Data cables - Import export

In modern data networks, 4-pair data cables for system-neutral network cabling have been in use for years. These so-called twisted pair data cables are also successfully used in professional audio technology. Especially in large audio control rooms, such as sports stadiums, the management of digital audio signals is just as complex as the network in electronic data processing. The intermediate storage and provision of audio data is also made considerably easier by digital technology.

In modern data networks, 4-pair data cables for system-neutral network cabling have been in use for years. These so-called twisted pair data cables are also successfully used in professional audio technology. Especially in large audio control rooms, such as sports stadiums, the management of digital audio signals is just as complex as the network in electronic data processing. The intermediate storage and provision of audio data is also made considerably easier by digital technology.

In modern data networks, 4-pair data cables for system-neutral network cabling have been in use for years. These so-called twisted pair data cables are also successfully used in professional audio technology. Especially in large audio control rooms, such as sports stadiums, the management of digital audio signals is just as complex as the network in electronic data processing. The intermediate storage and provision of audio data is also made considerably easier by digital technology.

In modern data networks, 4-pair data cables for system-neutral network cabling have been in use for years. These so-called twisted pair data cables are also successfully used in professional audio technology. Especially in large audio control rooms, such as sports stadiums, the management of digital audio signals is just as complex as the network in electronic data processing. The intermediate storage and provision of audio data is also made considerably easier by digital technology.

Solder type D-sub connectors are the most commonly used. The quality of workmanship is very important in the cable connection of the D-sub connector. The use of appropriate equipment and approved solder wire also affects solder connection quality and reliability.

Flat cables with both IDC and dsub connectors. Gold plated dsub contacts requires talent in soldering

26P flat cable with IDC, IDC connectors with locking ears, use of UL certified flat cables

HALOGENFREE, DRY-FILLED INDOOR CABLE The cable is used for data transmission in indoor areas

Strands with a concentric structure made from Cu-ETP1, Cu-OF1 and LEONI Histral® alloys in bare, tin-plated, nickel-plated or silver-plated, soft annealed. Single-wire diameter ranging from Ø 0.05 mm to Ø 0.51 mm, left-hand lay or right-hand lay. Cross-section ranging from 0.02 mm² to 630 mm². The individual wires are subject to an exact positioning around a core wire, which ensures an all-out uniform structure. Concentric strands are particularly appropriate for thin-gauge coating with high-grade isolation materials (extrusions). 7-end strands are especially suited for data cables with high frequencies of transmission. The technical qualities of a concentric strand can be extremely well and accurately customized by combining several different alloy wires.

› CAT 5e UTP › CAT 6 UTP › CAT 5e UTP LSZH › CAT 5e UTP PE › CAT 5e F UTP › CAT 5e F UTP PE › CAT 5e SF UTP › CAT 5e SF UTP LSZH › CAT 5e SF UTP PE › CAT 6 UTP PE › CAT 6 F UTP LSZH › CAT 5e F UTP LSZH › CAT 6 F UTP PE › CAT 6 SF UTP › CAT 6 SF UTP LSZH › CAT 6 SF UTP PE › LI2Y(St)Y-TP PIMF RS232/422 › LI2Y(St)H-TP PIMF RS232/422 › LI2Y(St)CY-TP RS232/422 › LI2Y(St)CH-TP RS232/422 › LI2Y(St)CY-TP PIMF RS232/422 › LI2Y(St)CH-TP PIMF RS232/422 › LIO2Y(St)Y-TP PIMF RS485 › LIO2Y(St)H-TP PIMF RS485 › LIO2Y(St)CY-TP RS485 › LIO2Y(St)CY-TP PIMF RS485 › LIO2Y(St)CH-TP PIMF RS485 › CAT 6 F UTP › CAT 6 UTP LSZH

TKD | 02 Electronic (LF), telecommunication & intrinsically safe systems cables Electronic cables, versatile for low-frequency data transmission systems in electronics and electrical engineering. Telephone cables for indoor and outdoor use in communications technology as well as for fire alarm systems. - PVC- & Halogen-free electronic cables - Electronic & control cables for intrinsically safe circuits - Approved electronic & data cables - Low-capacity data cables - Hook up & installation cables - Halogen-free installation cables - Instrumentation cables - Telecommunication cables Excerpt of versions: > double shielded, shielded, unshielded > stranded in layers, pairs, triples, quads > UV-resistant, Oil-resistant > UL/CSA recognized Excerpt of products: ELITRONIC® - PAARTRONIC® (PVC & FRNC) - DATATRONIC®-CY (UL/CSA) - DATEX-CY - DATEX-PIMF-CY - INDUCOM® RE-2X(St)Yv-fl - INDUCOM® RE-2X(St)Yv-fl PIMF

This is the brand of choice if you want fast, safe and forward-thinking solutions for tranferring data. The range includes data cables for all electronic applications, from tiny cables in coffee machines to those transferring huge amounts of data in supercomputers. Properties: — Robust, durable and reliable. — Suitable for a wide range of uses, including under chemical and mechanical stress, in humid conditions and in various temperatures. — Suitable for fixed connection or energy supply chains. — Also halogen-free and available with international licences.

Do you always want to be aware of the temperature, humidity and pressure in the area where you live or work? Then the EasyLog EL-SIE-6+ data logger is the perfect solution! This advanced device has everything it takes to monitor your environment and gives you direct insight into the circumstances. With the EL-SIE-6+ you don't have to install complicated software on your PC or Mac. The device already has everything on board to get started right away. Connect the data logger with a USB cable and configure the device via your web browser. This way you can quickly and easily view, analyze and download your data

Safe energy and data transmission The igus® Chainflex® cable range offers a choice of over 850 different cables, available from stock. A main focus of the range are the data and bus cables. Solutions based on copper, glass or plastic fiber optic cables are provided for almost all bus systems in industrial use. We continue to provide you with all supply cables for your drive systems such as motor cables with and without brake/tacho cables and the matching feed cables. Ready assembled with plugs and sockets on request. Cost-reducing assembly The use of pre-assembled E-ChainSystems® enables expensive assembly hours at the place of installation to be considerably reduced. Functionally tested systems guarantee that plant components are soon put into operation. Assembly service We would be pleased to send you an offer for complete solutions, including all assembly services. You do not tie up your own resources and you have a trouble-free energy supply system for the future at a fixed price. LBT FLIZZ® - High speeds and accelerations Travel distances up to 120m, travel speed up to 8 m/s Suitable for moving or stationary controls, ideal for all bus systems When light weight is required When quiet, maintenance-free operation is required When rust-proof property is required At -10°C to +60°C constant temperature At accelerations over 10 m/s² Energy supply system for all media, not only electrical Also suitable for outdoor use (with reduced load data) Your benefit from LBT FLIZZ® Guaranteed service life Cost-effective compared with conventional energy supply systems Cable protected against dirt, rain, sun, ice, snow and leaves Insensitive to wind and motion Good resistance to chemicals, solvents, etc. Use of special cables possible, e.g. servo drive cables, fiber optic cables, bus systems etc. almost maintenance free Quick and easy installation due to delivery as a ready-assembled system Easy integration with existing plants Cable length 50% of the travel distance No central cable junction No effort required to maintain carriages Sewage treatment plant Longitudinal scrapers Sand traps Rain water overflow reservoir Galvanizing equipment Cranes Plant construction Space-saving and compact energy supply with LBT FLIZZ® - low maintenance system, delivered pre-fitted with ready-assembled igus® E-Chain Energy supply system protected from wind and weathering. The used materials are weather-resistant, as well as resistant against most chemicals, oils, fats, coolants and solvents Solid plastic with powder-coated support tubes Modular assembly: the system can be enclosed with intermediate panels! Can be delivered pre-fitted Variable fields, which are simply screwed on top of each other Glide rail integrated in the profile

Lux serial server cabinets are high density. It is used for cable and data center need. Since it has a fairly low cost, it is often preferred. Since it is a network cabinet system, it will work for your plans for the future. Cable options are quite well developed. Fiber and cable management is good. If you are in need of high cable management, we will help you with this. In addition to making the capacity of the cable wider, it also provides ease of installation and use. It also makes its maintenance much simpler. It offers a wide range of products and a wide variety of accessories. It is especially very important to save money. It provides an advantage in terms of transportation cost and warehouse space.

We assemble cables according to customer specifications for all kind of applications. In addition to common cable types, we also offer the production of customer-specific special cables, including the manufacture of customer-specific connectors. On the basis of your sample, your specification or technical drawing, we will create an individual offer and support you during the project. We advise you on the selection of suitable materials and offer cost reduction options. We offer you an active co-operation in the development and construction and give suggestions for improvement. For an offer we need: •technical drawing, sketch or pattern •technical specifications, equipment extras •required amount Please send following informations to: info@nh-technology.de One of our engineering experts will contact you asap

6 in 1 USB Lanyard Data Transfering & Charging Cable

Polyamide fibreglass reinforced. Version: Black. Closed. Note: Energy supply chains for safe guiding of flexible electric and data cables as well as pneumatic and hydraulic hoses. The modularly constructed chains can be easily shortened or extended. The material is UV-resistant and therefore also suitable for outdoor applications. Technical data: Technical features in unsupported areas: Speed: 10 m/s Acceleration: 50 m/s²

Counter display for connection of up to two DK probes with adapter cable CE29. Various data outputs can be made possible by installing expansion cards BCD output with LZ71-B card (optional) Comparator function: relay / open collector output with LZ71-KR (optional) Peak value acquisition / hold function Various input functions especially for automated measurements Selectable display resolution Data storage Reset/Preset/Restart With reference point recognition of the connected measuring units Scaling function Flicker control

Fast assembly and perfect organisation Modern machines contain countless power, data and control cables, along with pneumatic hoses. In large systems, the total length of these can quickly add up to several thousand metres. Cable channels make it easier to organise and assemble these cables. The BLOCAN® cable channel system made from anodised aluminium impresses not only with its attractive design, but also through a multitude of well thought out details, which offer the customer considerable added value and greatly facilitate their work. The cable channels in sizes 40, 40x20, 40x80, 80x40 and 80x80 can be supplied as 6 metre bars or cut to length. They are also available with mounting holes, which is a new feature for aluminium cable channels. These can be very quickly attached to a BLOCAN® profile slot by means of a pivoting mounting clip.

Soldering and crimping application, use of 0,35 flry automotive cables.

Shielded cable assembly, dsub connector soldering and metal dsub hoods.Solder type D-sub connectors are the most commonly used. The quality of workmanship is very important in the cable connection of the D-sub connector. The use of appropriate equipment and approved solder wire also affects solder connection quality and reliability. All our cables with D-sub connectors 100% electrically tested.

Samples for shielded cables. Shield types are aluminium foil and copper braid.

Dsub cable assembly and crimping applications, use of ferrit core

Micro-fit terminal and ring terminal crimping, use of flry wires and shrink tube labeling

In line with the needs of the relevant sectors, Belit Electronic has the ability to produce cables in a wide variety from a single cable to cables with hundreds of terminal connections.