled by Mountains®.

Dedicated imaging, analysis and metrology software for scanning 3D surface profilometers using contact or non-contact techniques - including stylus profilers, laser triangulation profilers, confocal point sensor profilers, auto-focus profilers and white light interferometers Compatible with all scanning 3D surface profilometers used for surface analysis and metrology. Real time 3D imaging of surface topography - at any zoom level, angle and height amplification. Correct measurement artifacts - spikes, anomalous scan lines, missing data points, tip impact. Analyze surface geometry - distances, angles, areas, volumes, step heights, coplanarity. Apply advanced roughness/waviness filtering techniques - defined in ISO 16610. Analyze surface texture - in accordance with the latest ISO and national standards, including ISO 25178 and ISO 4287. Extract and analyze sub-surfaces - study them just like full measured surfaces. Increase profilometer vertical range virtually in software - combine measurements made at different heights. Easy integration into lab and production environments - export of all numerical results. Add optional modules for advanced surface texture and form analysis, contour analysis, grains and particles analysis, FFT-based analysis and more.